Influence of three variables on the stresses in a three-dimensional model of a proximal tibia-total knee implant construct

Bio-Medical Materials and Engineering

Volumn 17, Issue 1, 2007, Pages 19-28

  Sarathi Kopparti, Partha ^a   Lewis, Gladius ^a  

^a University of Memphis   (United States)

Author keywords

Coulomb friction; Finite element analysis; Gap elements; Total knee joint replacement

Indexed keywords

BONE CEMENT; FINITE ELEMENT METHOD; JOINTS (ANATOMY); STRESS ANALYSIS; THREE DIMENSIONAL;

COULOMB FRICTION; GAP ELEMENTS; KNEE JOINT REPLACEMENT;

IMPLANTS (SURGICAL);

ACRYLIC CEMENT;

ANISOTROPY; ARTICLE; CANCELLOUS BONE; CHEMICAL BOND; COMPRESSION; CORTICAL BONE; ELASTICITY; EXPERIMENTAL MODEL; FINITE ELEMENT ANALYSIS; FORCE; FRICTION; LOAD CARRYING CAPACITY; PATELLA LIGAMENT; PRIORITY JOURNAL; QUADRICEPS FEMORIS MUSCLE; STATISTICAL ANALYSIS; STRESS; TIBIA; TOTAL KNEE REPLACEMENT;

BIOMECHANICS; ELASTICITY; FINITE ELEMENT ANALYSIS; HUMANS; IMAGING, THREE-DIMENSIONAL; KNEE PROSTHESIS; MODELS, BIOLOGICAL; MODELS, THEORETICAL; STRESS, MECHANICAL; TIBIA;

EID: 33947527300     PISSN: 09592989     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (31)

1. P. Rullkoetter and S. Gabriel, Viscoelastic behavior of UHMWPE TKR components, in: Transactions of the 46th Annual Meeting of the Orthopaedic Research Society, March 12-15, 2000, Orlando, FL, USA, p. 0562.
2. D. Barrett andM. Taylor, Influence of lift-off on polyethylene stresses in TKR, in: Transactions of the 47th Annual Meeting of the Orthopaedic Research Society, February 25-28, 2001, San Francisco, CA, USA, p. 1024.
3. J.-J. Liau, C.-K. Cheng, C.-H. Huang andW.-H. Lo, The effect of misalignment on stresses in polyethylene component of total knee prostheses - a finite element analysis, Clin. Biomech. 17 (2002), 140-146.
4. J. Dargahi, S. Najarian and S. Amiri, Optimization of the geometry of total knee implant in the sagittal plane using FEA, Bio-Medical Materials and Engineering 13 (2003), 439-449.
5. M. Soncini, L. Vandini and A. Redaelli, Finite element analysis of a knee joint replacement during a gait cycle, J. Appl. Biomater. Biomech. 2 (2004), 45-54.
6. G. Lewis and T. Somayajulu, A parametric finite element study of stresses in a cemented total knee replacement, Innov. Tech. Biol. Med. 14 (1993), 718-730.
7. F.B. Biegler, C. Wong, T.P. Harrigan and J.D. Reuben, Cement stresses under all-polyethylene tibial total knee replacements, in: Transactions of the 42nd Annual Meeting of the Orthopaedic Research Society, February 19-22, 1996, Atlanta, GA, USA, p. 727.
8. S. Miyoshi, T. Takahashi, M. Ohtani, H. Yamamoto and K. Kameyama, Analysis of the shape of the tibial tray in total knee arthroplasty using a three dimension finite element model, Clin. Biomech. 17 (2002), 521-525.
9. J.S. Nyman, S.J. Hazelwood, J.J. Rodrigo, R.B. Martin and O.C. Yeh, Long stemmed total knee arthroplasty with interlocking screws: a computational bone adaptation study, J. Orthop. Res. 21 (2004), 51-57.
10. A. Perillo-Marcone, L. Ryd, K. Johnson and M. Taylor, A combined RSA and FE study of the implanted proximal tibia: correlation of the post-operative mechanical environment with implant migration, J. Biomech. 37 (2004), 1205-1213.
11. M.J. Askew and J.L. Lewis, Analysis of model variables and fixation post length effects on stresses around a prosthesis in the proximal tibia, ASME J. Biomech. Eng. 103 (1981), 239-245.
12. D.L. Bartel, A.H. Burstein, E.A. Santavicca and J.N. Insall, Performance of the tibial component in a total knee replacement: conventional and revision designs, J. Bone Joint Surg. 64-A (1982), 1026-1033.
13. R. Vasu, D.R. Carter, D.J. Schurman and G.S. Beaupré, Epiphyseal-based designs for the tibial plateau components - I. Stress analysis in the frontal plane, J. Biomech. 19 (1986), 647-662.
14. G.S. Beaupré, R. Vasu, D.R. Carter and D.J. Schurman, Epiphyseal-based designs for tibial plateau components - II. Stress analysis in sagittal plane, J. Biomech. 19 (1986), 663-673.
15. A. Garg and P.S. Walker, The effect of the nature of the interface on the bone stresses beneath tibial components, J. Biomech. 19 (1986), 957-967.
16. M. Angelides, A. Shirarazi-Adl, S.C. Shrivastava and A.M. Ahmed, A stress compatible finite element for implant/cement interface analyses, ASME J. Biomech. Eng. 110 (1988), 42-49.
17. R.L. Rakotomanana, P.F. Leyvraz, A. Curnier, J.H. Heegaard and P.J. Rubin, A finite element model for evaluation of tibial prosthesis-bone interface in total knee replacement, J. Biomech. 25 (1992), 1413-1424.
18. M. Taylor, K.E. Tanner and M.A.R. Freeman, Finite element analysis of the implanted proximal tibia: a relationship between the initial cancellous bone stresses and implant migration, J. Biomech. 31 (1998), 303-310.
19. G. Lewis and S.N. Nambu, Influence of the temporal nature of the applied load and tibial baseplate material on the stress distribution in a three-dimensional model of the human knee joint containing a prosthetic replacement, Bio-Medical Materials and Engineering 14 (2004), 203-217.
20. United States National Library of Medicine and National Institute of Health, Website, http://www.nlm.nih.gov/research/visible/applications.html
21. L. Cristofilini and M. Viceconti, Mechanical validation of whole bone composite tibia model, J. Biomech. 33 (2000), 279-288.
22. A.K. Mishra, J.A. Davidson, P. Kovacs and R.A. Poggie, Ti-13Nb-13Zr: a new low-modulus, high strength, corrosionresistant near-beta alloy for orthopaedic implants, in: Beta Titanium Alloys for the 1990s, D. Eylon, R.R. Boyer and D.A. Koss, eds, The Minerals, Metals, and Materials Society, Warrendale, PA, USA, 1994, pp. 61-72.
23. J.B. Morrison, The mechanics of the knee joint in relation to normal walking. J.Biomech. 3 (1970), 51-60.
24. D.E. Hurwitz, D.R. Sumner, T.P. Andriacchi and D.A. Sugar, Dynamic knee loads during gait predict proximal tibial bone distribution, J. Biomech. 31 (1998), 423-430.
25. N. Nuño, M. Amabili, R. Groppetti and A. Rossi, Static coefficient friction between Ti-6Al-4V and PMMA for cemented hip and knee implants, J. Biomed. Mater. Res. Part A 59 (2002), 191-200.
26. S.C. Cowin, Bone Mechanics, CRC Press, Boca Raton, FL, USA,1989.
27. A. Pollikeit, S.J. Ferguson, L.P. Nolte and T.E. Orr, Factors influencing stresses in the lumbar spine after insertion of intervertebral cages: finite element analysis, Eur. Spine J. 12 (2003), 413-420.
28. W. Mesfar, A. Shirazi-Adl and M. Dammak, Modeling of biomedical interfaces with nonlinear friction properties, Bio-Medical Materials and Engineering 13 (2003), 91-101.
29. P.S. Walker, D. Schneeweiss, S. Murphy and P. Nelson, Strains and micro motions of press-fit femoral stem prostheses, J. Biomech. 20 (1987), 693-702.
30. D.L. Bartel, J.J. Rawlinson, A.H. Burstein, C.S. Ranawat and W.F. Flynn Jr., Stresses in polyethylene components of contemporary total knee replacement, Clin. Orthop. Rel. Res. 317 (1995), 76-82.
31. E.A. Reeves, D.C. Barton, D.P. FitzPatrick and J.A. Fisher, A two-dimensional model of cyclic strain accumulation in ultra-high molecular weight polyethylene knee replacements, Proc. Inst. Mech. Eng. 212, Part H (1998), 189-198.