Fatigue behavior of high temperature inorganic matrix composites

Journal of Materials in Civil Engineering

Volumn 19, Issue 4, 2007, Pages 321-328

  Papakonstantinou, Christos G ^a   Balaguru, Perumalsamy N ^b  

^a Department of Electrical and Computer Engineering   (United States)

^b RUTGERS UNIVERSITY   (United States)

Author keywords

Composite materials; Fatigue; Fire resistance; Inorganic chemicals; Temperature effects

Indexed keywords

CYCLIC LOADS; FATIGUE OF MATERIALS; FIRE RESISTANCE; HIGH TEMPERATURE APPLICATIONS; INORGANIC CHEMICALS; LAMINATES; MICROCRACKS; STIFFNESS; STRENGTH OF MATERIALS; THERMAL EFFECTS;

GEOPOLYMER; INORGANIC MATRIX COMPOSITES; POLYSIALATE;

POLYMER MATRIX COMPOSITES;

COMPOSITE; DEGRADATION; FAILURE ANALYSIS; FATIGUE; HIGH TEMPERATURE; LOADING; MATRIX; MICROCRACK; MICROSCOPY; STIFFNESS; STRENGTH;

EID: 33947386981     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0899-1561(2007)19:4(321)     Document Type: Article

References (34)

1. ASTM. (1992). "Standard test method for flexural properties of unreinforced and reinforced plastics and electrical insulating materials." Philadelphia, 8.01, 269-278.
2. Caprino, G., and Giorleo, G. (1999). "Fatigue lifetime of glass fabric/epoxy composites." Composites, Part A CASMFJ1359-835X10.1016/ S1359-835X(98)00124-9, 30(3), 299-304.
3. De Almeida, Sergio Frascino Muller, Neto, and Zabulon dos Santos Nogueira. (1994). "Effect of void content on the strength of composite laminates." Civ. Eng. Syst. CEESFT1028-6608, 28(2), 139-148.
4. Demers, C. E. (1998). "Fatigue strength degradation of E-glass FRP composites and carbon FRP composites." Constr. Build. Mater. CBVME20950-0618, 12(5), 311-318.
5. Dharan, C. K. H. (1975). "Fatigue of composite materials." ASTM STP 569, ASTM, Philadelphia, 171-188.
6. Dyer, K. P., and Isaac, D. H. (1998). "Fatigue behaviour of continuous glass fibre reinforced composites." Composites, Part B CPBEFF1359-8368, 29(6), 725-733.
7. Ferreira, J. A. M., Costa, J. D. M., and Richardson, M. O. W. (1997). "Effect of notch and test conditions on the fatigue of a glass-fibre-reinforced polypropylene composite." Compos. Sci. Technol. CSTCEH0266-3538, 57(9-10), 1243-1248.
8. Foden, A. J. (1999). "Mechanical properties and material characterization of polysialate structural composites." Dissertation, Rutgers, State Univ. of New Jersey, New Brunswick, N.J.
9. Foden, A. J., Lyon, R. E., and Balaguru, P. N. (1996). "High temperature inorganic resins for use in fiber reinforced composites." 1st Int. Conf. on Composites in the Infrastructure (ICCI), Tucson, Ariz., 166-177.
10. Foringer, M. A., Robertson, D. D., and Mall, S. (1997). "A micromechanistic-based approach to fatigue life modeling of titanium-matrix composites." Composites, Part B CPBEFF1359-8368, 28(B), 507-521.
11. Hammell, J. A. (2000). "The influence of matrix composition and reinforcement type on the properties of polysialate composites." Dissertation, Rutgers, State Univ. of New Jersey, New Brunswick, N.J.
12. Hammell, J. A., Balaguru, P., and Lyon, R. E. (1998). "Influence or reinforcement types on the flexural properties of geopolymer composites." 1998 SAMPE Int. Symp., Long Beach, Calif., 43-47.
13. Harik, V. M., Klinger, J. R., and Bogetti, T. A. (2002). "Low-cycle fatigue of unidirectional composites: Bi-linear S-N curves." Int. J. FatigueI JFADB0142-1123, 24(2-4), 455-462.
14. Harris, B., Reiter, H., Adam, T., Dickson, R. F., and Fernando, G. (1990). "Fatigue behavior of carbon fiber reinforced plastics." Composites CPSOAN0010-4361, 21(3), 232-242.
15. Hartwig, G., Hübner, R., Knaak, S., and Pannkoke, C. (1998). "Fatigue behaviour of composites." Cryogenics CRYOAX0011-2275, 38, 75-78.
16. Kaya, C., Kaya, F., and Mori, H. (2002). "Damage assessment of alumina fibre-reinforced mullite ceramic matrix composites subjected to cyclic fatigue at ambient and elevated temperatures." J. Eur. Ceram. Soc. JECSER0955-2219, 22(4), 447-452.
17. Kobayashi, S., and Takeda, N. (2002). "Experimental and analytical characterization of transverse cracking behavior in carbon/bismaleimide cross-ply laminates under mechanical fatigue loading." Composites, Part B CPBEFF1359-8368, 33(6), 471-478.
18. Kurtz, S., and Balaguru, P. (2001). "Comparison of inorganic and organic matrices for strengthening of RC beams with carbon sheets." J. Struct. Eng. JSENDH0733-944510.1061/(ASCE)0733-9445(2001)127:1(35), 127(1), 35-42.
19. Li, Chingshen, Ellyin, F., Koh, S., and Oh, S. J. (2000). "Influence of porosity on fatigue resistance of cast SiC particulate-reinforced Al-Si alloy composite." Mater. Sci. Eng., A MSAPE30921-509310.1016/S0921-5093(99)00175-6 276(1-2), 218-225.
20. Lyon, R. E., Balaguru, P. N., Foden, A., Sorathia, U., Davidovits, J., and Davidovits, M. (1997). "Fire-resistant aluminosilicate composites." Fire Mater. FMATDV0308-050110.1002/ (SICI)1099-1018(199703)21:2<67::AID-FAM596>3.3.CO;2-E, 21(2), 67-73.
21. Ma, C. C., Chan, H. W., Chang, M. J., Ong, C. L., and Sheu, M. F. (1992). "Fatigue behavior of carbon fiber reinforced polyetheretherkeytone (PEEK) laminated composites." 37th Int. SAMPE Symp., Long Beach, Calif., 559-568.
22. Mahfuz, H., Maniruzzaman, M., Krishnagopalan, J., Haque, A., Ismail, M., and Jeelani, S. (1995). "Effects of stress ratio on fatigue life of carbon-carbon composites." Theor. Appl. Fract. Mech. TAFME40167-8442, 24(1), 21-31.
23. McNulty, J. C., and Zok, F. W. (1998). "Low-cycle fatigue of Nicalon(TM)-fiber-reinforced ceramic composites." Compos. Sci. Technol. CSTCEH0266-3538, 59(10), 1597-1607.
24. Michel, S. A., and Martens, H. J. (2003). "Fatigue resistance of carbon fiber reinforced polymers up to the gigacycle regime." Int. Committee on Aeronautical Fatigue, 28th ICAF Conf.-Fatigue of Aeronautical Structures and Engineering Challenge, Lucerne, Switzerland, 26-29.
25. Miriyala, N., Liaw, P. K., McHargue, C. J., and Snead, L. L. (1998). "The mechanical behavior of a Nicalon/SiC composite at room temperature and 1000 C." J. Nucl. Mater. JNUMAM0022-3115, 253(1-3), 1-9.
26. Pandita, Surya, D., Huysmans, G., Wevers, M., and Verpoest, I. (2001). "Tensile fatigue behaviour of glass plain-weave fabric composites in on- and off-axis directions." Composites, Part A CASMFJ1359-835X, 32(10), 1533-1539.
27. Papakonstantinou, C. G., Balaguru, P., and Lyon, R. E. (2002). "Comparative study of high temperature composites." Composites, Part B CPBEFF1359-836810.1016/S1359-8368(01)00042-7, 32(8), 637-649.
28. Reynaud, P. (1996). "Cyclic fatigue of ceramic-matrix composites at ambient and elevated temperatures." Compos. Sci. Technol. CSTCEH0266-353810.1016/0266-3538(96)00025-5, 56(7), 809-814.
29. Vanwijgenhoven, E., Wevers, M., and van der Biest, O. (1999). "Influence of the laminate lay-up on the fatigue behaviour of SiC-fibre/BMAS-matrix composites." Composites, Part A CASMFJ1359-835X, 30(5), 623-635.
30. Wachtman, J. B. (1996). Mechanical properties of ceramics, Wiley, New York, 235-247.
31. Wang, P. C., and Yang, J. M. (1997). "Simulation of fatigue cracking and life distribution of SCS-6 fiber-reinforced orthorhombic titanium aluminide composites." Mater. Sci. Eng., A MSAPE30921-5093, 222(2), 101-108.
32. Wharmby, A. W., Ellyin, F., and Wolodko, J. D. (2003). "Observations on damage development in fibre reinforced polymer laminates under cyclic loading." Int. J. FatigueI JFADB0142-1123, 25(5), 437-446.
33. Yasmin, A., and Bowen, P. (2004). "Fatigue behavior of cross-ply Nicalon/CAS-II glass-ceramic matrix composite at room and elevated temperatures." Composites, Part A CASMFJ1359-835X, 35, 83-94.
34. Zhai, T., Xu, Y. G., Martin, J. W., Wilkinson, A. J., and Briggs, G. A. D. (1999). "A self-aligning four-point bend testing rig and sample geometry effect in four-point bend fatigue." Int. J. FatigueI JFADB0142-1123, 21(9), 889-894.