Development of chlorotriazine polymer dehydrocondensing reagents (Poly-Trzs)

Tetrahedron

Volumn 63, Issue 12, 2007, Pages 2604-2612

  Kunishima, Munetaka ^a,b   Yamamoto, Kazuyoshi ^a   Hioki, Kazuhito ^a   Kondo, Tomohito ^a   Hasegawa, Masumi ^a   Tani, Shohei ^a  

^a KOBE GAKUIN UNIVERSITY   (Japan)

^b JAPAN SCIENCE AND TECHNOLOGY AGENCY   (Japan)

Author keywords

Dehydrocondensing reagent; Immobilized reagent; Polymer; Triazine

Indexed keywords

1,11 BIS(4,6 DICHLORO 1,3,5 TRIAZIN 2 YLOXY) 3,6,9 TRIOXAUNDECANE; 2 (4 METHOXYPHENYL) N PHENETHYLACETAMIDE; 2 CHLORO 4,6 DIMETHOXY 1,3,5 TRIAZINE; 2 CHLORO 6 ETHYLAMINO 4 METHOXY 1,3,5 TRIAZINE; 4 (4,6 DIMETHOXY 1,3,5 TRIAZIN 2 YL) 4 METHYLMORPHOLINIUM; 4 METHYLMORPHOLINE; ALCOHOL; AMIDE; CARBOXYLIC ACID; CHLORINE DERIVATIVE; CYANURIC CHLORIDE; MORPHOLINE DERIVATIVE; N (1 PHENYLETHYL) 3 PHENYLPROPANAMIDE; N (2 HYDROXYETHYL) 3 PHENYLPROPANAMIDE; N BENZYL N METHYL 3 PHENYLPROPANAMIDE; N PHENETHYL 3 PHENYLPROPANAMIDE; N PHENETHYLBENZAMIDE; N PHENETHYLCINNAMAMIDE; N,N DIETHYL 3 PHENYLPROPANAMIDE; ORGANIC SOLVENT; TRIAZINE DERIVATIVE; UNCLASSIFIED DRUG;

ARTICLE; CHEMICAL BINDING; DRUG SYNTHESIS; ISOLATION PROCEDURE; POLYMERIZATION; PRIORITY JOURNAL;

TETRA;

EID: 33846934508     PISSN: 00404020     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.tet.2007.01.034     Document Type: Article

References (59)

1. Ley S.V., Baxendale I.R., Bream R.N., Jackson P.S., Leach A.G., Longbottom D.A., Nesi M., Scott J.C., Storer R.I., and Taylor S.J. J. Chem. Soc., Perkin Trans. 1 (2000) 3815-4195
2. Kirschning A., Monenschein H., and Wittenberg R. Angew. Chem., Int. Ed. 40 (2001) 650-679
3. Tzschucke C.C., Markert C., Bannwarth W., Roller S., Hebel A., and Haag R. Angew. Chem., Int. Ed. 41 (2002) 3694-4000
4. McNamara C.A., Dixon M.J., and Bradley M. Chem. Rev. 102 (2002) 3275-3300
5. Fridkin M., Patchornik A., and Katchalski E. J. Am. Chem. Soc. 88 (1966) 3164-3165
6. Kalir R., Fridkin M., and Patchornik A. Eur. J. Biochem. 42 (1974) 151-156
7. Huang X., Chan C.-C., and Zhou Q.-S. Synth. Commun. 12 (1982) 709-714
8. Cohen B.J., Karoly-Hafeli H., and Patchornik A. J. Org. Chem. 49 (1984) 922-924
9. Kim K., and Le K. Synlett (1999) 1957-1959
10. Pop I.E., Déprez B.P., and Tartar A.L. J. Org. Chem. 62 (1997) 2594-2603
11. Dendrinos K., Jeong J., Huang W., and Kalivretenos A.G. Chem. Commun. (1998) 499-500
12. Dendrinos K.G., and Kalivretenos A.G. Tetrahedron Lett. 39 (1998) 1321-1324
13. Adamczyk M., Fishpaugh J.R., and Mattingly P.G. Tetrahedron Lett. 40 (1999) 463-466
14. Chinchilla R., Dodsworth D.J., Nájera C., and Soriano J.M. Tetrahedron Lett. 42 (2001) 4487-4489
15. Andreev S.M., Tsiryapkin V.A., Samoilova N.A., Mironova N.V., Davidovich Y.A., and Rogozhin S.V. Synthesis (1977) 303-304
16. Barrett A.G.M., Cramp S.M., Roberts R.S., and Zecri F.J. Org. Lett. 2 (2000) 261-264
17. Arnauld T., Barrett A.G.M., Hopkins B.T., and Zécri F.J. Tetrahedron Lett. 42 (2001) 8215-8217
18. Barrett A.G.M., Smith M.L., and Zecri F.J. Chem. Commun. (1998) 2317-2318
19. Chen J., Dixon B.R., Dumas J., and Brittelli D. Tetrahedron Lett. 40 (1999) 9195-9199
20. Akiyama M., Shimizu K., Aiba S., and Katoh H. Bull. Chem. Soc. Jpn. 58 (1985) 1421-1425
21. Svirskaya P.I., Leznoff C.C., and Steinman M. J. Org. Chem. 52 (1987) 1362-1364
22. Weidner J.J., Parlow J.I., and Flynn D.L. Tetrahedron Lett. 40 (1999) 239-242
23. Golisade A., Calenbergh S.V., and Link A. Tetrahedron 56 (2000) 3167-3172
24. Brown J., and Williams R.E. Can. J. Chem. 49 (1971) 3765-3766
25. Weinshenker N.M., and Shen C.-M. Tetrahedron Lett. (1972) 3285-3288
26. Weinshenker N.M., Shen C.-M., and Wong J.Y. Org. Synth. Coll. Vol. VI (1988) 951-954
27. Chinchilla R., Dodsworth D.J., Nájera C., and Soriano J.M. Tetrahedron Lett. 41 (2000) 2463-2466
28. Disadee W., Watanabe T., and Ishikawa T. Synlett (2003) 115-117
29. Valeur E., and Bradley M. Chem. Commun. (2005) 1164-1166
30. Desai M.C., and Stramiello L.M.S. Tetrahedron Lett. 34 (1993) 7685-7688
31. Sturino C.F., and Labelle M. Tetrahedron Lett. 39 (1998) 5891-5894
32. Crosignani S., Gonzalez J., and Swinnen D. Org. Lett. 6 (2004) 4579-4582
33. Convers E., Tye H., and Whittaker M. Tetrahedron Lett. 45 (2004) 3401-3404
34. Kunishima M., Kawachi C., Iwasaki F., Terao K., and Tani S. Tetrahedron Lett. 40 (1999) 5327-5330
35. Kunishima M., Kawachi C., Morita J., Terao K., and Tani S. Tetrahedron 55 (1999) 13159-13170
36. Kaminski Z.J., Paneth P., and Rudzinski J. J. Org. Chem. 63 (1998) 4248-4255
37. Falchi A., Giacomelli G., Porcheddu A., and Taddei M. Synlett (2000) 275-277
38. Kunishima M., Kawachi C., Hioki K., Terao K., Iwasaki F., and Tani S. Tetrahedron 57 (2001) 1551-1558
39. Of course, the dehydrocondensing reaction can be performed efficiently in commonly used neutral aprotic organic solvents (Ref. 10).
40. Kunishima M., Hioki K., Wada A., Kobayashi H., and Tani S. Tetrahedron Lett. 43 (2002) 3323-3326
41. For preliminary reports, see:
42. Kunishima M., Yamamoto K., Watanabe Y., Hioki K., and Tani S. Chem. Commun. (2005) 2698-2700
43. Hioki K., Yamamoto K., Tani S., and Kunishima M. Pept. Sci. (2006) 485-486
44. Kaminski Z.J. Biopolymers 55 (2000) 140-164
45. Blotny G. Tetrahedron 62 (2006) 9507-9522
46. Masala S., and Taddei M. Org. Lett. 1 (1999) 1355-1357
47. Luo G., Xu L., and Poindexter G.S. Tetrahedron Lett. 43 (2002) 8909-8912
48. Falchi A., and Taddei M. Org. Lett. 22 (2000) 3429-3431
49. For polymer dehydrocondensing reagents, catalytic decarbonylation of highly toxic diisocyanatohexane was reported to give hexamethylenecarbodiimide as a linear polymeric structure (Ref. 19a). More recently, a high-loading polymer-gel carrying fluoroformamidinium salt was prepared by ring opening metathesis polymerization (ROMP) (Ref. 19b).
50. Wolman Y., Kivity S., and Frankel M. J. Chem. Soc., Chem. Commun. (1967) 629-630
51. Barrett A.G.M., Bibal B., Hopkins B.T., Köbberling J., Love A.C., and Tedeschi L. Tetrahedron 61 (2005) 12033-12041
52. de Hoog P., Gamez P., Driessen W.L., and Reedijk J. Tetrahedron Lett. 43 (2002) 6783-6786
53. Both the degree of polymerization and cross-linking are unclear because Poly-O-Trz-Cl is insoluble in any common solvents.
54. The yield was calculated based on the theoretical structure.
55. CDMT cannot react directly with carboxylic acid whereas DMT-MM can react with carboxylic acid leading to the formation of amides or esters (Ref. 24). Therefore, the addition of NMM to Poly-Trz-Cl to generate Poly-Trz-MM is essential for dehydrocondensation.
56. Kunishima M., Yoshimura K., Morigaki H., Kawamata R., Terao K., and Tani S. J. Am. Chem. Soc. 123 (2001) 10760-10761
57. With regard to the cross-linking Poly-N-Trz-Cl, the tertiary amino group derived from cross-linker 7 contained a chloride anion as a hydrochloride, to some extent because hydrogen chloride was produced in the synthetic process of the polymer. Therefore, first, the chloride anion was exchanged for a nitrate anion by treatment with an excess amount of an aqueous sodium nitrate, and then, the amount of chloride anion newly released from the chlorotriazino group by treatment with NMM to form Poly-N-Trz-MM was determined according to the method mentioned above.
58. 100.
59. Miyazawa T., Ensatsu E., Hiramatsu M., Yanagihara R., and Yamada T. J. Chem. Soc., Perkin Trans. 1 (2002) 396-401