Virtual engineering approaches in product and process design

International Journal of Advanced Manufacturing Technology

Volumn 31, Issue 9-10, 2007, Pages 846-856

  Cecil, J ^a   Kanchanapiboon, A ^a  

^a Horeshoe Cir Jett Hall   (United States)

Author keywords

Virtual manufacturing; Virtual prototyping; Virtual reality

Indexed keywords

COMPUTER AIDED ENGINEERING; COST EFFECTIVENESS; PRODUCT DESIGN; SOFTWARE PROTOTYPING; VIRTUAL REALITY;

VIRTUAL ENGINEERING; VIRTUAL MANUFACTURING; VIRTUAL PROTOTYPING;

PROCESS ENGINEERING;

EID: 33846251982     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-005-0267-7     Document Type: Article

References (41)

1. Alex J, Vikramaditya B, Nelson BJ (1998) A virtual reality teleoperator interface for assembly of hybrid MEMS prototypes. In: Proceedings of the 1998 ASME Design Engineering Technical Conferences and Computers in Engineering Conference (DETC'98), Atlanta, Georgia, September 1998
2. Angster SR, Jayaram S (1996) VEDAM: virtual environments for design and manufacturing. In: Proceedings of the Symposium on Virtual Reality in Manufacturing Research and Education, Chicago, Illinois, October 1996
3. Banerjee A, Banerjee P, DeFanti T, Hudson A (2000) A behavioral layer architecture for telecollaborative virtual manufacturing operations. IEEE Trans Robotic Autom 16 (3);218-227
4. Banerjee P, Kesavadas T (1999) Industrial virtual reality: manufacturing and design tool for the next millenium. In: Proceedings of the NIST-ASME Industrial Virtual Reality Symposium, Symposium on Virtual Environment for Manufacturing, Chicago, Illinois, November 1999
5. Barrus JW (1993) The virtual workshop: a simulated environment for mechanical design. PhD dissertation, Massachusetts Institute of Technology, Cambridge, Massachusetts
6. Bierbaum A, Just C, Hartling P, Meinert K, Baker A, Cruz-Neira C (2001) VR juggler: a virtual platform for virtual reality application development. In: Proceedings of the IEEE Virtual Reality 2001 Conference, Yokohama, Japan , March 2001, pp 89-97
7. Bodner DA, Damrau M, Griffin PM, McGinnis LF, McLaughlin A (1999) Virtual prototyping of electronics assembly systems. Electron Manuf Eng 14(3):1-5
8. Cecil JA, Kanchanapiboon A, Kanda P, Muthaiyan A (2002) A virtual prototyping test bed for electronics assembly. In: Proceedings of the 27th Annual IEMT/IEEE International Electronics Manufacturing Technology Symposium, San Jose, California, July 2002, pp 130-135
9. Cecil J (2004) VIRAM: a virtual reality environment for the assembly of micro devices. In: Proceedings of the 24th ASME International Computers and Information in Engineering (CIE) conference, Salt Lake City, Utah, September/October 2004
10. Cecil J et al (2005) Development of a physical and virtual work cell to support the assembly of micro devices. Robot Comput Integr Manuf (in press)
11. Cecil J (2003) A virtual prototyping environment for the assembly of nanosatellites. In: Proceedings of the HE Annual Research Conference, Portland, Oregon, May 2003
12. Chryssolouris G, Mavrikios D, Fragos D, Karabatsou V (2000) Virtual reality based experimentation environment for the verification of human-related factors in assembly processes. Robot Comput Integr Manuf 16:267-276
13. Chung C, Peng Q (2003) The development of a web-centered VR-CAPP system. In: Proceedings of the International Conference on Agile Manufacturing (ICAM 2003), Beijing, China, December 2003, pp 369-376
14. Dani T, Gadh R (1997) Creation of concept shape designs via a virtual reality interface. Comput Aided Des 29(8):555-563
15. Deitz D (1998) Modeling a virtual ocean. Mechanical Engineering Magazine, May 1998, pp 66-68. Available online at: http://www.memagazine.org/backissues/ may98/features/ocean/ocean.html
16. Deviprasad T, Kesavadas T (1999) VPAVE: an interactive tool for validating assembly components in virtual environments using finite element simulation. In: Industrial VR: manufacturing and design tool for the next millennium. ASME Press, pp 107-116
17. Faisstnauer C, Purgathofer W, Gervautz M, Gascuel J (2001) Construction of an open geometry server for client-server virtual environments. In: Proceedings of the IEEE VR 2001 Conference, Yokohama, Japan, March 2001, pp 105-112
18. Internet2 (2004) Home page at: http://www.internet2.edu/about/
19. Jasnoch U, Anderson B, Joseph H (1996) Shared 3D environments within a virtual prototyping environment. In: Proceedings of the 5th International Workshop on Enabling Technologies: Infrastructure for Collaborative Enterprises (WET-ICE'96), Stanford, California, June 1996, pp 274-279
20. Jayaram S, Vance J, Gadh R, Jayaram U, Srinivasan H (2001) Assessment of VR technology and its applications to engineering problems. J Comput Inf Sci Eng 1(1):72-83
21. Jayaram S, Jayaram U, Wang Y, Tirumali H, Lyons K, Hart P (1999) VADE: a virtual assembly design environment. IEEE Comput Graph Appl 19(6):44-50
22. Jayaram S, Wang Y, Jayaram U, Lyons K, Hart P (1999) A virtual assembly design environment. In: Proceedings of the IEEE Virtual Reality Conference (VR'99), Houston, Texas, March 1999, pp 172-179
23. Kelsick J, Vance JM, Buhr L, Moller C (2002) Discrete event simulation implemented in a virtual environment. J Mech Des-Trans ASME 125(3):428-433
24. Kesavadas T, Ernzer M (1999) Design of virtual factory using cell formation methodologies. In: Industrial virtual reality: manufacturing and design tool for the next millennium, Proceedings of the ASME Symposium on Virtual Reality Environments for Manufacturing, Nashville, Tennessee, November 1999, MH 5, pp 201-208
25. Kim CE, Vance JM (2004) Collision detection and part interaction modeling to facilitate immersive virtual assembly methods. J Comput Inf Sci Eng 4(2):83-90
26. Kurth GR, Gadh R (1997) Virtual prototyping of die-design: determination of die-open directions for near-net-shape manufactured parts with extruded or rotational features. Comput Integr Manuf Syst 10(1):69-81
27. Leigh J, Johnson AE, DeFanti TA, Brown M et al (1999) A review of tele-immersive applications in the CAVE research network. In: Proceedings of the IEEE Virtual Reality Conference (VR'99), Houston, Texas, March 1999, pp 180-187
28. Li R, Fang M, Zhang W, Ma Y (2001) Simulation of vertical planetary mill based on virtual prototyping. J Uni v Sci Tech Beijing 8(2):86-90
29. Mikchevitch A, Leon JC, Gouskov A (2004) Flexible beam part manipulation for assembly operation simulation in a virtual reality environment. J Comput Inf Sci Eng 4(2):114-123
30. Mok SM, Wu C-H, Lee DT (2001) Modeling automatic assembly and disassembly operations for virtual manufacturing. IEEE Trans Syst Man Cybern A 31(3):223-232
31. Peng QJ, Loftus M (1999) Analysis of 3D construction approaches to support the virtual manufacturing process. In: Proceedings of the International Conference on Advanced Manufacturing Technology (ICAMT'99), Xian, China, June 1999, pp 653-657
32. Ren W, Zhang Y, Song J (1999) Virtual prototype technology in automotive concurrent design. National Key Laboratory, Automotive Safety and Conservation. Beijing, China
33. Shao Z, Gong YD, Wang WS (2001) Modeling and simulation of virtual grinding machine. Key Eng Mater 202-203:259-264
34. Sharma R, Molineros J, Raghavan V (1997) Interactive evaluation of assembly sequences with mixed (real and virtual) prototyping. In: Proceedings of the IEEE International Symposium on Assembly and Task Planning (ISATP'97), New York, August 1997
35. Siddique Z, Rosen DW (1997) A virtual prototyping approach to product disassembly reasoning. Comput Aided Des 29 (12):847-860
36. Smith RP, Heim JA (1999) Virtual facility layout design: the value of an interactive three-dimensional representation. Int J Prod Res 37(17):3941-3957
37. Staadt OG, Näf M, Lamboray E, Würmlin S (2001) JAPE; a prototyping system for collaborative virtual environments. In; Proceedings of the Eurographics 2001 conference, Manchester, UK, September 2001, vol 20, issue 3
38. Tramberend H (1999) Avocado: a distributed virtual reality framework, In: Proceedings of the IEEE Virtual Reality Conference (VR'99), Houston, Texas, March 1999, pp 14-21
39. Volkov S, Vance JM (2001) Effectiveness of haptic sensation for the evaluation of virtual prototypes. J Comput Inf Sci Eng 1 (2):123-128
40. Yun MH, Cannon D, Freivalds A, Thomas G (1997) An instrumented glove for grasp specification in virtual-reality-based point-and-direct telerobotics. IEEE Trans Syst Man Cybern B 27(5):835-846
41. Zhao Z (1998) A variant approach to constructing and managing virtual manufacturing environments. Int J Comput Integr Manuf 11(6):485-499