Micromachined antenna stents and cuffs for monitoring intraluminal pressure and flow

Journal of Microelectromechanical Systems

Volumn 15, Issue 5, 2006, Pages 1289-1298

  Takahata, Kenichi ^a,b   Gianchandani, Yogesh B ^a   Wise, Kensall D ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

^b UNIVERSITY OF BRITISH COLUMBIA   (Canada)

Author keywords

Bloodflow; Cardiac; Microelectrodischarge machining; Sensor network; Wireless

Indexed keywords

ANGIOPLASTY BALLOONS; MICROELECTRODISCHARGE MACHINING; MICROMACHINED ANTENNA STENTS AND CUFFS; STENTENNA;

BIOLOGICAL MATERIALS; BIOMATERIALS; BIOMEDICAL EQUIPMENT; HEMODYNAMICS; MICROMACHINING; STAINLESS STEEL; TELEMETERING;

ELECTRIC DISCHARGE MACHINING;

EID: 33750025146     PISSN: 10577157     EISSN: None     Source Type: Journal    
DOI: 10.1109/JMEMS.2006.880229     Document Type: Article

References (42)

1. E. R. Edelman and C. Rogers, "Pathobiologic responses to stenting," Amer. J. Cardiol., vol. 81, no. 7A, pp. 4E-6E, 1998.
2. M. D. Addis, D. T. Baril, S. H. Ellozy, T. Jakobs, A. Carroccio, V. Teodorescu, and M. L. Marin, "Endovascular therapy for aortic disease," Surg. Technol. Int., vol. 13, pp. 221-226, 2004.
3. P. L. Faries, R. Dayal, J. Rhee, S. Trocciola, and K. C. Kent, "Stent graft treatment for abdominal aortic aneurysm repair: Recent developments in therapy," Current Opin. Cardiol., vol. 19, no. 6, pp. 551-557, Nov. 2004.
4. "Abdominal aortic aneurysms," Physician's Week., vol. 1, no. 5, Apr. 2004.
5. N. Al-Mubarak and S. S. Iyer, "Carotid artery stenting for the high surgical risk patients," J. Cardiovasc. Surg., vol. 46, no. 1, pp. 1-8, Feb. 2005.
6. S. N. Cullen and R. W. Chapman, "Review article: Current management of primary sclerosing cholangitis," Alimentary Pharmacol. Therap., vol. 21, no. 8, pp. 933-948, Apr. 2005.
7. K. E. Monkemuller, S. Kahl, and P. Malfertheiner, "Endoscopic therapy of chronic pancreatitis," Digest. Diseases, vol. 22, no. 3, pp. 280-291, 2004.
8. Y. Saito and H. Imamura, "Airway stenting," Surg. Today, vol. 35, no. 4, pp. 265-270, 2005.
9. R. L. Carrau, "Use of stents in head and neck surgery," Current Opin. Otolaryngol. Head Neck Surg., vol. 13, no. 2, pp. 105-106, Apr. 2005.
10. A. DeHennis and K. D. Wise, "A double-sided single-chip wireless pressure sensor," in Proc. IEEE Int. Conf. Micro Electro Mechan. Syst. (MEMS), 2002, pp. 252-255.
11. E. Park, J. Yoon, and E. Yoon, "Hermetically sealed inductor-capacitor (LC) resonator for remote pressure monitoring," Japan. J. Appl. Phys., vol. 37, pp. 7124-7128, 1998.
12. O. Akar, T. Akin, and K. Najafi, "A wireless batch sealed absolute capacitive pressure sensor,"Sens. Actuators A, vol. 95, pp. 29-38, 2001.
13. M. A. Fonseca, J. M. English, M. von Arx, and M. G. Allen, "Wireless micromachined ceramic pressure sensor for high-temperature applications," J. Microelectromech. Syst., vol. 11, no. 4, pp. 337-343, Aug. 2002.
14. A. DeHennis and K. D. Wise, "A fully-integrated multi-site pressure sensor for wireless arterial flow characterization," J. Microelectromech. Syst., vol. 15, no. 3, pp. 678-685, Jun. 2006.
15. S. Canic, K. Ravi-Chandar, Z. Krajcer, D. Mirkovic, and S. Lapin, "Mathematical model analysis of wallstent™ and AneuRX™: Dynamic responses of bare-metal endoprosthesis compared with those of stent-graft," Texas Heart Inst. J., vol. 32, no. 4, pp. 502-506, 2005.
16. K. Takahata and Y. B. Gianchandani, "A planar approach for manufacturing cardiac stents: Design, fabrication, and mechanical evaluation," J. Microelectromech. Syst., vol. 13, no. 6, pp. 933-939, 2004.
17. K. Takahata and Y. B. Gianchandani, "Batch mode microelectrodischarge machining," J. Microelectromech. Syst., vol. 11, no. 2, pp. 102-110, 2002.
18. K. Takahata, A. DeHennis, K. D. Wise, and Y. B. Gianchandani, "Stentenna: A micromachined antenna stent for wireless monitoring of implantable microsensors," in Proc. IEEE Int. Conf. Eng. Med. Biol. Soc. (EMBS), 2003, pp. 3360-3363.
19. K. Takahata, A. DeHennis, K. D. Wise, and Y. B. Gianchandani, "A wireless microsensor for monitoring flow and pressure in a blood vessel utilizing a dual-inductor antenna stent and two pressure sensors," in Proc. IEEE Int. Conf. Micro Electro Mech. Syst. (MEMS), 2004, pp. 216-219.
20. K. Takahata and Y. B. Gianchandani, "A micromachined stainless steel cuff for electromagnetic measurement of flow in blood vessels," in Proc. Solid-State Sensor and Actuator Workshop, Hilton Head, SC, 2004, pp. 290-293.
21. K. Takahata and Y. B. Gianchandani, "Micromachined intraluminal devices for active and passive electromagnetic measurements of flow," in Proc. IEEE Int. Conf. Micro Electro Mech. Systems (MEMS), 2005, pp. 863-866.
22. J. G. Webster, The Measurement, Instrumentation, and Sensors Handbook. Boca Raton, FL: CRC, 1999, vol. 28.6.
23. H. J. Yoon, S. Y. Kim, S. W. Lee, and S. S. Yang, "Fabrication of a micro electromagnetic flow sensor for micro flow rate measurement," in Proc. SPIE Symp. Smart Struc. Mat., 2000, pp. 264-271.
24. D. F. Young, "Some factors affecting pressure-flow relationships for arterial stenoses," in ASME Conf. Appl. Mech. Bioeng. Flu. Eng., 1983, pp. 87-90.
25. J. C. Conti, E. R. Strope, L. M. Goldenberg, and K. S. Price, "The durability of silicone versus latex mock arteries," in Proc. ISA Biomed. Sci. Instrum. Symp., 2001, vol. 37, pp. 305-312.
26. A. B. Fontaine, K. Koelling, S. D. Passos, J. Cearlock, R. Hoffman, and D. G. Spigos, "Polymeric surface modifications of tantalum stents," J. Endovasc. Surg., vol. 3, no. 3, pp. 276-283, 1996.
27. P. D. Harvey, Engineering Properties of Steel. Metals Park, OH: American Society for Metals, 1999.
28. MatWeb Automation Creations, Inc. [Online]. Available: http:// www.matweb.com
29. A. DeHennis and K. D. Wise, "An all-capacitive sensing chip for temperature, absolute pressure, and relative humidity," in IEEE Int. Conf. Solid-State Sens., Actuators and Microsyst.(Transducers), 2003, pp. 1860-1863.
30. Safety Level of Electromagnetic Radiation With Respect to Personnel IEEE, Amer. Nat. Standards Inst., 1974, ANSI C95.1-1974.
31. A. Kolin, "An alternating field induction flow meter of high sensitivity," Rev. Sci. Instrum., vol. 16, no. 5, pp. 109-116, 1945.
32. F. Hofmann, Fundamentals of Electromagnetic Flow Measurement, Third ed. Brochure: Krohne Inc., 2003.
33. B. H. Brown, R. H. Smallwood, D. C. Barber, P. V. Lawford, and D. R. Hose, Medical Physics and Biomedical Engineering. Bristol and Philadelphia: Inst. Physics, 1999, pp. 608-611.
34. C. Roberts, Blood Flow Measurement. Baltimore, MD: Williams and Wilkins, 1972.
35. A. Kolin, "A new approach to electromagnetic blood flow determination by means of catheter in an external magnetic field," Proc. Nat. Acad. Sci., vol. 65, no. 3, pp. 521-527, 1970.
36. C. J. Mills, "A catheter tip electromagnetic velocity probe," Phys. Med. Biol, vol. 11, no. 2, pp. 323-324, 1966.
37. A. Kolin, "Approaches to blood-flow measurement by means of electromagnetic catheter flow meters," IEEE Trans. Magn., vol. 6, pp. 308-314, Jun. 1970.
38. A. Kolin, "An electromagnetic catheter blood flow meter of minimal lateral dimensions," Proc. Nat. Acad. Sci., vol. 66, no. 1, pp. 53-56, May 1970.
39. J. P. Biscar, "Three-Electrode probe for catheter-type blood flowmeters," IEEE Trans. Biomed. Eng., vol. 20, pp. 62-63, Jan. 1973.
40. D. M. Clark and D. G. Wyatt, "An improved perivascular electromagnetic flowmeter," Med. Biolog. Eng., vol. 7, pp. 185-190, 1969.
41. L. L. Chu, K. Takahata, P. Selvaganapathy, Y. B. Gianchandani, and J. L. Shohet, "A micromachined kelvin probe with integrated actuator for microfluidic and solid-state applications," J. Microelectromech. Syst., vol. 7, pp. 691-698, Aug. 2005.
42. J. A. Shercliff, The Theory of Electromagnetic Flow-Measurement. Cambridge Univ. Press, U.K.: Cambridge, 1962.