Nanoindentation: Application to dental hard tissue investigations

Journal of Materials Research

Volumn 21, Issue 8, 2006, Pages 1893-1905

  Angker, L ^a   Swain, Michael V ^a,b  

^a UNIVERSITY OF OTAGO   (New Zealand)

^b UNIVERSITY OF SYDNEY   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

CRYSTAL MICROSTRUCTURE; ELASTIC MODULI; HARDNESS; HYDROXYAPATITE; INDENTATION; PATHOLOGY; TOOTH ENAMEL;

CEMENTUM; DENTAL CALCIFIED TISSUE; DENTIN; NANOINDENTATION;

TISSUE;

EID: 33749120071     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2006.0257     Document Type: Review

References (77)

1. L. Angker, C. Nockolds, M.V. Swain, and N. Kilpatrick: Correlating the mechanical properties to the mineral content of carious dentine: A comparative study using an ultra-micro indentation system (UMIS) and SEM-BSE signals. Arch. Oral Biol. 49, 369 (2004).
2. J. Arends, J. Ruben, and W.L. Jongebloed: Dentine caries in vivo: Combined scanning electron microscopic and microradiographic investigation. Caries Res. 23, 36 (1989).
3. J.B.D. Featherstone, J.M. ten Cate, M. Shariati, and J. Arends: Comparison of artificial caries-like lesions by quantitative microradiography and microhardness profile. Caries Res. 17, 385 (1983).
4. T. Kodaka, K. Debari, M. Yamada, and M. Kuroiwa: Correlation between microhardness and mineral content in sound human enamel. Caries Res. 26, 139 (1992).
5. J.J. Ten Bosch and B. Angmar-Mansson: A review of quantitative methods for studies of mineral content of intra-oral incipent carious lesions. J. Dent. Res. 70, 2 (1990).
6. L. Angker, M.V. Swain, and N. Kilpatrick: Characterising the micro-mechanical behaviour of the carious dentine of primary teeth using nano-indentation. J. Biomech. 38, 1535 (2005).
7. M.A. Darendeliler, O.P. Kharbanda, E.K. Chan, P. Srivicharnkul, T. Rex, M.V. Swain, A.S. Jones, and P. Petocz: Root resorption and its association with alterations in physical properties, mineral contents and resorption craters in human premolars following application of light and heavy controlled orthodontic forces. Orthod. Craniofac. Res. 7, 79 (2004).
8. E. Mahoney, F.S. Ismail, N. Kilpatrick, and M. Swain: Mechanical properties across hypomineralized/hypoplastic enamel of first permanent molar teeth. Eur. J. Oral Sci. 112, 497 (2004).
9. G.W. Marshall, S. Habelitz, R. Gallagher, M. Balooch, G. Balooch, and S.J. Marshall: Nanomechanical properties of hydrated carious human dentin. J. Dent. Res. 80, 1768 (2001).
10. S. Habelitz, S.J. Marshall, G.W. Marshall, Jr., and M. Balooch: Mechanical properties of human dental enamel on the nanometre scale. Arch. Oral Biol. 46, 173 (2001).
11. L. Angker, M.V. Swain, and N. Kilpatrick: Micro-mechanical characterisation of the properties of primary tooth dentine. J. Dent. 31, 261 (2003).
12. W. Grayson and G.W.J. Marshall: Dentine: Microstructure and characterization. Quintessence Int. 24, 606 (1993).
13. G.W. Marshall, Jr., S.J. Marshall, J.H. Kinney, and M. Balooch: The dentin substrate: Structure and properties related to bonding. J. Dent. 25, 441 (1997).
14. S. Malek, M.A. Darendeliler, and M.V. Swain: Physical properties of root cementum: Part I. A new method for 3-dimensional evaluation. Am. J. Orthod Dentofacial Orthop. 120, 198 (2001).
15. P. Srivicharnkul, O.P. Kharbanda, M.V. Swain, P. Petocz, and M.A. Darendeliler: Physical properties of root cementum: Part 3. Hardness and elastic modulus after application of light and heavy forces. Am. J. Orthod. Dentofacial Orthop. 127, 168 (2005).
16. B. Van Meerbeek, G. Willems, J.P. Celis, J.R. Roos, M. Braem, P. Lambrechts, and G. Vanherle: Assessment by nano-indentation of the hardness and elasticity of the resin-dentin bonding area. J. Dent. Res. 72, 1434 (1993).
17. N.E. Waters: Some mechanical and physical properties of teeth, in Mechanical Properties of Biological Materials, edited by J.F. Vincent and J.D. Curry (Cambridge University Press, Cambridge, UK, 1980), p. 99.
18. J. Mencik and M. Swain: Micro-indentation tests with pointed indenters. Mater. Forum 18, 277 (1994).
19. L. Angker, N. Nijhof, M.V. Swain, and N.M. Kilpatrick: Influence of hydration and mechanical characterization of carious primary dentine using an ultra-micro indentation system (UMIS). Eur. J. Oral Sci. 112, 231 (2004).
20. M. Balooch, I.C. Wu-Magidi, A. Balazs, A.S. Lundkvist, S.J. Marshall, G.W. Marshall, W.J. Siekhaus, and J.H. Kinney: Viscoelastic properties of demineralized human dentin measured in water with atomic force microscope (AFM)-based indentation. J. Biomed. Mater. Res. 40, 539 (1998).
21. W. Oliver and G. Pharr: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564 (1992).
22. T. Bell, J. Bendeli, J. Field, M. Swain, and E. Thwaite: The determination of surface plastic and elastic properties by ultra micro indentation system. Metrologia 28, 463 (1992).
23. J.S. Field and M.V. Swain: A simple predictive model for spherical indenter. J. Mater. Res. 8, 297 (1993).
24. M. Suganuma and M.V. Swain: Simple method and critical comparison of frame compliance and indenter area function for nanoindentation. J. Mater. Res. 19, 3484 (2004).
25. S. Poolthong: Determination of the mechanical properties of enamel, dentine and cementum by an ultra micro-identation system. Ph.D. Thesis. University of Sydney, Sydney, Australia (1998).
26. A. Nanci: Enamel: Composition, formation, and structure, in ten Cates Oral Histology Development, Structure, and Function, edited by A. Nanci (Mosby, St. Louis, MO, 2003) p. 145.
27. A. Boyde: Amelogenesis and the structure of enamel, in Scientific Foundations of Dentistry, edited by B. Cohen and I. Kramer (Heinenmann Medical Books, London, UK, 1976), p. 335.
28. P. Anderson and J.C. Elliott: Rates of mineral loss in human enamel during in vitro demineralization perpendicular and parallel to the natural surface. Caries Res. 34, 33 (2000).
29. J.L. Cuy, A.B. Mann, K.J. Livi, M.F. Teaford, and T.P. Weihs: Nanoindentation mapping of the mechanical properties of human molar tooth enamel. Arch. Oral Biol. 47, 281 (2002).
30. M.F. Ashby and D.R.H. Jones: Engineering Materials: An Introduction to Their Properties and Applications, 1st ed. (Pergamon Press, Oxford, UK, 1985) p. 25.
31. I. Spears: A three-dimensional finite element model of prismatic enamel: A re-appraisal of the data on the Young's modulus of enamel. J. Dent. Res, 76, 1690 (1997).
32. J. Ge, F.Z. Cui, X.M. Wang, and H.L. Feng: Property variations in the prism and the organic sheath within enamel by nanoindentation. Biomaterials 26, 3333 (2005).
33. P.R. Wilson and A.D. Beynon: Mineralization differences between human deciduous and permanent enamel measured by quantitative microradiography. Arch. Oral Biol. 34, 85 (1989).
34. I. Mejare and H. Stenlund: Caries rates for the mesial surface of the first permanent molar and the distal surface of the second primary molar from 6 to 12 years of age in Sweden. Caries Res. 34, 454 (2000).
35. F. Lippert, D.M. Parker, and K.D. Jandt: Susceptibility of deciduous and permanent enamel to dietary acid-induced erosion studied with atomic force microscopy nanoindentation. Eur. J. Oral Sci. 112, 61 (2004).
36. M.L. Hunter, N.X. West, J.A. Hughes, R.G. Newcombe, and M. Addy: Relative susceptibility of deciduous and permanent dental hard tissues to erosion by a low pH fruit drink in vitro. J. Dent. 28, 265 (2000).
37. E. Mahoney, A. Holt, M. Swain, and N. Kilpatrick: The hardness and modulus of elasticity of primary molar teeth: An ultra-micro-indentation study. J. Dent. 28, 589 (2000).
38. A. Lussi, N. Kohler, D. Zero, M. Schaffner, and B. Megert: A comparison of the erosive potential of different beverages in primary and permanent teeth using an in vitro model. Eur. J. Oral Sci. 108, 110 (2000).
39. I. Urabe, S. Nakajima, H. Sano, and J. Tagami: Physical properties of the dentin-enamel junction region. Am. J. Dent. 13, 129 (2000).
40. G. Balooch, G.W. Marshall, S.J. Marshall, O.L. Warren, S.A. Asif, and M. Balooch: Evaluation of a new modulus mapping technique to investigate microstructural features of human teeth. J. Biomech. 37, 1223 (2004).
41. G.W. Marshall, Jr., M. Balooch, R.R. Gallagher, S.A. Gansky, and S.J. Marshall: Mechanical properties of the dentinoenamel junction: AFM studies of nanohardness, elastic modulus, and fracture. J. Biomed. Mater. Res. 54, 87 (2001).
42. M.E. Barbour, D.M. Parker, G.C. Allen, and K.D. Jandt: Human enamel dissolution in citric acid as a function of pH in the range 2.30 < or = pH < or = 6.30: A nanoindentation study. Eur. J. Oral Sci. 111, 258 (2003).
43. M.E. Barbour, D.M. Parker, and K.D. Jandt: Enamel dissolution as a function of solution degree of saturation with respect to hydroxyapatite: A nanoindentation study. J. Colloid Interface Sci. 265, 9 (2003).
44. F. Lippert, D.M. Parker, and K.D. Jandt: In vitro demineralization/ remineralization cycles at human tooth enamel surfaces investigated by AFM and nanoindentation. J. Colloid Interface Sci. 280, 442 (2004).
45. E. Mahoney, J. Beattie, M. Swain, and N. Kilpatrick: Preliminary in vitro assessment of erosive potential using the ultra-micro-indentation system. Caries Res. 37, 218 (2003).
46. T. Attin, D. Vollmer, A. Wiegand, R. Attin, and H. Betke: Subsurface microhardness of enamel and dentin after different external bleaching procedures. Am. J. Dent. 18, 8 (2005).
47. R. de Oliveira, A.F. Paes Leme, and M. Giannini: Effect of a carbamide peroxide bleaching gel containing calcium or fluoride on human enamel surface microhardness. Braz. Dent. J. 16, 103 (2005).
48. R.H. Leonard, E.C. Teixeira, G.E. Garland, and A.V. Ritter: Effect on enamel microhardness of two consumer-available bleaching solutions when compared with a dentist-prescribed,home-applied bleaching solution and a control. J. Esthet. Restor. Dent. 17, 343 (2005).
49. I. Lewinstein, N. Fuhrer, N. Churaru, and H. Cardash: Effect of different peroxide bleaching regimens and subsequent fluoridation on the hardness of human enamel and dentin. J. Prosthet. Dent. 92, 337 (2004).
50. N. Unlu, F.K. Cobankara, C. Altinoz, and F. Ozer: Effect of home bleaching agents on the microhardness of human enamel and dentin. J. Oral Rehabil. 31, 57 (2004).
51. M.M. Watanabe, J.A. Rodrigues, G.M. Marchi, and G.M. Ambrosano: In vitro cariostatic effect of whitening toothpastes in human dental enamel-microhardness evaluation. Quintessence Int. 36, 467 (2005).
52. D. Yu, T. Sipos, M.M. Wu, T. Bilbault, M.C. Lynch, and C. Naleway: Effect of fluoride/essential oils-containing mouth rinse on the microhardness of demineralized bovine enamel. Am. J. Dent. 17, 216 (2004).
53. R.R. Seghi and I. Denry: Effects of external bleaching on indentation and abrasion characteristics of human enamel in vitro. J. Dent. Res. 71, 1340 (1992).
54. B.R. Hairul Nizam, C.T. Lim, H.K. Chng, and A.U. Yap: Nanoindentation study of human premolars subjected to bleaching agent. J. Biomech. 38, 2204 (2005).
55. G.C. Lopes, L. Bonissoni, L.N. Baratieri, L.C. Vieira, and S. Monteiro, Jr.: Effect of bleaching agents on the hardness and morphology of enamel. J. Esthet. Restor. Dent. 14, 24 (2002).
56. J.A. Rodrigues, G.M. Marchi, G.M. Ambrosano, H.O. Heymann, and L.A. Pimenta: Microhardness evaluation of in situ vital bleaching on human dental enamel using a novel study design. Dent. Mater. 21, 1059 (2005).
57. B. Jalevik and G.A. Klingberg: Dental treatment, dental fear and behaviour management problems in children with severe enamel hypomineralization of their permanent first molars. Int. J. Paediatr Dent. 12, 24 (2002).
58. J.H. Kinney, M. Balooeb, S.J. Marshall, G.W. Marshall, Jr., and T.P. Weihs: Atomic force microscope measurements of the hardness and elasticity of peritubular and intertubular human dentin. J. Biomech. Eng. 118, 133 (1996).
59. Y. Hosoya and G.W. Marshall: The nano-hardness and elastic modulus of sound deciduous canine dentin and young premolar dentin: Preliminary study. J. Mater. Sci.: Mater. Med. 16, 1 (2005).
60. S. Poolthong, M. Swain, T. Sumii, and T. Mori: Effect of tubule orientation on some mechanical properties of dentine. J. Dent. Res. 77, 847 (1998).
61. D. Pashley, A. Okabe, and P. Parham: The relationship between dentine microhardness and tubules density. Endo. Dent. Trauma 1, 176 (1985).
62. D.A. Sumikawa, G.W. Marshall, L. Gee, and S.J. Marshall: Microstructure of primary tooth dentine. Pediatr. Dent. 21, 439 (2000).
63. S. Poolthong, D. Low, M. Swain, T. Sumii, and T, Mori: Prediction of positional dependence of mechanical properties of dentine. J. Dent. Res. 77, 917 (1998).
64. S. Habelitz, G.W. Marshall, Jr., M. Balooch, and S.J. Marshall: Nanoindentation and storage of teeth. J. Biomech. 35, 995 (2002).
65. M.F. Burrow, U. Nopnakeepong, and S. Phrukkanon: A comparison of microtensile bond strengths of several dentin bonding systems to primary and permanent dentin. Dent. Mater. 18, 239 (2002).
66. I.H. el-Kalla and F. Garcia-Godoy: Bond strength and interfacial micromorphology of compomers in primary and permanent teeth. Int. J. Paediatr. Dent. 8, 103 (1998).
67. R. Hickel and J.M. Manhart: Glass-ionomer and comporners in pediatric dentistry, in Advances in Glass-Ionomer Cements, edited by C.L. Davidson and I.A. Mjor (Quintessence, Chicago, IL, 1999).
68. A. Hirayama: Experimental analytical electron microscopic studies on the quantitative analysis of elemental concentrations in biological thin specimens and its application to dental science. Shikwa Gakuho 90, 1019 (1990).
69. J. Arends, D. Inaba, and J. Ruben: Major topics in quantitative microradiography of enamel and dentin: R parameter, mineral distribution visualization, and hyper-remineralization. Adv. Dent. Res. 11, 403 (1997).
70. L. Angker, C. Nockolds, M.V. Swain, and N. Kilpatrick: Quantitative analysis of the mineral content of sound and carious primary dentine using BSE imaging. Arch. Oral Biol. 49, 99 (2004).
71. G.W. Marshall, N. Yucel, M. Balooch, and J.H. Kinney, S. Habelitz, S.J. Marshall: Sodium hypochlorite alterations on dentin and dentin collagen. Surf. Sci. 491, 444 (2001).
72. B. Kabler, M.V. Swain, and A. Moule: Fracture toughening mechanisms responsible for differences in work to fracture of hydrated and dehydrated dentine. J. Biomech. 36, 229 (2003).
73. M, Toledano, R. Osorio, E. Osorio, C. Prati, and R.M. Carvalho: Microhardness of acid-treated and resin infiltrated human dentine. J. Dent. 33, 349 (2005).
74. B. Berkovitz, G. Holland, and B. Moxham: Oral Anatomy, Histology and Embryology, 3rd ed. (Mosby, St. Louis, MO, 2002), p. 168.
75. S.P. Ho, H. Goodis, M. Balooch, G. Nonomura, S.J. Marshall, and G. Marshall: The effect of sample preparation technique on determination of structure and nanomechanical properties of human cementum hard tissue. Biomaterials 25, 4847 (2004).
76. S.P. Ho, M. Balooch, H.E. Goodis, G.W. Marshall, and S.J. Marshall: Ultrastructure and nanomechanical properties of cementum dentin junction. J. Biomed. Mater. Res. A 68, 343 (2004).
77. S. Malek, M.A. Darendeliler, T. Rex, O.P. Kharbanda, P. Srivicharnkul, M.V. Swain, and P. Petocz: Physical properties of root cementum: Part 2. Effect of different storage methods. Am. J. Orthod. Dentofacial Orthop. 124, 561 (2003).