Plastic dissipation in mixed-mode fatigue crack growth along plastically mismatched interfaces

International Journal of Fatigue

Volumn 28, Issue 12, 2006, Pages 1725-1738

  Daily, Jeremy S ^a   Klingbeil, Nathan W ^a  

^a Wright State University   (United States)

Author keywords

Bimaterial interfaces; Fatigue crack growth; Finite element analysis; Mixed mode; Plastic dissipation energy; Plastic mismatch

Indexed keywords

BRAZING; CRACK PROPAGATION; DUCTILITY; ENERGY DISSIPATION; INTERFACES (MATERIALS); PLASTICITY; SOLDERING; STRUCTURAL LOADS; WELDING;

BIMATERIAL INTERFACES; FATIGUE CRACK GROWTH; PLASTIC DISSIPATION ENERGY; PLASTIC MISMATCH;

FATIGUE OF MATERIALS;

EID: 33748440567     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2006.01.012     Document Type: Article

References (51)

1. Klingbeil N.W. A total dissipated energy theory of fatigue crack growth in ductile solids. Int J Fatigue 25 (2003) 117-128
2. Daily J.S., and Klingbeil N.W. Plastic dissipation in fatigue crack growth under mixedmode loading. Int J Fatigue 26 (2004) 727-738
3. Suo Z., and Hutchinson J.W. Interface crack between two elastic layers. Int J Fracture 43 (1990) 1-18
4. Hutchinson J.W., and Suo Z. Mixed mode cracking in layered materials. Adv Appl Mech 29 (1992) 63-191
5. Charalambides P.G., Lund J., Evans A.G., and McMeeking R.M. A test specimen for determining the fracture resistance of bimaterial interfaces. J Appl Mech 56 (1989) 77-82
6. Klingbeil N.W., and Beuth J.L. Interfacial fracture testing of deposited metal layers under four point bending. Eng Fract Mech 56 1 (1997) 113-126
7. Klingbeil N.W., and Beuth J.L. Continuous delamination of sprayed deposits via applied curvature. Int J Mech Sci 40 1 (1998) 1-13
8. Klingbeil N.W., and Beuth J.L. On the design of debond-resistant bimaterials part I: Free-edge singularity approach. Eng Fract Mech 66 (2000) 93-110
9. Klingbeil N.W., and Beuth J.L. On the design of debond-resistant bimaterials part II: A comparison of free-edge and interface crack approaches. Eng Fract Mech 66 (2000) 111-128
10. Anderson D.D., Jackson J.H., Epstein J.S., Ganti S., and Parks D.M. Constraint fracture in simulated weldments. Proc ASME Aerospace Div 52 (1996) 241-249
11. Mercier G.P. Fatigue and fracture mechanics: 33rd volume, ASTM STP 1417 (2002), ASTM International, West Conshohocken (PA) p. 328-59 [chapter. The effect of localized plasticity and crack tip constraint in undermatched welds]
12. Zhang H., Zhang Y., Li L., and Ma X. Influence of weld mismatching on fatigue crack growth behaviors of electron beam welded joints. Mater Sci Eng A 334 (2002) 141-146
13. Shih C.F. Cracks on bimaterial interfaces. Elasticity and plasticity aspects. Mater Sci Eng A 143 (1991) 77-90
14. Shih C.F., and Asaro R.J. Elastic-plastic and asymptotic fields of interface cracks. Int J Fract 42 (1990) 101-116
15. Woeltjen C., Shih C.F., and Suresh S. Cyclic near tip fields for fatigue cracks along metal-metal and metal-ceramic interfaces. Acta Metall Mater 48 8 (1993) 2317-2335
16. McNaney J.M., Cannon R.M., and Ritchie R.O. Fracture and fatigue-crack growth along aluminum-alumina interfaces. Acta Mater 44 12 (1996) 4713-4728
17. Jha M., and Charalambides P.G. A finite element analysis of fracture initiation in ductile/brittle periodically layered composites. Int J Fract 90 (1998) 299-323
18. Yao D., Zhang Z., and Shang J.K. An experimental technique for studying mixed-mode fatigue crack growth in solder joints. Trans ASME 118 (1996) 45-48
19. Yao D., and Shang J.K. Effect of load-mix on fatigue crack growth in 63Sn-37Pb solder joints. Trans ASME 119 (1997) 114-118
20. Xu X.X., Crocombe A.D., and Smith P.A. Mixed mode fatigue and fracture behaviour of joints bonded with either filled or filled and toughened adhesive. Int J Fatigue 17 4 (1995) 279-286
21. Nayeb-Hashami H., and Yang P. Mixed mode I/II fracture and fatigue crack growth along 63Sn-37Pb solder/brass interface. Int J Fatigue 23 (2001) S325-S335
22. Okazaki M., Okamoto M., and Harada Y. Interfacial fatigue crack propagation in Ni-based superalloy protective coatings. Fatigue Fract Eng Mater Struct 24 (2001) 885
23. Wahab M.M.A., Ashcroft I.A., Crocombe A.D., and Smith P.A. Numerical prediction of fatigue crack growth propagation lifetime in adhesively bonded structures. Int J Fatigue 24 (2002) 705-709
24. Lee H., and Kim Y. Interfacial crack tip constraints and J-integrals in plasticity mismatched bimaterials. Eng Fract Mech 68 8 (2001) 1013-1031
25. Lee H. Estimation of crack driving force on strength mismatched bi-material interfaces. Nucl Eng Des 212 (2002) 155-164
26. Francis M., and Rahman S. Probabalistic analysis of weld cracks in center-cracked tension specimens. Comput Struct 76 (2000) 483-506
27. Rice J.R. Mechanics of crack tip deformation and extension by fatigue. Fatigue Crack Propag, ASTM STP 415 (1967) 247-311
28. Raju K.N. An energy balance criterion for crack growth under fatigue loading from considerations of energy of plastic deformation. Int J Fract Mech 8 1 (1972) 1-14
29. Weertman J. Theory of fatigue crack growth based on a BCS crack theory with work hardening. Int J Fract 9 2 (1973) 125-131
30. Mura T., and Lin C.T. Theory of fatigue crack growth for work hardening materials. Int J Fract 10 (1974) 284-287
31. Bodner S.R., Davidson D.L., and Lankford J. A description of fatigue crack growth in terms of plastic work. Eng Fract Mech 17 2 (1983) 189-191
32. Moyer Jr. E.T., and Sih G.C. Fatigue analysis of an edge cracked specimen: hysteresis strain energy density. Eng Fract Mech 19 2 (1984) 643-652
33. Kujawski D., and Ellyin F. A fatigue crack propagation model. Eng Fract Mech 20 (1984) 695-704
34. Ellyin F. Crack growth rate under cyclic loading and effect of different singularity fields. Eng Fract Mech 25 (1986) 463-473
35. Sih G.C., and Jeong D.Y. Fatigue load sequence effect ranked by critical available energy density. Theoret Appl Fract Mech 14 (1990) 141-151
36. Chow C.L., and Lu T.J. Cyclic J-integral in relation to fatigue crack initiation and propagation. Eng Fract Mech 39 1 (1991) 1-20
37. Wang W., and Hsu C.-T.T. Fatigue crack growth rate of metal by plastic energy damage accumulation theory. J Eng Mech 120 4 (1994) 776-795
38. Skelton R.P., Vilhelmsne T., and Webster G.A. Energy criteria and cumulative damage during fatigue crack growth. Int J Fatigue 20 9 (1998) 641-649
39. Liaw P.K., Kwun S.I., and Fine M.E. Plastic work of fatigue propagation in steels and aluminum alloys. Metall Trans A 12 (1981) 49-55
40. Fine M.E., and Davidson D.L. Quantitative measurement of energy associated with a moving fatigue crack. Fatigue Mech:. Adv Quant Meas Phys Damage, ASTM STP 811 (1983) 350-370
41. Ranaganathan N, Petit J, de Fouquet J. Energy required for fatigue crack propagation. In: Proceedings of the 7th international conference on strength of metals and alloys, Montreal, Canada; 1986. p. 1267-72.
42. Ranganathan N., Jendoubi N., Benguediab M., and Petit J. Effect of R-ratio and ΔK level on the hysteretic energy dissipated during fatigue crack propagation. Scr Metall 21 (1987) 1045-1049
43. Birol Y. What happens to the energy input during fatigue crack propagation. Mater Sci Eng A 104 (1988) 117-124
44. Jendoubi K., Ranganathan N., and Merah N. Effects of thickness on elasto-plastic deformation and hysteretic energy dissipated at crack tip. J Testing Evaluation 19 3 (1991) 201-209
45. Stuwe H.P., and Pippan R. On the energy balance of fatigue crack growth. Comput Struct 44 1-2 (1992) 13-17
46. Ranganathan N., and Desforges J.R. Equivalent constant amplitude concepts examined under fatigue crack propagation by block loading. Fatigue Fract Eng Mater Struct 19 8 (1996) 997-1008
47. Rajic N., Lam Y.C., and Wong A.K. Evolved heat as a fatigue characterization parameter. Mater Sci Forum 210-213 (1996) 463-470
48. Ranganathan N. Analysis of fatigue crack growth in terms of crack closure and energy. Adv Fatigue Crack Closure Meas Anal: Second Volume, ASTM STP 1343 (1999) 14-38
49. Qian J., and Fatemi A. Mixed mode fatigue crack growth: a literature survey. Eng Fract Mech 55 6 (1996) 969-990
50. Davidson D.L. The energetics of fracture. In: Morris E. (Ed). Fine symposium (1991), The Minerals, Metals and Materials Society 355-362
51. Ellyin F., and Wu J. Elastic-plastic analysis of a stationary crack under cyclic loading and effect of overload. Int J Fract 56 (1992) 189-208