The effects of implant temperature on lubricant protein precipitation and polyethylene wear in joint simulation studies

Journal of ASTM International

Volumn 3, Issue 6, 2006, Pages

  Liao, Yen Shuo ^a   Hanes, Mark ^a  

^a Johnson Johnson Company   (United States)

Author keywords

Cobalt chromium alloy; Frictional heating; Lubrication; Protein precipitation; Temperature; UHMWPE; Wear debris; Wear simulation; Zirconia

Indexed keywords

CROSSLINKING; JOINT PROSTHESES; LUBRICANTS; POLYETHYLENES; PRECIPITATION (CHEMICAL); PROTEINS; WEAR OF MATERIALS; ZIRCONIA;

COBALT-CHROMIUM ALLOY; FRICTIONAL HEATING; PROTEIN PRECIPITATION; WEAR DEBRIS; WEAR SIMULATION;

THERMAL EFFECTS;

EID: 33746865990     PISSN: None     EISSN: 1546962X     Source Type: Journal    
DOI: 10.1520/JAI14178     Document Type: Article

References (20)

1. Simon, S. R., and Radin, E. L., "Lubrication and Wear of the Charnley, Charnley-Muller, and McKee-Farrar Prostheses with Special Regard to their Clinical Behavior," Proceedings of the First Open Scientific Meeting of the Hip Society: The Hip, St. Louis, 1973.
2. Dowson, D., and Harding, R. T., "The Wear Characteristics of Ultrahigh Molecular Weight Polyethylene Against a High Density Alumina Ceramic Under Wet (Distilled Water) and Dry Conditions," Wear, Vol. 75, 1982, pp. 313-331.
3. Kumar, P. et al., "Low Wear Rate of UHMWPE Against Zirconia Ceramic (Y-PSZ) in comparison to Alumina Ceramic and SUS 316L Alloy," J. Biorned. Mater. Res., 25, 1991, pp. 813-828.
4. Mejia, L. C., and Brierley, T. J., "A Hip Wear Simulator for the Evaluation of Biomaterials in Hip Arthroplasty Components," Biomed. Mater. Eng., Vol. 4, No. 4, 1994, pp. 259-271.
5. McKellop, H. A. et al., "The Origin of Submicron Polyethylene Wear Debris in Total Hip Arthro-plasty," Clin. Orthop., Vol. 311, 1.995, pp. 3-20.
6. Bragdon, C. R., O'Connor, D. O., Lowenstein, J. D., Jasty, M., and Syniuta, W. D., "The Importance of Multidirectional Motion on the Wear of Polyethylene," Proceedings, Institution of Mechanical Engineers, Vol. 210, No. 3, 1996, pp. 157-165.
7. Saikko, V. O., "A Three-Axis Hip Joint Simulator for Wear and Friction Studies on Total Hip Prostheses," Proceedings, Institution of Mechanical Engineers, Vol. 210, No. 3, 1996, pp. 175-185.
8. Bigsby, R. J. A., Hardaker, C. S., and Fisher, J., "Wear of Ultra-High Molecular Weight Polyethylene Acetabular Cups in a Physiological Hip Joint Simulator in the Anatomical Position Using Bovine Serum as a Lubricant," Proceedings, Institution of Mechanical Engineers, Vol. 211, 1997, pp. 265-269.
9. Wang, A., Polineni, V. K., Essner, A., Stark, C., and Dumbleton, J. H., "Effect of Head/Cup Clearance on the Wear of UHMWPE in Total Hip Replacement," 24th Annual Meeting on the Society for Biomaterials, San Diego, CA, April 22-26, (1998).
10. Liao, Y.-S., Benya, P., and McKellop, H., "Effect of Protein Lubrication on the Wear Properties of Materials for Prosthetic Joints," J. Biomed. Mater. Res., Vol. 48, No. 4, 1999, pp. 465-473.
11. Barbour, P. S. M., Stone, M. H., and Fisher, J., "A Hip Joint Simulator Study Using New and Physiologically Scratched Femoral Heads with Ultra-high Molecular Weight Polyethylene Acetabular Cups," Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Vol. 214, No. 6, 2000, pp. 569-576.
12. McKellop, H., Clarke, I. C., Markolf, K., and Amstutz, H., "Wear Characteristics of UHMW Polyethylene: A Method for Accurately Measuring Extremely Low Wear Rates," J. Biomed. Mater. Res., Vol. 12, 1978, pp. 895-927.
13. Roberts, B. J., Unsworth, A., and Mian, N., "Modes of Lubrication in Human Hip Joints," Ann. Rheum. Dis., Vol. 41, 1982, pp. 217-224.
14. Good, V. D., Clarke, I. C., and Anissian, L., "Water and Bovine-Serum Lubrication Compared in Simulator PTFE/CoCr Wear Model," J. Biomed. Mater. Res. Vol. 33, 1996, pp. 275-283.
15. Saikko, V., and Ahlroos, T., "Phospholipids as Boundary Lubricants in Wear Tests of Prosthetic Joint Materials," The 7th Nodic Symposium on Tribology [Preprints from the 7th Nordic Symposium on Tribology, NORTRIB" 96], Bergen, Norway, June 16th-19th, 1996.
16. Wang, A., Polineni, V. K., Essner, A., Stark, C., and Dumbleton, J. H., "Role of Proteins and Hyaluronic Acid in the Lubrication and Wear of UHMWPE Aetabular Cups," 24th Annual Meeting of the Society for Biomaterials, San Diego, April 22-26, 1998.
17. ISO: 14242-1: Implants for Surgery - Wear of Total Hip Joint Prostheses - Part 1: Loading and Displacement Parameters for Wear-Testing Machines and Corresponding Environmental Conditions for Test, 2002.
18. Lu, Z., and McKellop, H., "Frictional Heating of Bearing Materials Tested in a Hip Joint Wear Simulator," Proceedings, Institution of Mechanical Engineers, Vol. 211, 1997, pp. 101-108.
19. Liao, Y.-S., McKellop, H., Lu, Z., Campbell, P., and Benya, P., "The Effect of Frictional Heating and Forced Cooling on the Serum Lubricant and Wear of UHMW Polyethylene Cups Against Cobalt-Chromium," Vol. 24, No. 18, 2003, pp. 3047-3059.
20. Liao, Y.-S., Hanes, M., Fryinan, J. C., and DiSilvestro, M., "Phase Stability of Zirconia and Alumina/Zirconia Composite Heads Against UHMWPE Liners in a Temperature-Controlled Hip Simulation Study," Bioceramics, New Orleans, LA, December 8-11, 2004.