A smart indoor air quality sensor network

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 6174 II, Issue , 2006, Pages

  Wen, Jin ^a  

^a Drexel University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AGENT CONTAMINATION; CHEMICAL AND BIOLOGICAL WARFARE (CBW); INDOOR AIR QUALITY (IAQ); SENSOR NETWORKS;

AEROSOLS; CONTAMINATION; ECONOMIC AND SOCIAL EFFECTS; HEALTH CARE; MILITARY OPERATIONS; POLLUTION; SYSTEMS ANALYSIS; VENTILATION;

SENSORS;

EID: 33745958042     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.661257     Document Type: Conference Paper

References (61)

1. EPA, 1995, The Inside Story: A Guide to Inside Air Quality. EPA Document # 402-K-93-007. Washington, D. C.: U.S. Environmental Protection Agency.
2. EPA, 2000, Why Is the Environment Indoors Important to Us? Indoor Environment Division, U.S. Environmental Protection Agency, Washington, D. C.
3. Zhang, Y. Indoor Air Quality Engineering, CRC Press LLC, 2004, Boca Raton, Florida.
4. ASHRAE. 2001. ASHRAE Handbook - Fundamentals, ASHRAE, Atlanta, GA.
5. Grimsrud, D. T. and Hadlich, D. E. 1999. "Residential Pollutants and Ventilation Strategies: Volatile Organic Compounds and Radon," ASHRAE Transactions.
6. ASHRAE. 2004. Ventilation for Acceptable Indoor Air Quality, ASHRAE Standard 62.1, ASHRAE, Atlanta, GA.
7. DOE, 2002 Buildings Energy Data Book, U.S. Department of Energy, 2003.
8. Curtiss, P.S., Kreider, J.F., 1992. "Laboratory tests of the nonlinearity of outdoor air percentage as a function of damper position and induced inlet pressure," ASHRAE Transactions, v 98, n pt 1, 196-202.
9. Schroeder, C. C., Krarti, M., and Brandemuehl, M. J., 2000. "Error Analysis of Measurement and Control Techniques of Outside Air Intake Rates in VAV Systems," ASHRAE Transactions, v 106, pt 2, 26-38.
10. NRCa, 2004, Sensor Systems for Biological Agent Attacks: Protecting Buildings and Military Bases, National Research Council of the National Academies, National Academies Press, Washington, D.C.
11. NRCb, 2004, Naval Forces' Defense Capabilities Against Chemical and Biological Warfare Threats, Division on Engineering and Physical Sciences, National Research Council of the National Academies, National Academies Press, Washington, D.C. http://www.nap.edu/catalog/11034.html
12. Zampolli, S., I. Elmi, F. Ahmed, M. Passini, G. Cardinali, S. Micoletti, L. Dori, 2004. "An Electronic Nose Based on Solid State Sensor Arrays for Low-Cost Indoor Air Quality Monitoring Applications," Sensors and Actuators, B 101, 39-46.
13. Zhou, J., P. Li, S. Zhang, Y. Long, F. Zhou, Y. Huang, P. Yang, M. Bao, 2003, "Zeolite-Modified Microcantilever Gas Sensor for Indoor Air Quality Control," Sensors and Actuators, B 94, 337-342.
14. Carrano, J., 2004, Chemical and Biological Sensor Standards Study, MicroSystems Technology Office, Defense Advanced Research Projects Agency. http://www.darpa.mil/mto/publications/briefmgs/CBS3_final_report.pdf
15. Wang S. and Xu, X., "Optimal and Robust Control of Outdoor Ventilation Airflow rate for Improving Energy Efficiency and IAQ," Building and Environment, 39, pp. 763-773, 2004.
16. Krarti, M, Al-Alawi, M. "Analysis of the impact of CO2-based demand-controlled ventilation strategies on energy consumption," ASHRAE Transactions, 110(1), pp. 274-286, 2004.
17. Budaiwi, I. M., and Al-Homoud, M. S., "Effect of Ventilation Strategies on Air Contaminant Concentrations and Energy Consumption in Buildings," International Journal of Energy Research, 25, pp. 1073-1089, 2001.
18. Brandemuehl, M. J., and Braun, J. E., "The Impact of Demand-Controlled and Economizer Ventilation Strategies on Energy Use in Buildings," ASHRAE Transactions, 105(2), pp. 39-44, 1999.
19. Fisk, W. J., and Almeida, A. T. D., "Sensor-Based Demand-Controlled Ventilation: A Review," Energy and Buildings, 29, 35-45, 1998.
20. Chao, C. Y. H., and Hu, J. S., "Development of a Dual-Mode Demand Control Ventilation Strategy for Indoor Air Quality Control and Energy Saving," Building and Environment, 39, pp. 385-397, 2004.
21. IEA, Demand-Controlled Ventilating Systems: State of the Art Review, International Energy Agency, Swedish Council for Building Research, Stockholm, 1990.
22. IEA, Demand-Controlled Ventilating Systems: Case Studies, International Energy Agency, Swedish Council for Building Research, Stockholm, 1993.
23. Pavlovas, V., "Demand Controlled Ventilation A Case Study for Existing Swedish Multifamily Buildings," Energy and Buildings, 36, pp. 1029-1034, 2004.
24. Faulkner, D., Fisk, W. J., and Walton, J. T., "Energy Savings in Cleanrooms from demand-controlled filtration," Journal of the Institute of Environmental Science, 39 (2), pp. 21-27, 1996.
25. Chiang, C. M., and Lai, C. M., "A Study on the Comprehensive Indicator of Indoor Environment Assessment for Occupants' Health in Taiwan," Building and Environment, 37, pp. 387-392, 2002.
26. Satty T. L., and Erdener, E. A., "A New Approach to Performance Measurement the Analytic Hierarchy Process," Design Methods and Theories, 13(2), pp. 62-68, 1979.
27. Kolokotsa, D., Tsiavos, D., Stavrakakis, G. S., Kalaitzakis, K., and Antonidakis, E., (2001), "Advanced Fuzzy Logic Controllers Design and Evaluation for Buildings' Occupants Thermal-Visual Comfort and Indoor Air Quality Satisfaction," Energy and Buildings, 33, pp. 531-543.
28. Kolokotsa, D., Stavrakakis, G. S., Kalaitzakis, K., and Agoris, D., (2002), "Genetic Algorithms Optimized Fuzzy Controller for the Indoor Environmental Management in Buildings Implemented Using PLC and Local Operating Networks," Engineering Applications of Artificial Intelligence, 15, 417-428.
29. Shepherd, A. B., and Batty, W. J., (2003), "Fuzzy Control Strategies to Provide Cost and Energy Efficient High Quality Indoor Environments in Buildings with High Occupant Densities," Building Service Engineer Research Technology, 24 (1), pp. 35-45.
30. Kolokotsa, D., (2003), "Comparison of the Performance of Fuzzy Controllers for the Management of the Indoor Environment," Building and Environment, 38, pp. 1439-1450.
31. He, M., Cai, W. and Li, S., (2005), "Multiple Fuzzy Model-Based Temperature Predictive Control for HVAC Systems," Information Science, 169, pp. 155-174.
32. Arvelo, J., A. Brandt, R. P. Roger, and A. Saksena, 2002, "An Enhanced Multizone Model and Its Application to Optimum Placement of CBW Sensors," ASHRAE Transactions, 108(2), 818-825.
33. NIST. 2003. CONTAM Description, National Institute of Standards and Technology, Gaithersburg, MD. http://www.bfrl.nist.gov/IAQanalysis/CONTAMWdesc. htm
34. Zhai, Z., J. Srebric, and Q. Chen. 2003. "Application of CFD to Predict and Control Chemical and Biological Agent Dispersion in Buildings," International Journal of Ventilation, 2(3). 251-264.
35. Lee, M. H., and Deininger, R. A., 1992, "Optimal Locations of Monitoring Stations in Water Distribution System," Journal of Environmental Engineering, 118(1), 4-16.
36. Kumar, a., Kansal, M. L., and Arora, G., 1997, "Identification of Monitoring Stations in Water Distribution System," Journal of Environmental Engineering, 123(8), 746-752.
37. Kessler, A., Ostfeld, A., and Sinai, G., 1998. "Detecting accidental contaminations in municipal water networks." Journal of Water Resource Plan. Manage., 124(4), 192-198.
38. Harmant, P., Nace, A., Kiene, L., and Fotoohi, F., 1999. "Optimal supervision of drinking water distribution network." Proc., 26th Annual Water Resources Planning and Management Conf. '99 - Preparing for the 21st Century, Chapter 8F180, (CD-ROM), ASCE, Reston, Va.
39. Al-Zahrani, M. A., and Moied, K. 2001. "Locating optimum water quality monitoring stations in water distribution system." Bridging the gap: Meeting the world's water and environmental resources challenges, State of the Practice-Proc., World Water and Environmental Resources Congress, ASCE, Reston, Va.
40. Woo, H.-M., Yoon, J.-H., and Choi, D.-Y. 2001. "Optimal monitoring sites based on water quality and quantity in water distribution systems." Bridging the gap: Meeting the world's water and environmental resources challenges, State of the Practice-Proc., World Water and Environmental Resources Congress, ASCE, Reston, Va.
41. Ostfeld, A. and E. Salomons. 2004. "Optimal Layout of Early Warning Detection Stations for Water Distribution Systems Securit," Journal of Water Resources Planning and Management, 130 (5), 377-385.
42. Watson, J., H. J. Greenberg, and W. E. Hart, 2004. "A Multiple-Objective Analysis of Sensor Placement Optimization in Water Networks," Proc. World Water and Environment Resources Conf. ASCE.
43. Berry, J. W., L. Fleischer, W. E. Hart, C. A. Phillips, and J Watson. 2005. "Sensor Placement in Municipal Water Networks," Journal of Water Resources Planning and Management, 131 (3), 237-243
44. J. M. Leavitt, F. Pooler, and R. C. Wanta. 1963. "Design and interim meteorological evaluation of a community network for meteorological and air quality measurements," J. Air Pollution, 7, 211-215.
45. K. E. Noll and S. Mitsutomi. 1983. "Design methodology for optimum dosage air monitoring site selection," Atmos. Environ., 17, 2583-2590.
46. Caselton, W. F., and J. V. Zidek. 1984. "Optimal Monitoring Networks Design," Statistics and Probaility Letters, 2, 223-227
47. Perez-Abreu, V., and J. E. Rodriguez. 1996. "Index of Effectiveness of a Multivariate Environmental Monitoring Network," Environ-metrics, 7, 489-501.
48. Kubrusly, C. S., and H. Malebranche. 1985. "Sensors and Controllers Location in Distributed Systems - A Survey," Automatica, 21(2), 117-128.
49. Worden, K., and A. P. Burrows. 2001. "Optimal Sensor Placement for Fault Detection," Engieering Structures, 23, 885-901.
50. Ucinski, D. 2005. Optimal Measurement Methods for Distributed Parameter System Identification, CRC Press, Boca Raton, FL.
51. Bagajewicz, M., and M. Sanchez. 1999. "Design and Upgrade of Nonredundant and Redundant Linear Sensor Networks," AICHE Journal Process System Engineering, 45(9), 1927-1938.
52. Bagajewicz, M., and M. Sanchez. 2000. "Cost-Optimal Design of Reliable Sensor Networks," Computers and Chemical Engineering, 23, 1757-1762.
53. Chmielewski, D. J., T. Palmer, and V. Manousiouthakis. 2002. "On the Theory of Optimal Sensor Placement," AICHE Journal, 48 (5), 1001-1012.
54. Bhushan, M., and R. Rengaswamy. 2002. "Comprehensive Design of a Sensor Network for Chemical Plants Based on Various Diagnosability and Reliability Criteria. 1. Framework," Ind. Eng. Chem. Res., 41, 1826-1839.
55. Benqlilou, C., M. Graells, E. Musulin, and L. Puigjaner. 2004. "Design and Retrofit of Reliable Sensor Networks," Ind. Eng. Chem. Res., 43, 8026-8036.
56. K. Miettinen. 1999. Nonlinear MultiObjective Optimization. Kluwer International Series, Boston, MA.
57. Sohn, C. W., A. Solberg, and T. Gonsoulin. 2004. Analysis of Numerical Models for Dispersion of Chemical/Biological Agents in Complex Building Environments, Construction Engineering Research Laboratory, ERDC/CERL TR-04-25, US Army Corps of Engineers, Washington, DC.
58. Gao, Y. and Q. Chen. 2003. "Coupling of a multi-zone airflow analysis program with a computational fluid dynamics program for indoor air quality studies," Proceedings of the 2003 4th International Symposium on Heating, Ventilating and Air Conditioning, 236-242
59. LBNL, 2003, COMIS Overview, Airflow and Pollutant Transport Group, Lawrence Berkeley National Laboratory, Berkeley, CA. http://epb1.lbl.gov/comis/
60. Z. Ren, 2002, Enhanced Modeling of Indoor Air Flows, Temperatures, Pollutant Emission and Dispersion by Nesting Sub-Zones within a Multizone Model, Ph.D. Thesis, School of Computer Science, The Queen's University of Belfast, Belfast, Northern Ireland, UIC. http://questor.qub.ac.uk/webpages/whatwedo/ researchgroups/environmentalmodelling/ia/qcair6.html
61. Wen, J. "Sensor system design for building indoor air protection," Proceedings for SPIE Intelligent Systems in Design and Manufacturing VI, SPIE 5999-15, Boston, MA, 2005