Non-isothermal grain growth in metals and alloys

Materials Science and Technology

Volumn 22, Issue 3, 2006, Pages 253-278

  Mishra, S ^a   DebRoy, T ^a  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

Annealing; Casting; Cellular automaton; Grain growth; Monte Carlo; Phase field; Rolling; Welding

Indexed keywords

ANNEALING; CASTING; ISOTHERMS; MONTE CARLO METHODS; NUMERICAL METHODS; ROLLING; SPATIAL VARIABLES CONTROL; THERMAL EFFECTS; WELDING;

CELLULAR AUTOMATON; MATERIALS PROCESSING; NON-ISOTHERMAL SYSTEMS; PHASE FIELD;

GRAIN GROWTH;

EID: 33745450744     PISSN: 02670836     EISSN: None     Source Type: Journal    
DOI: 10.1179/174328406X84094     Document Type: Review

References (147)

1. P. A. Beck: Philos. Mag. Suppl., 1954, 3, 245.
2. H. V. Atkinson: Acta Metall., 1988, 36, 469.
3. V. Novikov: 'Grain growth and control of microstructure and texture in polycrystalline materials', 1997, Boca Raton, FL, CRC Press.
4. T. Gladman: 'Grain size control'; 2004, London, Maney Publishing.
5. D. A. Porter and K. E. Easterling: 'Phase transformations in metals and alloys'; 1981, New York, van Nostrand Reinhold Company.
6. P. Feltham: Acta Metall., 1957, 5, 97.
7. P. A. Beck, J. C. Kremer, L. J. Demer and M. L. Holzworth: Trans. AIME, 1948, 175, 372.
8. J. E. Burke and D. Turnbull: Prog. Met. Phys., 1952, 3, 220.
9. M. Hillert: Acta Metall., 1965, 13, 227.
10. D. J. Srolovitz, M. P. Anderson, P. S. Sahni and G. S. Grest: Acta, Metall., 1984, 32, 793.
11. Y. Saito and M. Enomoto: ISIJ Int., 1992, 32, 267.
12. S. Sista and T. DebRoy: Metall. Mater. Trans. B, 2001, B32, 1195.
13. J. Gao and R. G. Thompson: Acta Mater., 1996, 44, 4565.
14. P. Gordon and T. A. El-Bassyouni: Trans. Metall. Soc. AIME, 1965, 233, 391.
15. H. Hu: Can. Metall. Q., 1974, 13, 275.
16. E. L. Holmes and W. C. Winegard: Acta Metall., 1959, 7, 411.
17. J. P. Drolet and A. Galibois: Acta Metall., 1968, 16, 1387.
18. F. J. Gil and J. A. Planell: Mater. Sci. Eng. A, 2000, A283, 17.
19. F. X. Gil, D. Rodriguez and J. A. Planell: Scr. Metall. Maler., 1995, 33, 1361.
20. F. J. Gil and J. A. Planell: J. Mater. Sci. Lett., 2000, 19, 2023.
21. G. F. Boiling and W. C. Winegard: Acta Metall., 1958, 6, 283.
22. C. S. Smith: 'Metal interfaces', 65; 1952, Materials Park, OH, ASM International.
23. J. von Neumann: 'Metal interfaces', 108; 1952, Materials Park, OH, ASM International.
24. N. P. Louat: Acta Metall., 1974, 22, 721.
25. M. P. Anderson, D. J. Srolovitz, G. S. Grest and P. S. Sahni: Acta Metall, 1984, 32, 783.
26. J. E. Morral and M. F. Ashby: Acta Metall., 1974, 22, 567.
27. N. F. Rhines and K. R. Craig: Metall. Trans. A, 1974, A5, 413.
28. R. D. Doherty: Metall. Trans. A, 1975, A6, 588.
29. O. Hunderi: Acta Metall., 1979, 27, 167.
30. V. Y. Novikov: Acta Metall., 1978, 26, 1739.
31. F. H. Rhines and B. R. Patterson: Metall. Trans. A, 1982, A13, 985.
32. O. Hunderi, N. Ryum and H. Westengen: Acta Metall., 1979, 27, 161.
33. E. A. Ceppi and O. B. Nasello: Scr. Metall., 1984, 18, 1221.
34. V. E. Fradkov, M. E. Glicksman, M. Palmer and K. Rajan: Acta Metall. Mater., 1994, 42, 2719.
35. D. Fan and L. Q. Chen: Acta Mater., 1997, 45, 611.
36. S. M. Allen and J. W. Cahn: Acta Metall., 1979, 27, 1085.
37. R. B. Potts: Proc. Camb. Philol. Soc., 1952, 48, 106.
38. E. A. Holm, J. A. Glazier, D. J. Srolovitz and G. S. Grest: Phys. Rev. A, 1991, A43, 2662.
39. G. S. Grest, M. P. Anderson and D. J. Srolovitz: Phys. Rev. B, 1988, B38, 4752.
40. M. P. Anderson, G. S. Grest and D. J. Srolovitz: Philos. Mag. B, 1989, B59, 293.
41. S. Ling and M. P. Anderson: JOM, 1992, 44, 30.
42. M. F. Ashby and K. E. Easterling: Acta Metall., 1982, 30, 1969.
43. J. W. Martin and R. D. Doherty: 'Stability of microstructure in metallic systems', 228; 1976, New York, Cambridge University Press.
44. R. A. Vandermeer and H. Hu: Acta Metall. Mater., 1994, 42, 3071.
45. S. S. Sahay, C. P. Malhotra and A. M. Kolkhede: Acta Mater., 2003, 51, 339.
46. S. A. David and T. DebRoy: Science, 1992, 257, 497.
47. T. DebRoy and S. A. David: Rev. Mod. Phys., 1995, 67, 85.
48. M. Vandyoussefi and A. L. Greer: Acta Mater., 2002, 50, 1693.
49. P. J. Alberry, B. Chew and W. K. C. Jones: Met. Technol., 1977, 4, 317.
50. P. J. Alberry and W. K. C. Jones: Met. Technol., 1977, 4, 557.
51. K. Easterling: 'Introduction to the physical metallurgy of welding'; 1983, London, UK, Butterworths.
52. S. Mishra and T. DebRoy: Acta Mater., 2004, 52, 1183.
53. T. George and J. J. Irani: J. Aust. Inst. Met., 1968, 13, 94.
54. S. Matsuda and N. Okumura: Trans. ISIJ, 1978, 18, 198.
55. S. Mishra and T. DebRoy: J. Phys. D: Appl. Phys., 2004, 37, 2191.
56. C. A. Schuh and D. C. Dunand: Acta Mater., 2002, 50, 1349.
57. H. Geng, S. He and T. Lei: Metall. Mater. Trans. A, 1997, A28, 1809.
58. R. S. Yang: Heat Treat. Met., 1993, 1, 32.
59. D. V. Andreev, V. N. Bespalov, A. Y. Biryukov and E. A. Krasikov: J. Nucl. Mater., 1999, 274, 329.
60. E. A. Smolnikov and L. M. Orestova: Met. Sci. Heat Treat., 1982, 24, 519.
61. S. S. Kim and D. N. Yoon: Acta Metall., 1983, 31, 1151.
62. B. Chalmers: 'Principles of solidification', 1964, New York, John Wiley.
63. C.-A. Gandin and M. Rappaz: Acta Metall. Mater., 1994, 42, 2233.
64. C. Y. Wang and C. Beckermann: Met. Mater. Trans. A, 1994, A25, 1081.
65. S. G. R. Brown and J. A. Spittle: Mater. Sci. Technol., 1989, 5, 362.
66. M. Militzer, A. Giumelli, E. B. Hawbolt and T. R. Meadowcroft: Metall. Mater. Trans. A, 1996, A27, 3399.
67. M. J. Leap and E. L. Brown: Mater. Sci. Technol., 2002, 18, 945.
68. M. Dubois, A. Moreau, M. Militzer and J. F. Bussiere: Scr. Mater., 1998, 39, 735.
69. M. Dubois, M. Militzer, A. Moreau and J. F. Bussiere: Scr. Mater., 2000, 42, 867.
70. S. Kruger, A. Moreau and G. Lamouche: Proc. 1st Joint Int. Conf. on 'Recrystallization and grain growth', (ed. G. Gottstein and D. A. Molodov), 583; 2001, Berlin, Springer.
71. C. B. Scruby and L. E. Drain: 'Laser ultrasonics: techniques and applications'; 1990, Bristol, A. Hilger.
72. O. N. Senkov, M. Dubois and J. J. Jonas: Metall. Mater. Trans. A, 1996, A27, 3963.
73. F. G. Wilson and T. Gladman: Int. Mater. Rev., 1988, 33, 221.
74. H. F. Poulsen, X. Fu, E. Knudsen, E. M. Lauridsen, L. Margulies and S. Schmidt: Mater. Sci. Forum, 2004, 467-470, 1363.
75. H. F. Poulsen, E. M. Lauridsen, S. Schmidt, L. Margulies and J. H. Driver: Acta Mater., 2003, 51, 2517.
76. S. Mishra: 'Grain growth in the heat-affected zone of Ti-6A1-4V alloy welds: measurements and MC simulations', Masters dissertation, The Pennsylvania State University, PA, USA, 2003.
77. R. D. Doherty: J. Mater. Educ., 1984, 6, 841.
78. Z. Yang, S. Sista, J. W. Elmer and T. DebRoy: Acta Mater., 2000, 48, 4813.
79. S. Sista: 'Computer simulation of grain growth in three dimensions by Monte Carlo technique', Masters dissertation, The Pennsylvania State University, PA, USA, 2000.
80. J. S. Huang, J. Zhang, A. Cuevas and K. N. Tu: Mater. Chem. Phys., 1997, 49, 33.
81. R. E. Reed-Hill and R. Abbaschian: 'Physical metallurgy principles', 3rd edn, 256-264; 1992, Boston, PWS-KENT Publishing Company.
82. P. Feltham and G. J. Copley: Acta Metall., 1958, 6, 539.
83. F. J. Gil, J. A. Picas, J. M. Manero, A. Forn and J. A. Planell: J. Alloy. Compd., 1997, 260, 147.
84. A. K. Shah, S. D. Kulkarni, V. Gopinathan and R. Krishnan: Weld. J., 1995, 74, 325s.
85. J. C. Ion, K. E. Easterling and M. F. Ashby: Acta Metall., 1984, 32, 1949.
86. B. Radhakrishnan and T. Zacharia: Metall. Mater. Trans. A, 1995, A26, 2123.
87. S. L. Semiatin, V. Seetharaman, D. M. Dimiduk and K. H. G. Ashbee: Metall. Mater. Trans. A, 1998, A29, 7.
88. R. Kaspar and N. Mahmoud: Mater. Sci. Technol., 1991, 7, 249.
89. L. Zhang, C. B. Zhang, Y. M. Wang, S. Q. Wang and H. Q. Ye: Acta Mater., 2003, 51, 5519.
90. M. Kumar, R. Sasikumar and P. K. Nair: Acta Mater., 1998, 46, 6291.
91. M. Vandyoussefi and A. L. Greer: Acta Mater., 2002, 50, 1693.
92. T. Tsuta, T. Iwamoto and B. Wang: Key Eng. Mater., 2003, 233-236, 521.
93. T. Wang, J. Jin and X. Zheng: J. Mater. Sci., 2002, 37, 2645.
94. I. Loginova, G. Amberg and J. Agren: Acta Mater., 2001, 49, 573.
95. M. A. Fortes and A. Soares: in 'Modeling of coarsening and grain growth', (ed. S. P. Marsh and C. S. Pande), 257; 1993, Warrendale, PA, IMS.
96. B. E. S. Lindblom, L. Berthold and N. E. Hannerz: Scand. J. Metall., 1991, 20, 305.
97. P. Zhu and R. W. Smith: Acta Metall Mater., 1992, 40, 683.
98. P. Zhu and R. W. Smith: Acta Metall. Mater., 1992, 40, 3369.
99. S. G. R. Brown, T. Williams and J. A. Spittle: Acta Metall. Mater., 1994, 42, 2893.
100. J. A. Spittle and S. G. R. Brown: Acta Metall., 1989, 37, 1803.
101. M. Rappaz, C.-A. Gandin, J. L. Desbiolles and P. Thevoz: Metall. Mater. Trans. A, 1996, A27, 695.
102. A. Jacot and M. Rappaz: Acta Mater., 1997, 45, 575.
103. V. V. Ploshikhin and H. W. Bergmann: in 'Mathematical modelling of weld phenomena 4', (ed. H. Cerjak), 150; 1998, London, IOM Communications.
104. A. Kermanpur, W. Wang, P. D. Lee and M. McLean: Mater. Sci. Technol., 2003, 19, 859.
105. J. Geiger, A. Roosz and P. Barkoczy: Acta Mater., 2001, 49, 623.
106. Y. Liu, T. Baudin and R. Penelle: Scr. Mater., 1996, 34, 1679.
107. D. J. Srolovitz, M. P. Anderson, G. S. Grest and P. S. Sahni: Acta Metall., 1984, 32, 1429.
108. G. Abbruzzese and K. Lucke: Mater. Sci. Forum, 1992, 94-96, 597.
109. S. Sista, Z. Yang and T. DebRoy: Metall. Mater. Trans. B, 2000, B31, 529.
110. W. B. Hutchinson: Int. Met. Rev., 1984, 29, 25.
111. R. Sasikumar, E. Jacob and B. George: Scr. Mater., 1998, 38, 693.
112. W. Kurz, B. Giovanola and R. Trivedi: Acta Metall., 1986, 34, 823.
113. K. Goebbels: 'Materials characterization for process control and product conformity'; 1994, Boca Raton, Florida, CRC Press.
114. M. Militzer, R. Pandi and E. B. Hawbolt: Metall. Mater. Trans. A, 1996, A27, 1547.
115. C. Y. Wang and C. Beckermann: Metall. Trans. A, 1993, A24, 2787.
116. M. Rappaz: Int. Mater. Rev., 1989, 34, 93.
117. C. Y. Wang and C. Beckermann: Metall. Mater. Trans. A, 1994, A25, 1081.
118. L.-Q. Chen: Annu. Rev. Mater. Res., 2002, 32, 113.
119. D. Fan, C. Geng and L.-Q. Chen: Acta Mater., 1997, 45, 1115.
120. C. E. Krill and L.-Q. Chen: Acta Mater., 2002, 50, 3057.
121. J. P. Simmons, C. Shen and Y. Wang: Scr. Mater., 2000, 43, 935.
122. S. M. Allen and J. W. Cahn: Acta Metall., 1979, 27, 1085.
123. A. L. Wilson, R. P. Martukanitz and P. R. Howell: Proc. 5th Int. Conf. on 'Trends in welding research', (ed. J. M. Vitek et al.), 161; 1999, Materials Park, OH, ASM International.
124. Z. Yang, J. W. Elmer, J. Wong and T. DebRoy: Weld. J., 2000, 79, 97s.
125. J. Gao, R. G. Thompson and Y. Cao: Proc. 4th Int. Conf. on Trends in welding research', (ed. H. B. Smartt et al.), 199; 1996, Materials Park, OH, ASM International.
126. G. S. Grest, D. J. Srolovitz and M. P. Anderson: Acta Metall., 1985, 33, 509.
127. M. P. Anderson, G. S. Grest and D. J. Srolovitz: Scr. Metall., 1985, 19, 225.
128. Y. Saito: ISIJ Int., 1998, 38, 559.
129. E. Ising: Z. Phys., 1925, 31, 253.
130. J. A. Glazier, M. P. Anderson and G. S. Grest: Philos. Mag. B, 1989, B62, 1318.
131. Z. Yang: 'Modeling weldment macro and microstructure from fundamentals of transport phenomena and phase transformation theory', PhD thesis, The Pennsylvania State University, PA, USA, 2000.
132. S. Mishra and T. DebRoy: Proc. 6th Int. Conf. on 'Trends in welding research', (ed. S. A. David et al.), 197; 2003, Materials Park, OH, ASM International.
133. M.-Y. Li and E. Kannatey-Asibu, Jr: Weld. J., 2002, 81, 37s.
134. R. M. Miranda and M. A. Fortes: Mater. Sci. Eng. A, 1989, A108, 1.
135. W. Zhang, G. G. Roy, J. W. Elmer and T. DebRoy: J. Appl. Phys., 2003, 93, 3022.
136. W. Zhang, C.-H. Kim and T. DebRoy: J. Appl. Phys., 2004, 95, 5210.
137. X. He, P. Fuerschbach and T. DebRoy: J. Appl. Phys., 2003, 94, 6949.
138. A. Kumar and T. DebRoy: J. Appl. Phys., 2003, 94, 1267.
139. J. J. Pepe and W. F. Savage: Weld. J., 1967, 46, 411s.
140. W. W. Mullins: J. Appl. Phys., 1956, 27, 900.
141. D. A. Aboav and T. G. Langdon: Metallography, 1969, 1, 333.
142. D. A. Aboav and T. G. Langdon: Metallography, 1969, 2, 171.
143. D. A. Aboav: Metallography, 1980, 13, 43.
144. D. A. Aboav: Metallography, 1970, 3, 383.
145. M. E. Glicksman, K. Rajan, J. Nordberg, M. Palmer, S. P. Marsh and C. S. Pande: Maler. Sci. Forum, 1992, 94-96, 909.
146. S. B. Singh and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 1998, 14, 832.
147. F. Wakai, N. Enomoto and H. Ogawa: Acta Mater., 2000, 48, 1297.