Reduced dependence on loading parameters in almost conforming contacts

International Journal of Mechanical Sciences

Volumn 48, Issue 9, 2006, Pages 917-925

  Ciavarella, M ^a   Baldini, A ^b   Barber, J R ^c   Strozzi, A ^b  

^a POLITECNICO DI BARI   (Italy)

^b UNIVERSITY OF MODENA AND REGGIO EMILIA   (Italy)

^c UNIVERSITY OF MICHIGAN   (United States)

Author keywords

Conforming contact; Pinned connections; Receding contact; Tolerances

Indexed keywords

BIOMECHANICS; FASTENERS; FITS AND TOLERANCES; FRICTION; GEOMETRY; STRUCTURAL LOADS;

CONFORMING CONTACT; CONTACT PROBLEMS; PINNED CONNECTIONS; RECEDING CONTACT;

INTERFACES (MATERIALS);

EID: 33745052646     PISSN: 00207403     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmecsci.2006.03.016     Document Type: Article

References (55)

1. Blake A. Design of mechanical joints (1985), Marcel Dekker, New York
2. American Institute of Steel Construction, Manual of Steel Construction, 8th ed. AISC, Chicago, 1980.
3. American Institute of Steel Construction, Load and Resistance Factor Design, 1st ed. AISC, Chicago, 1986.
4. American Petroleum Institute, API RP2A: Recommended Practice. (or Planning, Designing and Constructing Fixed Offshore Platforms), 18th ed. American Petroleum Institute, Dallas, 1989.
5. Bickley W.G. The distribution of stress round a circular hole in a plate. Philosophy Transactions of the Royal Society, London A 221 (1928) 383-415
6. Knight R.C. The action of a rivet in a plate of finite breadth. Philosophy Magazine, Series 7 19 (1935) 517-540
7. Howland R.C.J. On the stresses in the neighbourhood of a circular hole in a strip under tension. Philosophy Transactions of the Royal Society, London A 229 (1930) 49-86
8. Howland R.C.J., and Stevenson A.C. Bi-harmonic analysis in a perforated strip. Philosophy Transactions of the Royal Society, London A 232 (1933) 155-222
9. Theocaris P.S. The stress distribution in a strip loaded in tension by means of a central pin. Transactions of ASME, Applied Mechanics 78 (1956) 85-90
10. Mori K. Stress distributions in a semi-infinite plate with a row of circular holes. Bulletin of the JSME 15 (1972) 899-906
11. Coker E.G., and Filon L.N.G. A treatise on photoelasticity (1957), Cambridge University Press, Cambridge
12. Frocht M.M., and Hill H.N. Stress-concentration factors around a central circular hole in a plate loaded through pin in the hole. Transactions of ASME Applied Mechanics 62 (1940) A5-A9
13. Frocht M.M. Photoelasticity vol. 1 (1949), Wiley, New York
14. Jessop H.T., Snell C., and Holister G.S. Photoelastic investigation on plates with single interference-fit pins with load applied (a) to pin only and (b) to pin and plate simultaneously. Aeronautics Quarterly 9 (1958) 147-163
15. Cox H.L., and Brown A.F.C. Stresses round pins in holes. Aeronautics Quarterly 15 (1964) 357-372
16. Nisida M., and Saito H. Stress distributions in a semi-infinite plate due to a pin determined by interferometric method. Experimental Mechanics 6 (1966) 273-279
17. de Jong Th. Stress around pin-loaded holes in elastically orthotropic or isotropic plates. Journal of Computers and Materials 11 (1977) 313-331
18. Hyer MW, Liu D. Stresses in pin-loaded orthotropic plates using photoelasticity. NASA contractor report, CR-172498, NASA, USA 1984.
19. Rao A.K. Elastic analysis of pin joints. Computers and Structures 9 (1978) 125-144
20. Persson A. On the stress distribution of cylindrical elastic bodies in contact, Dissertation, Chalmers Tekniska Hogskola, Göteborg, 1964.
21. Johnson K.L. Contact mechanics (1985), Cambridge University Press, Cambridge
22. Ciavarella M., and Decuzzi P. The state of stress induced by the plane frictionless cylindrical contact. I. The case of elastic similarity. International Journal of Solids and Structures 38 (2001) 4507-4523
23. Ciavarella M., and Decuzzi P. The state of stress induced by the plane frictionless cylindrical contact. II. The general case (elastic dissimilarity). International Journal of Solids and Structures 38 (2001) 4525-4533
24. Dundurs J., and Stippes M. Role of elastic constants in certain contact problems. ASME Journal of Applied Mechanics 37 (1970) 965-970
25. Barber J.R. Elasticity. 2nd ed. (2002), Kluwer, Dordrecht
26. Dundurs J. Properties of elastic bodies in contact. In: de Pater A.D., and Kalker J.J. (Eds). The mechanics of the contact between deformable bodies (1975), Delft University Press, Delft 54-66
27. Filon L.N.G. On an approximate solution for the bending of a beam of rectangular cross-section under any system of load. Philosophical Transactions of the Royal Society (London) A 206 (1903) 63-155
28. Kauzlarich J.J., and Greenwood J.A. Contact between a centrally loaded plate and a rigid or elastic base, with application to pivoted pad bearings. Journal of Mechanical Engineering Science 215 (2001) 623-628
29. Keer L.M., Dundurs J., and Tsai K.C. Problems involving a receding contact between a layer and a half-space. ASME Journal of Applied Mechanics 39 (1972) 1115-1120
30. Fichera G. Boundary value problems of elasticity with unilateral constraints. Handbuch der Physik VI a/2 (1972), Springer, Berlin 391-424
31. Tsai K.C., Dundurs J., and Keer L.M. Contact between an elastic layer with a slightly curved bottom and a substrate. ASME Journal of Applied Mechanics 39 (1972) 821-823
32. Parlamento H. Exact analytical solution of the pressure distribution between gudgeon pin and conrod small end: application to the optimization of the small end geometry. PhD thesis, University of Modena, 2002.
33. Kumar K.S., Dattaguru B., and Ramamurthy T.S. Analysis of a cracked lug loaded by an interference fit pin. International Journal of Mechanical Sciences 38 (1996) 967-979
34. Wang G.S. Stress analysis for a lug under various conditions. Journal of Strain Analysis 29 (1994) 7-16
35. Dundurs J., and Comninou M. An educational elasticity problem with friction-Part I: Loading, and unloading for weak friction. ASME Journal of Applied Mechanics 48 (1981) 841-845
36. Spence D.A. The Hertz problem with finite friction. Journal of Elasticity 5 (1975) 297-319
37. StorÅkers B., and Elaguine D. Hertz contact at finite friction and arbitrary profiles. Journal of the Mathematics and Physics of Solids 53 (2005) 1422-1447
38. Johnson K.L., Kendall K., and Roberts A.D. Surface energy and the contact of elastic solids. Proceedings of the Royal Society (London) A 324 (1971) 301-313
39. Sackfield A., Mugadu A., and Hills D.A. The influence of an edge radius on the local stress field at the edge of a complete fretting contact. International Journal of Solids and Structures 39 (2002) 4407-4420
40. Churchman C., Mugadu A., and Hills D.A. Asymptotic results for slipping complete frictional contacts. European Journal of Mechanics A/Solids 22 (2003) 793-800
41. Dini D., Sackfield A., and Hills D.A. Comprehensive bounded asymptotic solutions for incomplete contacts in partial slip. Journal of the Mathematics and Physics of Solids 53 (2005) 437-454
42. Eshwar V.A. Analysis of clearance fit pin joints. International Journal of Mechanical Sciences 20 (1978) 477-484
43. Wearing J.L., Arnell P.P., and Patterson C. A study of the stress distribution in a lug loaded by a free fitting pin. Journal of Strain Analysis 20 (1985) 217-224
44. Naik RA, Crews JH. Stress analysis method for a clearance-fit bolt under bearing loads. AIAA Journal 1986; 1348-53.
45. Iyer K., Hahn G.T., Bastias P.C., and Rubin C.A. Analysis of fretting conditions in pinned connections. Wear 181-183 2 (1995) 524-530
46. Madenci E., Shkarayev S., Sergeev B., Oplinger D.W., and Shyprykevich P. Analysis of composite laminates with multiple fasteners. International Journal of Solids and Structures 35 15 (1998) 1793-1811
47. Yen S.W. Multirow joint fastener load investigation. Computers and Structures 9 5 (1978) 483-488
48. Ramamurthy T.S. Recent studies on the behaviour of interference fit pins in composite plates. Composite Structures 13 2 (1989) 81-99
49. Ramamurthy T.S. New studies on the effect of bearing loads in lugs with clearance fit pins. Composite Structures 11 2 (1989) 135-150
50. Mangalgiri P.D., Ramamurthy T.S., Dattaguru B., and Rao A.K. Elastic analysis of pin joints in plates under some combined pin and plate loads. International Journal of Mechanical Sciences 29 8 (1987) 577-585
51. Prabhakaran R., and Naik R.A. Investigation of non-linear contact for a clearance-fit bolt in a graphite/epoxy laminate. Composite Structures 6 1-3 (1986) 77-85
52. Mangalgiri P.D., Dattaguru B., and Rao A.K. Fasteners in composite plates: effects of interfacial friction. Computers and Mathematics with Applications 11 10 (1985) 1057-1068
53. Genin G.M., and Hutchinson J.W. Failures at attachment holes in brittle matrix laminates. Journal of Composite Materials 33 17 (1999) 1600-1619
54. Lewis G. Contact stress at articular surfaces in total joint replacements. Part I: Experimental methods; Part II: Analytical and numerical methods. Bio-Medical Materials and Engineering 1998;8(2):91-110; 8(5-6):259-78.
55. Hu X.Q., Isaac G.H., and Fisher J. Changes in the contact area during the bedding-in wear of different sizes of metal on metal hip prostheses. Bio-Medical Materials and Engineering 14 2 (2004) 145-149