Three-dimensional catalytic regeneration modeling of SiC diesel particulate filters

Journal of Engineering for Gas Turbines and Power

Volumn 128, Issue 2, 2006, Pages 421-433

  Pontikakis, George ^a   Stamatelos, Anastassios ^a  

^a UNIVERSITY OF THESSALY   (Greece)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; FILTERS (FOR FLUIDS); FINITE ELEMENT METHOD; MATHEMATICAL MODELS; OPTIMIZATION; PARTICULATE EMISSIONS;

CATALYTIC REGENERATION MODELING; DIESEL FILTER SYSTEMS; DIESEL PARTICULATE EMISSIONS; DIESEL PARTICULATE FILTERS;

DIESEL ENGINES;

COMPUTER SIMULATION; DIESEL ENGINES; FILTERS (FOR FLUIDS); FINITE ELEMENT METHOD; MATHEMATICAL MODELS; OPTIMIZATION; PARTICULATE EMISSIONS;

EID: 33646591254     PISSN: 07424795     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2130732     Document Type: Article

References (26)

1. Salvat, O., Marez, P., and Belot, G., 2000, "Passenger Car Serial Application of a Particulate Filter System on a Common Rail Direct Injection Diesel Engine," SAE Paper No. 2000-01-0473.
2. Koltsakis, G. C., and Stamatelos, A. M., 1997, "Catalytic Automotive Exhaust Aftertreatment," Prog. Energy Combust. Sci., 23, pp. 1-39.
3. Depcik, C. D., 2003, "Modeling Reacting Gases and Aftertreatment Devices for Internal Combustion Engines," Ph.D. Thesis, University of Michigan.
4. Stratakis, G. A., Pontikakis, G. N., and Stamatelos, A. M., 2004, "Experimental Validation of a Fuel Additive Assisted Regeneration Model in SiC Diesel Filters," Proc. Inst. Mech. Eng., Part D (J. Automob. Eng.), 218, pp. 203-216.
5. University of Thessaly/LTTE, 2003, "CATWALL Diesel Particulate Filter Modeling Software," User's Manual, Version v4r3 Volos, September.
6. Pontikakis, G., 2003, "Modeling, Reaction Schemes and Parameter Estimation in Catalytic Converters and Diesel Filters," Ph.D. thesis, Mechanical Engineering Dept., University of Thessaly, Volos (http://www.mie.uth.gr/labs/ltte/pubs/PhD_G_Pont.pdf).
7. Pontikakis, G., Stamatelos, A., Bakasis, K., and Aravas, N., 2002, "3-D Catalytic Regeneration and Stress Modeling of Diesel Particulate Filters by ABAQUS FEM Software", SAE Paper No. 2002-01-1017.
8. Bissett, E., and Shadman, F., 1985, "Thermal Regeneration of Diesel-Particulate Monolithic Filters", AIChE J., 31(5), pp. 753-765.
9. Bissett, E., 1984, "Mathematical Model of the Thermal Regeneration of a Wall-Flow Monolith Diesel Particulate Filter," Chem. Eng. Sci., 39, p. 1232.
10. Koltsakis, G. C., and Stamatelos, A. M., 1996, "Modeling Thermal Regeneration of Diesel Particulate Traps," AIChE J., 42(6), pp. 1662-1672.
11. Koltsakis, G. C., and Stamatelos, A. M., 1996, "Modeling Catalytic Regeneration of Diesel Particulate Traps," Ind. Eng. Chem. Res., 35, pp. 2-13.
12. Koltsakis, G. C., and Stamatelos, A. M., 1997, "Modes of Catalytic Regeneration in Diesel Particulate Filters," Ind. Eng. Chem. Res., 36, pp. 4155-4165.
13. Stratakis, G., 2004, "Experimental Investigation of Catalytic Soot Oxidation & Pressure Drop Characteristics in Wall-Flow Diesel Particulate Filters", Ph.D. thesis, Mechanical Engineering Dept., University of Thessaly, (http://www.mie.uth.gr/labs/ltte/pubs/ PhD_Stratakis.pdf).
14. Haralampous, O., and Koltsalkis, G., 2002, "Intra-layer Temperature Gradients During Regeneration of Diesel Particulate Filters," Chem. Eng. Sci., 57, pp. 2345-2355.
15. Aoki H., Asano, A., Kurazono, K., Kobashi, K., and Sami., H., 1993, "Numerical Simulation Model for the Regeneration Process of a Wall-Flow Monolith Diesel Particulate Filter," SAE Paper No. 930364.
16. Miyairi, Y., Miwa, S., Abe, F., Xu, Z., and Nakasuji, Y., 2001, "Numerical Study on Forced Regeneration of Wall-Flow Diesel Particulate Filter," SAE Paper No. 2001-01-0912.
17. Opris, C. N., and Johnson, J. H., 1998, "A Two-Dimensional Computational Model Describing the Flow and Filtration Characteristics of a Ceramic Diesel Particulate Trap", SAE Paper No. 980545.
18. Stratakis, G. A., and Stamatelos, A. M., 2004, "Flow, Distribution Effects in the Loading and Catalytic Regeneration of Wall-Flow Diesel Particulate Filters," Proc. Inst. Mech. Eng., Part D (J. Automob. Eng.), 218, pp. 203-216.
19. Gaiser, G., 2004, "Prediction of Pressure Drop in Diesel Particulate Filters Considering Ash Deposit and Partial Regenerations," SAE Paper No. 2004-01-0158.
20. "Guide to ANSYS User Programmable Features. Guide to Interfacing With ANSYS," ANSYS 5.7 User's Manual. ANSYS Inc., Canonsburg, PA, May 2001.
21. Sorenson, S. C., Hoj, J. W., and Stobbe, P., 1994, "Flow Characteristics of SiC Diesel Particulate Filter Materials," SAE Paper No. 940236.
22. Ebener, S., and Florchinger, P., 2000, "Drukverlustmodel Fuer Keramische Dieselpartikelfilter," Motortech. Z., 61(6), pp. 414-422.
23. Incropera, F. P., and DeWitt, D. P., 1996, Fundamentals of Heat and Mass Transfer, 4th ed., John Wiley and Sons, New York.
24. Stoecker, W. F., 1989, Design of Thermal Systems, 3rd ed., McGraw-Hill, New York.
25. University of Thessaly/LTTE, 2003, "ANSYS 5.7-CATWALL v4r3 Interfacing: 3D Modeling of Diesel Particulate Filters," User's Manual. Version v4r3 Volos, December.
26. Stratakis, G. A., and Stamatelos, A. M., 2003, "Thermogravimetric Analysis of Soot Emitted by a Modern Engine Run on Catalyst-Doped Fuel," Combust. Flame, 132, pp. 157-169.