Catalytic automotive exhaust aftertreatment

Progress in Energy and Combustion Science

Volumn 23, Issue 1, 1997, Pages 1-39

  Koltsakis, Grigorios C ^a   Stamatelos, Anastasios M ^a  

^a ARISTOTLE UNIVERSITY OF THESSALONIKI   (Greece)

Author keywords

Automobile; Catalysis; Chemical reactors; Emission control

Indexed keywords

AIR POLLUTION CONTROL; AIR QUALITY; AUTOMOBILE ENGINES; CATALYST REGENERATION; DIESEL ENGINES; DURABILITY; EXHAUST GASES; EXHAUST SYSTEMS (ENGINE); IGNITION; MATHEMATICAL MODELS; OPTIMIZATION; PARTICULATE EMISSIONS;

AUTOMOBILE EMISSION CONTROLS; COMPRESSION IGNITION ENGINES;

CATALYTIC CONVERTERS;

EID: 0031332959     PISSN: 03601285     EISSN: None     Source Type: Journal    
DOI: 10.1016/s0360-1285(97)00003-8     Document Type: Article

References (192)

1. Heywood, J. B., Internal Combustion Engine Fundamentals. McGraw-Hill (1988).
2. Taylor, K. C., in Catalysis, J. Anderson and M. Boudart, eds. Springer, Berlin (1981).
3. Gallopoulos, N. E., Bridging the Present to the Future in Personal Transportation - the Role of Internal Combustion Engines. SAE paper 920721 (1992).
4. Conti, L., Ferrera, M., Garlaseo, R., Volpi, E., Cornetti, G. M., Rationale of Dedicated Low Emitting CNG Cars. SAE 932763 (1993).
5. Rijkeboer, R. C., Hendrikson, P., Hollemans, B., van der Weide, J., Potential Impact of Four Different Car Fuels on the Dutch Environments. SAE paper 941914 (1994).
6. Harris, J. N., Russell, A. G., Milford, J. B., Air Quality Implications of Methanol Fuel Utilization. SAE paper 881198 (1988).
7. Moses, D., Saricks, C., A Review of Methanol Vehicles and Air Quality Impacts. SAE paper 872053 (1987).
8. Kummer, J. T., Catalysts for automobile emission control. Prog. Energy Combust. Sci. 6, 177-199 (1980).
9. Day, J. P., The Design of a new Ceramic Catalyst Support. SAE paper 902167 (1990).
10. Harkonen, M., Kivioja, M., Maunula, T., Slotte, T., Vakkilainen, A., Performance and Durability of Palladium Only Metallic Three-Way Catalyst. SAE paper 940935 (1994).
11. Ichihara, S., Onoda, H., Garr, G. T., Psaras, D., Engler, B. H., Lox, E. S., Ostgathe, K., Ohata, T., Tsuchitani, K., Recent Trends in the Application of Tri-Metal Emission Control Catalysts. SAE paper 940928 (1994).
12. Nunan, J. G., Williamson, W. B., Robota, H. J. and Henk, M. G., Impact of Pt Rh and Pd Rh Interactions on Performance of Bimetal Catalysts. SAE paper 950258 (1995).
13. Golunski, S. E., Hatcher, H. A., Rajaram, R. R., Bennett, C. J. and Truex, T. J., Low Light Off Catalyst Technology and its Low Emission Vehicle Application. SAE paper 950408 (1995).
14. Muraki, H., Shinjoh, H. and Fujitani, Y., Appl. Cat. 27, 325-335 (1986).
15. Brisley, R. J., Chandler, G. R., Jones, H. R., Anderson, P. J. and Shady, P. J., The Use of Palladium in Advanced Catalysts. SAE paper 950259 (1995).
16. Muraki, H., Kimura, M. and Fujitani, Y., Nitric oxide reduction performance of automotive palladium catalysts. Appl. Cat. 48, 95-105 (1989).
17. Muraki, H., Sobukausa, M., Kimura, M. and Isogai, A., The Effect of Palladium on the Performance of Three Way Catalysts. SAE technical paper series, 900610 (1990).
18. Matsuura, S., Hirai, A., Arimura, K. and Shinjoh, H., Development of Three Way Catalyst Using only Pd as Activator SAE paper 950257 (1995).
19. Punke, A., Dahle, U., Tauster, S. J., Rabinowitz, H. N. and Yamada, T., Trimetallic Three Way Catalysts. SAE paper 950255 (1995).
20. Oh, S. H., Effects of cerium addition on the CO-NO reaction kinetics over alumina-supported rhodium catalysts. J. Catal. 124, 477-487 (1990).
21. Diwell, A. F., Rajaram, R. R., Shaw, H. A. and Truex, T. J., The role of ceria in three-way catalysts, in Catalysis and Automotive Pollution Control II, Elsevier Science, Amsterdam (1991).
22. Nunan, J. G., Robota, H. J., Cohn, M. J. and Bradley, S. A., Physico-chemical properties of Ce-containing three-way-catalysts and the effect of Ce on catalyst activity, in Catalysis and Automotive Pollution Control II, Elsevier Science, Amsterdam (1991).
23. Taylor, K. C. and Schlatter, J. C., J. Catal. 63, 53 (1980).
24. Lee, S. T. and Aris, R., On the effects of radiative heat transfer in monoliths. Chem. Engng Sci. 32, 827-837 (1977).
25. Mondt, J. R., Adapting the heat and mass transfer analogy to model performance of automotive catalytic converters. Trans. ASME J. Engng Gas Turbines Power, 109, 200-206 (1987).
26. Bella, G., Rocco, V. and Maggiore, M., A study of inlet flow distortion effects on automotive catalytic converters. Trans. ASME J. Engng Gas Turbines Power, 113, 419-426 (1991).
27. Wendland, D. W. and Matthes, W. R., Visualization of Automotive Catalytic Converter Internal Flows. SAE paper 861554 (1986).
28. Lai, M. C., Lee, T., Kim, J. Y., Cheng, C. Y., Li, P. and Chui, G., Numerical and experimental characterizations of automotive catalytic converter internal flows. J. Fluid. Struct. 6, 451-470 (1992).
29. Weltens, H., Bressler, H., Terres, F., Neumeier, H. and Rammoser, D., Optimization of Catalytic Converter Gas Flow Distribution by CFD Prediction. SAE paper 930780 (1993).
30. Katashiba, H., Nishida, M., Washino, S., Takahashi, A., Hashimoto, T. and Miyake, M., Fuel Injection Control Systems that Improve Three Way Catalyst Conversion Efficiency. SAE paper 910390 (1991).
31. Silveston, P. L., Automotive exhaust catalysis: is periodic operation beneficial? Chem. Engng Sci. 51 (10), 2419-2426 (1996).
32. Hendricks, E., Chevalier, A., Jensen, M., Sorenson, S. C., Trumpy, D. and Asik, J., Modelling of the intake manifold filling dynamics. SAE paper 960037 (1996).
33. Onder, C. H. and Geering, H. P., Model-Based Multivariable Speed and Air-to-Fuel Ratio Control of an SI-Engine. SAE paper 930859 (1993).
34. Barbier, J. Jr and Duprez, D., Reactivity of steam in exhaust gas catalysts. Appl. Catal. B3, 61-83 (1993).
35. Schlatter, J. C. and Mitchell, P. J., Three-way catalyst response to transients. Ind. Engng Chem. Prod. Res. Dev. 19, 288 (1980).
36. Voltz, S. E., Morgan, C. R., Liederman, D. and Jacob, S. M., Kinetic study of carbon monoxide and propylene oxidation on platinum catalysts. Ind. Engng Chem. Prod. Res. Dev. 12, 294 (1973).
37. 2O system. Ind. Engng Chem. Prod. Res. Dev. 24, 512-516 (1985).
38. Montreuil, C., Williams, S. and Adamszyk, A., Modeling Current Generation Catalytic Converters: Laboratory Experiments and Kinetic Parameter Optimization - Steady State Kinetics. SAE paper 920096 (1992).
39. Pattas, K. N., Stamatelos, A. M., Pistikopoulos, P. K., Koltsakis, G. C., Konstantinidis, P. A., Volpi, E. and Leveroni, E., Transient Modeling of 3-Way Catalytic Converters. SAE paper 940934 (1994).
40. Koberstein, E. and Wannemacher, G., The A/F window with three-way catalysts. Kinetic and surface investigations, in Catalysis and Automotive Pollution Control, Elsevier Science, Amsterdam (1987).
41. Bozek, J. W., Evans, R., Tyree, C. D. and Zerafa, K. I., Operating Characteristics of Zirconia Galvanic Cells (Lambda Sensors) in Automotive Closed-Loop Emission Control Systems. SAE paper 920289 (1992).
42. Herz, R. K., Dynamic behavior of automotive catalysts. 1. Catalyst oxidation and reduction. Ind. Engng Chem. Prod. Res. Dev. 20, 451-457 (1981).
43. Matsunaga Schin-ichi, Yokota, K., Muraki, H., Fujitani, Y., Improvement of Engine Emissions Over Three-Way catalyst by the Periodic Operations. SAE paper 872098 (1987).
44. Herz, R. K., Klela, J. B., Sell, J. A., Dynamic behavior of automotive catalysts. 2. Carbon monoxide conversion under transient air/fuel ratio conditions. Ind. Engng Chem. Prod. Res. Dev. 22, 387-396 (1983).
45. Taylor, K. C. and Sinkevitch, R. M., Behavior of automobile exhaust catalysts with cycled feedstreams. Ind. Eng. Chem. Prod. Res. Dev. 22, 45-51 (1983).
46. Schlatter, J. C., Sinkevitch, R. M. and Mitchell, P. J., Laboratory reactor system for three-way automotive catalyst evaluation. Ind. Engng Chem. Prod. Res. Dev. 22, 51-56 (1983).
47. Smedler, G., Eriksson, S., Lindblad, M., Bernler, H., Lundgren, S. and Jobson, E., Deterioration of Three-Way Automotive Catalysts, Part II - Oxygen Storage Capacity at Exhaust Conditions. SAE paper 930944 (1993).
48. Schweich, D., Laboratory data for three-way catalytic converter modeling, in Catalysis and Automotive Pollution Control III, Elsevier Science, Amsterdam (1993).
49. Koltsakis, G. C., Konstantinidis, P. A. and Stamatelos, A. M., Development and application range of mathematical models for automotive 3-way catalytic converters. Appl. Cat., B Environ. (in press).
50. Koltsakis, G. C., Konstantinidis, P. A. and Stamatelos, A. M., Exploitation of laboratory data for 3-way catalytic converter Assessment and Modeling. Chem. Engng Comm. (submitted).
51. Summers, J. C. and Silver, R. G., Catalytic control issues associated with the use of reformulated gasolines, in SAE Transactions 1990, Vol. 99, Section 4, pp. 556-567, SAE paper 902072 (1990).
52. Subramanian, S., Kudla, R. J. and Chattha, M. S., Removal of methane from compressed natural gas fueled vehicle exhaust. Ind. Engng Chem. Res. 31, 2460-2465 (1992).
53. Carol, L. A., Newman, N. E. and Mann, G. S., High Temperature Deactivation of Three-Way Catalyst. SAE paper 892040 (1989).
54. Kubsh, J. E., Rieck, J. S. and Spencer, N. D., Cerium oxide stabilization: physical property and three-way activity considerations, in Catalysis and Automotive Pollution Control II, A. Crucq, Ed., Elsevier Science, Amsterdam (1991).
55. Heck, R. M., Hochmuth, J. K. and Dettling, J. C., Effect of Oxygen Concentration on Aging of TWC Catalysts. SAE paper 920098 (1992).
56. Oh, S. H., Thermal Response of Monolithic Catalytic Converters During Sustained Engine Misfiring: a Computational Study, SAE paper 881591 (1988).
57. Jobson, E., Laurell, M., Hoegberg, E., Bernler, H., Lundgren, S., Wirmark, G. and Smedler, G., Deterioration of Three-Way Automotive Catalysts, Part I -Steady State and Transient Emission of Aged Catalyst. SAE paper 930937 (1993).
58. Siebler et al., Gemeinsames Katalysatorpruefverfahren von Audi, BMW, Mercedes-Benz, Porsche und VW. Motortechnische Zeitschrift 55, 4 (1994).
59. Bartley, G. J. J., Shady, P. J., D'Aniello, M. J., Chandler, G. R., Brisley, R. J. and Webster, D. E., Advanced Three-Way Catalyst Formulations for High Temperature Applications. SAE paper 930076 (1993).
60. Summers, J. C., Williamson, W. B. and Scaparo, J. A., The Role of Durability and Evaluation Conditions on the Performance of Pt/Rh and Pd/Rh Automotive Catalysts. SAE paper 900495 (1990).
61. Pattas, K. N., Stamatelos, A. M., Pistikopoulos, P. K., Koltsakis, G. C., Konstantinidis, P. A., Volpi, E. and Leveroni, E., Computer Aided Assessment of Catalyst Ageing Cycles. SAE paper 950934 (1995).
62. Otto, K., Dalla Betta, R. A. and Yao, H. C., J. Air Pollution Control Assoc. 24, 596 (1994).
63. Hu, Z. and Heck, R. M., High Temperature Ultra Stable Close-Coupled Catalysts. SAE paper 950254 (1995).
64. Konstantinidis, P. A., Koltsakis, G. C. and Stamatelos, A. M., Computer aided assessment and optimization of fast light-off techniques. Proc. IMechE, D: J. Automobile Engng 211, 21-37.
65. Burk, P. L., Hochmuth, J. K., Anderson, D. R., Sung, S., Tauster, S. J., Tolentino, C. O., Rogalo, J., Miles, G., Niejako, M., Punke, A. and Dahle, U., Cold Start Hydrocarbon Emissions Control. SAE paper 950410 (1995).
66. Williams, J. L., Patil, M. D. and Hertl, W., By-Pass Hydrocarbon Adsorber System for ULEV. SAE paper 960343 (1996).
67. Hertl, W., Patil, M. D. and Williams, J. L., Hydrocarbon Adsorber System for Cold Start Emissions. SAE paper 960347 (1996).
68. Patil, M. D., Hetl, W., Williams, J. L. and Nagel, J. N., In-Line Hydrocarbon Adsorber System for ULEV. SAE paper 960348 (1996).
69. Socha, L. S. Jr. and Thompson, D. F., Electrically Heated Extruded Metal Converters for Low Emission Vehicles. SAE paper 920093 (1992).
70. Socha, L. S. Jr., Thompson, D. F. and Weber, P. A., Optimization of Extruded Electrically Heated Catalysts. SAE 940468 (1994).
71. Pfalzgraf, B., Otto, E., Wirth, A., Kueper, P. F., Held, W. and Donnerstag, A., The System Development of Electrically Heated Catalyst (EHC) for the LEV and EU-III legislation. SAE 951072 (1995).
72. Socha, L. S. Jr., Thompson, D. F., Smith, D. K. and Weber, P. A., Emissions Performance of Extruded Heated Catalysts in Several Vehicle Applications. SAE paper 950405 (1995).
73. Haefele, E., Schoenauer, U. and Seeger, W., Sensorsysteme fuer Low-Emission-Fahrzeuge mit Katalysator-Ueberwachung. Automobil Technische Zeitschrift 95, 5 (1993).
74. Oeser, P., Mueller, E., Haertel, G. R. and Schuerfeld, A. O., Novel Emission Technologies with Emphasis on Catalyst Cold Start Improvements Status Report on VW-Pierburg Burner/Catalyst Systems. SAE paper 940474 (1994).
75. Ma, T., Collins, N. and Hands, T., Exhaust Gas Ignition (EGI) - a New Concept for Rapid Light-Off of Automotive Exhaust Catalyst. SAE paper 920400 (1992).
76. Kollmann, K., Abthoff, J., Zahn, W., Bischof, H. and Göhre, J., Secondary Air Injection with a New Developed Electrical Blower for Reduced Exhaust Emissions. SAE 940472 (1994).
77. Amon-Meziere, I., Castagna, F., Prigent, M. and Pentenero, A., Speciated Hydrocarbon Conversion on a Fresh Pd/Rh Three-Way Catalyst. SAE paper 950932 (1995).
78. Glóck, K. H., Lox, E., Schofer-Sindlinger, A., Kreuzer, T. and Muniz, R. S., Catalyst Development for Stoichiometric and Lean Burn Natural Gas Engines. SAE-Brasil paper 942419 (1994).
79. Oh, S. H., Mitchell, P. J. and Siewert, R. M., Methane oxidation over alumina supported noble metal catalysts with and without cerium additives. J. Catal. 132, 287 (1991).
80. Cullis, C. F. and Willat, B. M., J. Catal. 83, 17 (1983).
81. Conti, L., Saroglia, G. P., van Yperen, R., Stamatelos, A. M. and Koltsakis, G. C., Development of dedicated CNG-fuelled ultra low emitting cars, in ATA Conference on Alternative and Bio Fuels: Production and Use, Lecce, Italy (1996).
82. Thomas, C. L., Catalytic Processes and Proven Catalysts. Academic Press, New York (1970).
83. McCabe, R. and Mitchell, P., Exhaust-catalyst development for methanol-fuelled vehicles: 1. A comparative study of methanol oxidation over alumina supported catalysts containing group 9, 10 and 11 metals. Appl. Catal. 27, 83 (1986).
84. Oh, S. H. and Bissett, E. J., Mathematical Modeling of Monolith Warmup Behavior in Variable-Fuel Vehicle Exhaust. SAE paper 932721 (1993).
85. Calvert, J. G., Heywood, J. B., Sawyer, R. F., Seinfeld, J. H., Achieving acceptable air quality: some reflections on controlling vehicle emissions. Science, 261 (1993).
86. Clemmens, W. B., Sabourin, M. A. and Rao, T., Detection of Catalyst Performance Loss Using On-Board Diagnostics. SAE paper 900062 (1990).
87. Hansen, J., OBD in a European context, in Proc. 1st Int. Conf. on Control and Diagnostics in Automotive Applications, Genova, Italy (1996).
88. Koltsakis, G. C. and Stamatelos, A. M., Detection of automotive catalyst failure by use of on-board diagnostics. Proc. IMechE, D: J. Automotive Engng, 209, 171-182 (1995).
89. Clemmens, W. B., Sabourin, M. A. and Rao, T., Detection of Catalyst Performance Loss Using On-Board Diagnostics. SAE paper 900062 (1990).
90. Koberstein, E. and Voelker, H., Wirkungsweise und Charakterisierung multifunktioneller Autoabgas-Katalysatoren. Chem. Ing. Tech. (1978).
91. Yamada, T., Hayakawa, N., Kami, Y. and Kawa, T., Universal Air-Fuel Ratio Heated Exhaust Gas Oxygen Sensor and Further Applications. SAE paper 920234 (1992).
92. Eastwood, P., Fischer, S., Konzept zur Ueberpruefung der Funktionstauglichkeit des Abgaskatalysators. Automobil Technische Zeitschrift 96, Vol. 1, pp. 18-24 (1994).
93. Fisher, G. B., Theis, J. R., Casarella, M. V. and Mahan, S. T., The Role of Ceria in Automotive Exhaust Catalysis and OBD-II Catalyst Monitoring. SAE paper 931034 (1993).
94. Shimashaki, Y., Kato, H., Muramatsu, H., Teshirogi, T., Aoki, T., Saito, A. and Rodrigues, G., Study of Conformity Technology with ULEV Using EHC System, SAE paper 960342 (1996).
95. Shimashaki, Y., Kato, H., Muramatsu, H., Teshirogi, T., Aoki, T., Saito, A. and Rodrigues, G., Study of Conformity Technology with ULEV Using EHC System. SAE paper 960342 (1996).
96. Haefele, E., Schoenauer, U. and Seeger, W., Sensorsysteme fuer Low-Emission-Fahrzeuge mit Katalysator-Ueberwachung. Automobil Technische Zeitschrift 95, Vol. 5 (1993).
97. Cai, W. and Collins, N., Unburnt Hydrocarbon Measurement by Means of a Surface Ionisation Detector. SAE paper 910254 (1991).
98. Theis, J. R., Catalytic Converter Diagnosis Using the Catalyst Exotherm. SAE paper 942058 (1994).
99. Collins, N., Cai, W., Ma, T. and Ball, D., A Linear Temperature Sensor for Exhaust Gas Ignition (EGI) and On Board Diagnosis of Misfire and Catalyst Efficiency. SAE paper 930938 (1993).
100. Pelters, S., Schwarzenthal, D., Maus, W., Swars, H. and Bróck, R., Alternative Technologies for Studying Catalyst Behaviour to Meet OBD II Requirements. SAE paper 932854 (1993).
101. Nobuhido Kato, Nobukazu Ikoma and Satshi Nishikawa, Exhaust Gas Temperature Sensor for OBD-II Catalyst Monitoring. SAE paper 960333 (1996).
102. Koltsakis, G. C., Stamatelos, A. M., Konzept zur Katalysatorueberpruepung durch Reaktionswaermeermittlung. Motortechnische Zeitschrift (MTZ) (1997).
103. Kuo, J. C. W., Lassen, H. G. and Morgan, C. R., Mathematical Modeling of CO and HC Catalytic Converter Systems. SAE paper 710289 (1971).
104. Vortruba, J., Sinkole, J., Hlavacek, V. and Skrivanek, J., Heat and mass transfer in monolithic honeycomb catalysts - I. Chem. Engng Sci. 30, 117 (1975).
105. Young, L. C. and Finlayson, B. A., Mathematical models of the monolith catalytic converter: part I. Development of model and application of orthogonal collocation. AIChE J. 22 (2), 331-343 (1976).
106. Heck, R. H., Wei, J. and Katzer, J. R., Mathematical modeling of monolithic catalysts. AIChE J. 22 (3), 477-484 (1976).
107. Otto, N. O. and LeGray, W. J., Mathematical Models for Catalytic Converter Performance. SAE paper 800841 (1980).
108. Oh, S. H., Cavendish, J. C. and Hegedus, L. L., Mathematical modeling of catalytic converter lightoff: single-pellet studies. AIChE J. 26, 935 (1980).
109. Oh, S. H. and Cavendish, J. C., Mathematical modeling of catalytic converter lightoff - Part II: model verification by engine-dynamometer experiments'. AIChE J. 31 (6) (1985).
110. Oh, S. H. and Cavendish, J. C., Mathematical modeling of catalytic converter lightoff - Part III: prediction of vehicle exhaust emissions and parametric analysis. AIChE J. 31 (6) (1985).
111. Flytzani-Stephanopoulos, M., Voecks, G. E. and Charng, T., Modeling of heat transfer in non-adiabatic monolithic reactors and experimental comparisons of metal monoliths with packed beds. Chem. Engng Sci. 41, 1203-1212 (1986).
112. Zygourakis, K., Transient operation of monolith converters: a two dimensional reactor model and the effects of radially nonuniform flow distributions. Chem. Engng Sci. 44, 2075-2086 (1989).
113. Chen, D. K. S., Bissett, E. J., Oh, S. H. and Van Ostrom, D. L., A Three Dimensional Model for The Analysis of Transient Thermal and Conversion Characteristics of Monolithic Catalytic Converters. SAE paper 880282 (1988).
114. Gottberg, I., Rydquist, J. E., Backlund, O., Wallman, S., Maus, W., Brueck, R. and Swars, H., New Potential Exhaust Gas Aftertreatment Technologies for 'Clean Car' Legislation. SAE paper 910840 (1991).
115. Siemund, S., Schweich, D., Leclerc, J. P. and Villermaux, J., Modelling three-way monolithic converter: comparison between simulation and experimental data, in Catalysis and Automotive Pollution Control III, Elsevier Science, Amsterdam (1993).
116. Spicher, U. and Lepperhoff, G., Instationaerverhalten des Abgaskatalysators. Motortechnische Zeitschrift 56, 6 (1995).
117. Herz, R. K. Dynamic behavior of automotive three-way emission control systems, in Catalysis and Automotive Pollution Control, p. 427, Elsevier Science, Amsterdam (1987).
118. Walsh, M., Global Trends in Diesel Particulate Control - A 1995 Update. SAE paper 950149 (1995).
119. Trayser, D. A., Blosser, E. R. and Pierson, W. R., Sulfuric Acid and Nitrate Emissions from Oxidation Catalysts. SAE paper 750091 (1975).
120. Hunter, J. E., Studies of Catalyst Degradation in Automotive Emission Control Systems. SAE paper 720122 (1972).
121. Henk, M. G., Williamson, W. B. and Silver, R. G., Diesel Catalysts for Low Particulate and Low Sulfur Emissions. SAE paper 920368 (1992).
122. Zelenka, P., Ostgathe, K. and Lox, E., Reduction of diesel exhaust emissions by using oxidation catalysts. SAE paper 902111 (1990).
123. Standt, U. D. and Konig, A., Performance of Zeolite Based Diesel Catalysts. SAE paper 950749 (1995).
124. Smedler, G., Ahlstroem, G., Fredholm, S., Frost, J., Loof, R., Marsh, P., Walker, A. and Winterborn, D., High Performance Diesel Catalysts for Europe Beyond 1996. SAE paper 950750 (1995).
125. x Catalyst System for Diesel Vehicles. SAE paper 952493 (1995).
126. Li Yuejin and Hall, W. K., Catalytic decomposition of nitric oxide over Cu-zeolites. J. Catal. 129, 202-215 (1991).
127. x from Diesel Engines: Status and Technical Challenges. SAE paper 950747 (1995).
128. Sato, S., Yu-u Y., Yahiro, H., Mizuno, N. and Iwamoto, M., Cu-ZSM-5 zeolite as highly active catalyst for removal of nitrogen monoxide from emission of diesel engines. Appl. Catal. 70, L1-L5 (1991).
129. x Reduction for On-Highway Trucks. SAE 950154 (1995).
130. Grindsted, R. A., Jen, H. W., Montreuil, C. N., Rokosz, M. J. and Shelef, M., The Relation between deactivation of CuZSM-5 in the selective reduction of NO and dealumination of the zeolite. Zeolites 13(8), 602-606 (1993).
131. Zelenka, P., Cartellieri, W. and Herzog, P., Worldwide diesel emission standards, current experiences and future needs. Appl. Catal. B Environ. 10, 3-28 (1996).
132. Moser, F., Haas, E. and Schloegl, H., Zur Partikelemission von Nutzfahrzeug-Dieselmotoren. Motortechnische Zeitschrift (MTZ) 51 (1990).
133. Howitt, J. S. and Montierth, M. R., Cellular Ceramic Diesel Particulate Filter. SAE paper 810114 (1981).
134. Abthoff, J., Schuster, H. D., Langer, H. J. and Loose, G., The Regenerable Trap Oxidizer - an Emission Control Technique for Diesel Engines. SAE paper 850015 (1985).
135. Johnson, J. H., Bagley, S. T., Gratz, L. D. and Leddy, D. G., A Review of Diesel Particulate Control Technology and Emission Effects. SAE paper 940233 (1994).
136. Hoepke, E., Partikelfilter fuer Omnibusse und Kommunal-fahrzeuge. Automobile Technische Zeitschrift 91 s.680, 12 (1989).
137. Rao, V. D. N. and Cicanek, H. A., Diesel Particulate Control System for Ford 1.8L Sierra Turbo-Diesel to Meet 1997-2003 Particulate Standards. SAE paper 940458 (1994).
138. Weaver, C. S., Particulate Control Technology and Particulate Standards for Heavy Duty Diesel Engines. SAE paper 840174 (1984).
139. Montierth, M., Fuel Additive Effect upon Diesel Particulate Filters. SAE paper 840072 (1984).
140. Wiedemann, B., Doerges, U., Engeler, W. and Poettner, B. Regeneration of Particulate Filters at Low Temperatures. SAE paper 830086 (1983).
141. Wiedemann, B. and Neumann, K., Vehicular Experience with Additives for Regeneration of Ceramic Diesel Filters. SAE paper 850017 (1985).
142. Wiedemann, B., Doerges, U., Engeler, W. and Poettner, B., Application of Particulate Traps and Fuel Additives for Reduction of Exhaust Emissions. SAE paper 840078 (1984).
143. Lepperhoff, G., Lueders, H., Barthe, P. and Lemaire, J., Quasi-Continuous Particle Trap Regeneration by Cerium-Additives. SAE paper 950369 (1995).
144. Pattas, K. N. and Michalopoulou, C. C., Catalytic Activity in the Regeneration of the Ceramic Diesel Particulate Trap. SAE paper 920362 (1992).
145. Pattas, K. N., Samaras, Z., Patsatzis, N., Michalopoulou, C., Zogou, O., Stamatelos, A. and Barkis, M., On-Road Experience with Trap Oxidizer Systems Installed on Urban Buses. SAE paper 900109 (1990).
146. Lox, E. S., Engler, B. H. and Koberstein, E., Diesel emission control, in Catalysis and Automotive Pollution Control II, A. Crucq, Ed., Elsevier Science, Amsterdam (1991).
147. Enga, B., Buchmann, M. and Lichtstein, I., Catalytic Control of Diesel Particulate. SAE paper 820184 (1982).
148. Koberstein, E., Pletka, H. and Voelker, H., Catalytically Activated Diesel Exhaust Filters: Engine Test Methods and Results. SAE paper 830081 (1983).
149. Rao, V., White, J., Wade, W., Aimaone, M. and Cikanek, H., Advanced Techniques for Thermal and Catalytic Diesel Particulate Trap Regeneration. SAE paper 850014 (1985).
150. Wade, W., White, J., Florek, J. and Cikanek, H., Thermal and Catalytic Regeneration of Diesel Particulate Traps. SAE paper 830083 (1983).
151. McCabe, R. W. and Sinkevitch, R. M., A Laboratory Combustion Study of Diesel Particulate Containing Metal Additives. SAE paper 860011 (1986).
152. Wiedemann, B., Mueller, E., Preuss, A. and Schaedlich, H., Diesel-Partikelfiltersystem mit Additivgestuetzter Regeneration. Automobil Technische Zeitschrift 91, vol. 12 (1989).
153. Wiedemann, B. and Neumann, K., Vehicular Experience with Additives for Regeneration of Ceramic Diesel Filters. SAE paper 850017 (1985).
154. Wade, W., White, J., Florek, J. and Cikanek, H., Thermal and Catalytic Regeneration of Diesel Particulate Traps. SAE paper 830083 (1983).
155. Hoffman, U. and Ma, J., Study on regeneration of diesel particulate filter using a laboratory reactor. Chem. Engng Technol. 13, 251-258 (1990).
156. Hoffmann, U., Rieckmann, T. and Ma, J., Kinetic study and modeling of diesel particulate filter regeneration. Chem. Engng Sci. 44 (1991).
157. Simon, G., Stark, T., Diesel Particulate Trap Regeneration Using Ceramic Wall-Flow Traps, Fuel Additives and Supplemental Electrical Ingitors. SAE paper 850016 (1985).
158. Frohne, J., Reisig, H. and Schaedlich, K., Thermoanalytische Methoden zur Characterisierung von Dieselruss. Wissenschaft Technik, 4, 42 (1989).
159. Peterson, R. C. SAE paper 870628 (1987).
160. Ritrievi, K. E., Longwell, J. P. and Sarofim, A. F., Combust. Flame 70, 17-31 (1987).
161. Konstandopoulos, A. G., Gratz, L. D., Johnson, J. H., Bagley, S. T. and Leddy, D. G., Ceramic particulate traps for diesel emissions control. Effect of a manganese-copper fuel additive. SAE Trans. J. Eng. 97, 37-53 (1988).
162. McKee, D. W., Metal oxides as catalysts for the oxidation of graphite. Carbon 8, 623-635.
163. McKee, D. W., The catalyzed gasification reactions of carbon. In Chemistry and Physics of Carbon, Vol. 16, P. L. Walker Jr and P. A. Thrower, Eds, Marcel Dekker, New York.
164. Cotton, D. H., Friswell, N. J. and Jenkins, D. R., The suppression of soot emission from flames by metal additives. Combust. Flame, 17, 87-98 (1971).
165. Ahlstroem, A. F. and Odenbrand, C. U. I., Appl. Catal. 60, 143-156 (1990).
166. Ahlstroem, A. F. and Odenbrand, C. U. I., Appl. Catal. 60, 157-172 (1990).
167. Loewe, A. and Mendoza-Frohn, C., Appl. Catal. 66, L11-L16 (1990).
168. 2. Appl. Catal. B: Environ. 3, 319-333 (1994).
169. Ahlstroem, A. F. and Odenbrand, C. U. I., Carbon, 27, 475-483 (1989).
170. Aoki, H., Asano, A., Kurazono, K., Kobashi, K. and Sami, H., Numerical Simulation Model for the Regeneration Process of a Wall-Flow Monolith Diesel Particulate Filter. SAE paper 930364 (1993).
171. Pattas, K. N., Stamatelos, A. M., Kougianos, K. N., Koltsakis, G. C. and Pistikopoulos, P. K., Trap Protection by Limiting A/F during Regeneration. SAE paper 950366 (1995).
172. Higuchi, N., Mochida, S. and Kojima, M., Optimized Regeneration Conditions of Ceramic Honeycomb Diesel Filter. SAE paper 830078 (1983).
173. Stamatelos, A. M., On-line regeneration control for a diesel particulate trap system. Automatica, 30 (3), 513-520 (1994).
174. Pattas, K., Patsatzis, N., Michalopoulou, C., Stamatelos, A., Kikidis, P., Samaras, Z. and Sowul, H. SAE paper 880004 (1988).
175. Pattas, K., Samaras, Z., Kyriakis, N., Mihailidis, A. and Manikas, Th., Diesel Particulate Trap Protection Against Uncontrolled Regeneration via Selective Flow Modulation. SAE paper 960128 (1996).
176. Pattas, K. N., Stamatelos, A. M., Koltsakis, G. C., Kandylas, I. P. and Mustel, W., Computer aided engineering in the design of catalytically assisted trap systems, SAE Int. Congress, Detroit. SAE paper 970472 (1997).
177. Bissett, E. J. and Shadman, F., Thermal regeneration of diesel-particulate monolithic filters. AIChE J. 31 (5), 753 (1985).
178. Koltsakis, G. C. and Stamatelos, A. M., Modeling thermal regeneration of wall-flow diesel particulate traps. AIChE J. 42 (6), (1996).
179. Bissett, E. J., Mathematical modeling of the thermal regeneration of a wall-flow monolith diesel particulate filter. Chem. Engng Sci. 39 (7/8), 1233-1244 (1984).
180. Koltsakis, G. C. and Stamatelos, A. M., Modeling catalytic regeneration in wall flow particulate filters. Ind. Engng Chem. Res. 35, 2-13 (1996).
181. Koltsakis, G. C. and Stamatelos, A. M., Modes of catalytic regeneration in diesel particulate filters. Ind. Engng Chem. Res. (submitted).
182. Pauli, E., Lepperhoff, E. and Pischinger, F., The Calculation of Regeneration Limits of Diesel Particulate Traps for Different Regeneration Methods. SAE paper 840075 (1984).
183. Sachdev, R., Wong, V. and Shahed, S., Analysis of Regeneration Data for a Cellular Ceramic Particulate Trap. SAE paper 840076 (1984).
184. Peterson, R. C., The oxidation rate of diesel particulate which contains lead. SAE paper 870628 (1987).
185. Lepperhoff, G. and Kroon, G., Abgasnachbehandlung I - Verminderung der Partikelemission von Dieselmotoren fuer PKW durch Abgasnachbehandlung. Abschlussbericht, Vorhaben Nr. 259, Heft 352, FVV (1984).
186. Sorenson, S. C., Hoj, J. W. and Stobbe, P., Flow Characteristics of SiC Diesel Particulate Filter Materials. SAE paper 940236 (1994).
187. Heck, E., Mallog, J., Mueller, A. and Thoma, J., Motorkonzept mit Oxidationskatalysator. Motortechnische Zeitscrift 50, 3 (1989).
188. Miyoshi, N., Matsumoto, S., Katoh, K., Takahashi, N., Yokota, K., Sugiura, M. and Kasahara, K., Development of New Concept Three Way Catalyst for Automotive Lean Burn Engines. SAE papers 950809 (1995).
189. x Reduction in Net Oxidizing Atmosphere. SAE paper 920496 (1992).
190. Kintaichi, Y., Hamada, H., Tabata, M., Masato, M. and Ito, T., Selective reduction of nitrogen oxide with hydrocarbons over solid acid catalysts in oxygen rich atmosphere. Catal. Lett. 6, 239 (1990).
191. Inoui, T., Kojo, S., Shibata, M., Yoshida, T. and Iwamoto, S., NO decomposition on Cu incorporated A zeolites under the reaction of excess oxygen with a small amount of hydrocarbons, in Studies in Surface Science and Catalysis 69, pp. 355-364, Elsevier, Amsterdam (1991).
192. Takami, A., Takemoto, T., Iwakuni, H., Saito, F. and Komatsu, K., Development of Lean Burn Catalyst. SAE paper 950746 (1995).