Computer-aided tissue engineering in whole bone replacement treatment

American Society of Mechanical Engineers, Manufacturing Engineering Division, MED

Volumn 16-1, Issue , 2005, Pages 197-206

  Wettergreen, M ^a   Sun, W ^b   Bucklen, B ^a   Liebschner, M A K ^a  

^a Rice University   (United States)

^b Drexel University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BONE REPLACEMENT TREATMENT; COMPUTER AIDED TISSUE ENGINEERING (CATE); ORTHOPAEDIC BIOMECHANICS; VOXEL FINITE ELEMENT MODELS;

BIOMECHANICS; BONE; COMPUTER AIDED DESIGN; OPTIMIZATION; PROBLEM SOLVING; TISSUE CULTURE;

COMPUTER AIDED ENGINEERING;

EID: 33646012291     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE2005-82000     Document Type: Conference Paper

References (60)

1. Riggs, B.L. and L.J. Melton, 3rd, The worldwide problem of osteoporosis: insights afforded by epidemiology. Bone, 1995. 17(5 Suppl): p. 505S-511S.
2. Dean, D., K.J. Min, and A. Bond, Computer Aided Design of Large-Format Prefabricated Cranial Plates. J Craniofac Surg, 2003. 14(6): p. 819-832.
3. Winder, J., R.S. Cooke, J. Gray, T. Fannin, and T. Fegan, Medical rapid prototyping and 3D CT in the manufacture of custom made cranial titanium plates. J Med Eng Technol, 1999. 23(1): p. 26-8.
4. Kai, C.C., Three-dimensional rapid prototyping technologies and key development areas. Computing & Control Engineering Journal, 1994. 5(4): p. 200-206.
5. Davis, J., Till Death Do Us Part, in Wired. 2003. p. 110-120.
6. Jacobs, C.R., B.R. Davis, C.J. Rieger, J.J. Francis, M. Saad, and D.P. Fyhrie, NACOB presentation to ASB Young Scientist Award: Postdoctoral. The impact of boundary conditions and mesh size on the accuracy of cancellous bone tissue modulus determination using large-scale finite-element modeling. North American Congress on Biomechanics. J Biomech, 1999. 32(11): p. 1159-64.
7. Winslow, R.L. and M.S. Boguski, Genome informatics: current status and future prospects. Circ Res, 2003. 92(9): p. 953-61.
8. Sun W, S., B., Darling A., Gomez C., Computer Aided Tissue Engineering Part I: Overview, Scope and Challenges. Journal of Biotechnology and Applied Biochemistry, 2003.
9. Borah, B., G.J. Gross, T.E. Dufresne, T.S. Smith, M.D. Cockman, P.A. Chmielewski, M.W. Lundy, J.R. Hartke, and E.W. Sod, Three-dimensional microimaging (MRmicroI and microCT), finite element modeling, and rapid prototyping provide unique insights into bone architecture in osteoporosis. Anat Rec, 2001. 265(2): p. 101-10.
10. Kai, C., Three-dimensional rapid prototyping technologies and key development areas. Computing and Control Engineering Journal, 1994: p. 200-206.
11. Davidson, E.T., J.G. Evans, and Y.D. Coble, Jr., Bone mineral density testing by DEXA. J Fla Med Assoc, 1996. 83(8): p. 567-8.
12. Jones, L.M., A. Goulding, and D.F. Gerrard, DEXA: a practical and accurate tool to demonstrate total and regional bone loss, lean tissue loss and fat mass gain in paraplegia. Spinal Cord, 1998. 36(9): p. 637-40.
13. Markel, M.D., M.A. Wikenheiser, R.L. Morin, D.G. Lewallen, and E.Y. Chao, Quantification of bone healing. Comparison of QCT, SPA, MRI, and DEXA in dog osteotomies. Acta Orthop Scand, 1990. 61(6): p. 487-98.
14. Ito, M., K. Hayashi, M. Uetani, Y. Kawahara, M. Ohki, M. Yamada, H. Kitamori, and M. Noguchi, Bone mineral and other bone components in vertebrae evaluated by QCT and MRI. Skeletal Radiol, 1993. 22(2): p. 109-13.
15. Webb, P.A., A review of rapid prototyping (RP) techniques in the medical and biomedical sector. J Med Eng Technol, 2000. 24(4): p. 149-53.
16. Prins, S.H., H.L. Jorgensen, L.V. Jorgensen, and C. Hassager, The role of quantitative ultrasound in the assessment of bone: a review. Clin Physiol, 1998. 18(1): p. 3-17.
17. Mayo, J.R., J. Aldrich, and N.L. Muller, Radiation exposure at chest CT: a statement of the Fleischner Society. Radiology, 2003. 228(1): p. 15-21.
18. Wiest, P.W., J.A. Locken, P.M. Heintz, and F.A. Mettler, Jr., CT scanning: a major source of radiation exposure. Semin Ultrasound CT MR, 2002. 23(5): p. 402-10.
19. Brody, A.S., CT scanner design and patient radiation exposure. Pediatr Radiol, 2002. 32(4): p. 268-71.
20. Kusnoto, B. and C. A. Evans, Reliability of a 3D surface laser scanner for orthodontic applications. Am J Orthod Dentofacial Orthop, 2002. 122(4): p. 342-8.
21. Kopperdahl, D.L., E.F. Morgan, and T.M. Keaveny, Quantitative computed tomography estimates of the mechanical properties of human vertebral trabecular bone. J Orthop Res, 2002. 20(4): p. 801-5.
22. Ulrich, D., B. van Rietbergen, A. Laib, and P. Ruegsegger, The ability of three-dimensional structural indices to reflect mechanical aspects of trabecular bone. Bone, 1999. 25(1): p. 55-60.
23. Gordon, R., R. Bender, and G.T. Herman, Algebraic reconstruction techniques (ART) for three-dimensional electron microscopy and x-ray photography. J Theor Biol, 1970. 29(3): p. 471-81.
24. Guan, H., M.W. Gaber, F.A. DiBianca, and Y. Zhu, CT reconstruction by using the MLS-ART technique and the KCD imaging system - I: low-energy X-ray studies. IEEE Trans Med Imaging, 1999. 18(4): p. 355-8.
25. Templeton AK, C.D., Liebschner MAK, Updating a 3-D Vertebral Body Finite Element Model Using 2-D Images. Medical Engineering Physics (Submitted), 2003.
26. Feinberg, S.E., S.J. Hollister, J.W. Halloran, T.M. Chu, and P.H. Krebsbach, Image-based biomimetic approach to reconstruction of the temporomandibular joint. Cells Tissues Organs, 2001. 169(3): p. 309-21.
27. Sun W and L. P, Recent development on computer aided tissue engineering - a review. Comput Methods Programs Biomed, 2002. 67(2): p. 85-103.
28. Hollister, S.J., R.D. Maddox, and J.M. Taboas, Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. Biomaterials, 2002. 23(20): p. 4095-103.
29. Wettergreen MA, L.M. Scaffold Optimization for Load Bearing Applications. in Southern Biomedical Engineering Conference. 2002. Washington, DC: Medical and Engineering Publishers.
30. Gibson LJ, A.M., Cellular Solids: Structure and Properties. 1988, Elmsford, New York 10523, USA: Pergamon Press.
31. Starly B, L.W., Fang Z, Sun W. "Biomimetic" Model For Heterogeneous Bone Scaffold, in Southern Biomedical Engineering Conference. 2002. Washington, DC: Medical and Engineering Publishers.
32. Keller, T.S., T.H. Hansson, A.C. Abram, D.M. Spengler, and M.M. Panjabi, Regional variations in the compressive properties of lumbar vertebral trabeculae. Effects of disc degeneration. Spine, 1989. 14(9): p. 1012-9.
33. Adachi, T., K. Tsubota, Y. Tomita, and S.J. Hollister, Trabecular surface remodeling simulation for cancellous bone using microstructural voxel finite element models. J Biomech Eng, 2001. 123(5): p. 403-9.
34. Ruimerman, R., B. Van Rietbergen, P. Hilbers, and R. Huiskes, A 3-dimensional computer model to simulate trabecular bone metabolism. Biorheology, 2003. 40(1-3): p. 315-20.
35. Toffoli T, Cellular Automata, in The Handbook of Brain Theory and Neural Networks, A. M, Editor. 1995, The MIT Press: Cambridge, Massachusetts, p. 166-169.
36. McCubbrey, D.A., D.D. Cody, E.L. Peterson, J.L. Kuhn, M.J. Flynn, and S.A. Goldstein, Static and fatigue failure properties of thoracic and lumbar vertebral bodies and their relation to regional density. J Biomech, 1995. 28(8): p. 891-9.
37. Sun W, S., B., Darling A., Gomez C., Computer Aided Tissue Engineering Part II: Application to biomimetic modeling and design of tissues. Journal of Biotechnology and Applied Biochemistry, 2003.
38. Asano, S., K. Kaneda, S. Umehara, and S. Tadano, The mechanical properties of the human L4-5 functional spinal unit during cyclic loading. The structural effects of the posterior elements. Spine, 1992. 17(11): p. 1343-52.
39. Yang, K.H. and A.I. King, Mechanism of facet load transmission as a hypothesis for low-back pain. Spine, 1984. 9(6): p. 557-65.
40. Jee, W.S.S., Integrated Bone Tissue Physiology: Anatomy and Physiology, in Bone Mechanics Handbook, S.C. Cowin, Editor. 2001, CRC Press: New York. p. 1-1 - 1-68.
41. Yang, S., K.F. Leong, Z. Du, and C.K. Chua, The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques. Tissue Eng, 2002. 8(1): p. 1-11.
42. Cooke MN, F.J., Dean D, Rimnac C, Mikos AG, Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth. J Biomed Mater Res, 2003. 64B(2): p. 65-69.
43. Landers, R., U. Hubner, R. Schmelzeisen, and R. Mulhaupt, Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering. Biomaterials, 2002. 23(23): p. 4437-47.
44. Warren, W.L. Enabling Tools for Computer Aided Tissue Engineering, in Advances in Tissue Engineering. 2003. Houston, TX.
45. Mironov, V., T. Boland, T. Trusk, G. Forgacs, and R.R. Markwald, Organ printing: computer-aided jet-based 3D tissue engineering. Trends Biotechnol, 2003. 21(4): p. 157-61.
46. Taboas, J.M., R.D. Maddox, P.M. Krebsbach, and S.J. Hollister, Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds. Biomaterials, 2003. 24(1): p. 181-94.
47. Liebschner, M.A.K., K. Sun, and M.A. Wettergreen, Conceptual Analysis of a Novel Bone Anchor System. Journal of Biomechanics, Submitted August 2003.
48. Wettergreen MA, M.A., Liebschner MAK. Design of a Three-Dimensional Composite Scaffold with Varied Engineered Micro-Architecture. in Groupe de Recherche Interdisciplinaire sur les Biomateriaux Osteoarticulaires Injectables. 2003. Baltimore, MD.
49. Prendergast, P.J., Bone Prostheses and Implants, in Bone Biomechanics Handbook, S.C. Cowin, Editor. 2001, CRC Press: New York. p. 35-1 - 35-29.
50. Kotani, Y., B.W. Cunningham, A. Cappuccino, K. Kaneda, and P.C. McAfee, The effects of spinal fixation and destabilization on the biomechanical and histologic properties of spinal ligaments. An in vivo study. Spine, 1998. 23(6): p. 672-82; discussion 682-3.
51. Chu, K.T., Y. Oshida, E.B. Hancock, M.J. Kowolik, T. Barco, and S.L. Zunt, Hydroxyapatite/PMMA composites as bone cements. Biomed Mater Eng, 2004. 14(1): p. 87-105.
52. Soffer, E., J.P. Ouhayoun, and F. Anagnostou, Fibrin sealants and platelet preparations in bone and periodontal healing. Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 2003. 95(5): p. 521-8.
53. Ono, K., J. Shikata, K. Shimizu, and T. Yamamuro, Bone-fibrin mixture in spinal surgery. Clin Orthop, 1992(275): p. 133-9.
54. Larsson, C., P. Thomsen, B.O. Aronsson, M. Rodahl, J. Lausmaa, B. Kasemo, and L.E. Ericson, Bone response to surface-modified titanium implants: studies on the early tissue response to machined and electropolished implants with different oxide thicknesses. Biomaterials, 1996. 17(6): p. 605-16.
55. Hutmacher, D.W., Scaffold deisng and fabrication technologies for engineering tissues - state of the art and future perspectives. J Biomater Sci Polym Ed, 2001. 12(1): p. 107-124.
56. Tan, K.H., C.K. Chua, K.F. Leong, C.M. Cheah, P. Cheang, M.S. Abu Bakar, and S.W. Cha, Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends. Biomaterials, 2003. 24(18): p. 3115-23.
57. Fisher, J.P., T.A. Holland, D. Dean, P.S. Engel, and A.G Mikos, Synthesis and properties of photocross-linked poly(propylene fumarate) scaffolds. J Biomater Sci Polym Ed, 2001. 12(6): p. 673-87.
58. Liebschner, M.A. and M.A. Wettergreen. Scaffold Optimization for Load Bearing Applications. in Southern Biomedical Engineering Conference. 2002. Bethesda, MD: Medical and Engineering Publishers.
59. Therics, Inc. - Tissue Engineering and Orthopaedic Products. 2003.
60. Sciperio Inc., A Science Revelation! 2003.