Material strengthening mechanisms and their contribution to size effect in micro-cutting

American Society of Mechanical Engineers, Manufacturing Engineering Division, MED

Volumn 16-2, Issue , 2005, Pages 1147-1156

  Liu, Kai ^a   Subbiah, Sathyan ^a   Melkote, Shreyes N ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Adaptive remeshing; Finite element; Micro cutting; Size effect; Strain gradient

Indexed keywords

MATERIAL STRENGTHENING; MICRO-CUTTING; SECONDARY DEFORMATION ZONE; SPECIFIC CUTTING ENERGY;

ALUMINUM; COMPUTER SIMULATION; DEFORMATION; FINITE ELEMENT METHOD; STRAIN; STRENGTH OF MATERIALS;

METAL CUTTING;

EID: 33645997003     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE2005-81477     Document Type: Conference Paper

References (38)

1. M. C. Shaw, 1950, "A quantized theory of strain hardening as applied to the cutting of metals", J. of App. Phys, 21, pp. 599-606.
2. W. R. Backer, E. R. Marshall, and M. C. Shaw, 1952, "The size effect in metal cutting", Trans. of ASME, pp. 74-61.
3. E. M. Kopalinsky and P.L.B. Oxley, 1984, "Size effects in metal removal processes", Institute of Physics Conference Series, n70, 1984, pp 389-396.
4. T.D. Marusich, 2001, "Effects of friction and cutting speed on cutting force", Proc. IMECE (ASME), Nov. 11-16, New York., Paper#: MED-23313
5. J.Larsen-Basse and P.L.B. Oxley, 1973, "Effect of strain rate sensitivity on scale phenomena in chip formation", Proceedings of the 13th International Machine Tool Design & Research Conference, University of Birmingham, pp. 209-216
6. N. Fang, 2003, "Slip-line modeling of machining with a rounded-edge tool - part II: analysis of the size effect and shear strain-rate", J. Mech. Phys. Solids, 51, 743-762
7. W.D. Nix, 1989, "Mechanical properties of thin films", Metallurgical Transactions, 20A, pp. 2217-2245.
8. Q. Ma and D.R. Clarke, 1995, "Size dependent hardness of silver single crystals", J. Mater. Res., 10, pp. 853-863.
9. N.A. Stelmashenko, M.G. Walls, L.M. Brown, Y.V. Milman, 1993, "Microindentation on W and Mo oriented single crystals: an STM study", Acta Metallurgica et Materialia, 41, pp. 2855-2865.
10. N.A. Fleck, G.M. Muller, M. F. Ashby and J.W. Hutchinson, 1994, "Strain gradient plasticity: theory and experiments", Acta Metallurgica et Materialia, 42(2), pp. 475-487.
11. J.S. Stolken, A.G. Evans, 1998, "A microbend test method for measuring the plasticity length scale", Metallurgica et Materialia, 46, No. 14, pp. 5109-5115.
12. D. Dinesh, S. Swaminathan, S. Chandrasekar, and T.N. Farris, 2001, "An intrinsic size-effect in machining due to the strain gradient", Proc. 2001 ASME IMECE, Nov. 11-16, NY, pp. 197-204.
13. S. S. Joshi and S. N. Melkote, 2004, "An Explanation for the size-effect in machining based on strain gradient plasticity", Journal of Manufacturing Science and Engineering, Transactions of the ASME, 126, n 4, pp. 679-684.
14. K. Liu and S.N. Melkote, 2004, "A strain gradient based finite element model for micro/meso-scale orthogonal cutting process", Proceedings of 2004 Japan-USA Symposium on Flexible Automation, Denver, Colorado, July, 2004.
15. K. Nakayama and K. Tamura, 1968, "Size effect in metal-cutting force", American Society of Mechanical Engineers, 61-Prod-9, 1967, 8p
16. K.W. Kim, W.Y. Lee and H.C. Sin, 1999, "A finite element analysis of machining with the tool edge considered", J. of Mat. Proc. Tech., 86, pp. 45-55.
17. D. A. Lucca, R.L. Rhorer, and R. Komanduri, 1993, "Effect of tool edge geometry on energy dissipation in ultraprecision machining", Annals of the CIRP, 42(1), pp. 83-86.
18. E.J.A. Armarego and R.H. Brown, 1962, "On the size effect in metal cutting", International Journal of Production Research., 1, n3, pp. 75-99.
19. R. Komanduri, N. Chandrasekaran and L. M. Raff, 1998, "Effect of tool geometry in nanometric cutting: a molecular dynamics simulation approach", Wear, 219, pp. 84-97
20. A.G. Atkins, 2003, "Modelling metal cutting using modern ductile fracture mechanics: quantitative explanations for some longstanding problems", Int. J. ofMech. Sci., 45, pp. 373-396.
21. H. Gao, Y. Huang, 2001, "Taylor-based nonlocal theory of plasticity", International Journal of Solids and Structures, 38, pp. 2615-2637.
22. N.A. Fleck and J.W. Hutchinson, 1993, "A phenomenological theory for strain gradient effects in plasticity", J. Mech. Phys. Solids, 41, pp. 1825-1857.
23. H. Gao, Y. Huang, W.D. Nix, and J.W. Hutchinson, 1999, "Mechanism-based strain gradient plasticity - I. Theory", J. Mech. Phys. Solids, 47. pp. 1239-1263.
24. A. Acharya and J.L. Bassani, 2000, "Lattice incompatibility and a gradient theory of crystal plasticity", J. Mech. Phys. Solids, 48, pp. 1565-1595.
25. N.N. Zorev, 1963, "Inter-relationship between shear processes occurring along tool face and shear plane in metal cutting", International Research in Production Engineering, pp. 42-49.
26. E. Usui and T. Shirakashi, 1982, "Mechanics of machining - from descriptive to predictive theory. In on the art of cutting metals-75 years later", ASME Publication FED 7, pp. 13-35.
27. A. J. Shih, S. Chandrasekar and H.T. Yang, 1990, "Finite element simulation of metal cutting process with strain-rate and temperatures effects", Fundamental Issues in Machining, ASME, PED 43, pp. 11-24.
28. S. Bhattacharya and M.R. Lovell, 2000, "Characterization of friction in machining: evaluation of asperity deformation and seizure-based models", Transactions of NAMRI/SME, XXVII, pp. 107-112.
29. M.R. Lovell, S. Bhattacharya and R. Zeng, 1998, "Modeling orthogonal machining for variable tool-chip interfacial friction using explicit dynamic finite element methods", Proceedings of the CIRP International Workshop on Modeling of Machining Operations, pp. 265-276.
30. Z. Tao and M.R. Lovell, 2002, "Towards an improved friction model in material removal processes: Investigating the role of temperature", Technical paper - SME, MR02-188, pp. 1-8.
31. V. Madhavan, S. Chandrasekar and T.N. Farris, 2000, "Machining as a wedge indentation", Journal of Applied Mechanics, Transactions of the ASME, 67, pp. 128-139.
32. E. Ceretti, P. Fallbohmer, W.T. Wu and T. Allan, 1996, "Application of 2D FEM to chip formation in orthogonal cutting", Journal of Materials Processing Technology, 59, pp. 169-180.
33. V.Hamel, J.M. Roelandt, J. N. Gacel and F. Schmit, 2000, "Finite element modeling of clinch forming with automatic remeshing", Computers and Structures, 77, pp. 185-200.
34. N. Fang, 2003, "Sensitivity analysis of the material flow stress in machining", American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, 14, 2003. p 23-32.
35. A.H. Clausen, T. Borvik, O.S. Hopperstad and A. Benallal, 2004. "Flow and fracture characteristic of aluminum alloy AA5083-H116 as function of strain rate, temperature and triaxiality", Materials Science and Engineering, A364, pp. 260-272.
36. T. Allan and F.W. Bougler, 1973, "Flow stress of metals and ils applicalion in melal forming analyses", American Society of Mechanical Engineers, n 73-Prod-4, 1973, 11p
37. P.L.B. Oxley, 1989, "Mechanics of machining, An analylical approach lo assessing machinabilily", Ellis Horwood Lid, Chichesler
38. M. Zhou and M.P. Clode, 1998, "Conslitutive equations for modeling flow softening due to dynamic recovery and heat generation during plastic deformation", Mechanics of Materials, 27, pp. 63-76.