Sensitivity analysis of the material flow stress in machining

American Society of Mechanical Engineers, Manufacturing Engineering Division, MED

Volumn 14, Issue , 2003, Pages 23-32

  Fang, Ning ^a  

^a Utah State University   (United States)

Author keywords

Material flow stress; Sensitivity analysis; Strain; Strain rate; Temperature

Indexed keywords

ALUMINUM ALLOYS; CARBON STEEL; COMPRESSION TESTING; DEFORMATION; HEAT TREATMENT; PLASTIC FLOW; SENSITIVITY ANALYSIS; STRAIN HARDENING; STRAIN RATE;

MATERIAL FLOW STRESS; METAL DEFORMATION PROCESS;

MACHINING;

EID: 1842538737     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE2003-41655     Document Type: Conference Paper

References (44)

1. Fang, N., 2003, "Slip-Line Modeling of Machining with a Rounded-Edge Tool, Part I: New Model and Theory," Journal of the Mechanics and Physics of Solids, 51, pp. 715-742.
2. Fang, N., 2003, "Slip-Line Modeling of Machining with a Rounded-Edge Tool, Part II: Analysis of the Size Effect and the Shear Strain-Rate," Journal of the Mechanics and Physics of Solids, 51, pp. 743-762.
3. Fang, N., and Jawahir, I. S., 2002, "An Analytical Predictive Model and Experimental Validation for Machining with Grooved Tools Incorporating the Effects of Strains, Strain-Rates, and Temperatures," Annals of the CIRP, 51, pp. 83-86.
4. Fang, N., Jawahir, I. S., and Oxley, P. L. B., 2001, "A Universal Slip-Line Model with Non-Unique Solutions for Machining with Curled Chip Formation and a Restricted Contact Tool," International Journal of Mechanical Sciences, 43, pp. 557-580.
5. Stevenson, R., 1997, "Study on the Correlation of Workpiece Mechanical Properties from Compression and Cutting Tests," Machining Science and Technology, 1, pp. 67-79.
6. Stephensen, D. A., 1989, "Material Characterization for Metal-Cutting Modeling," ASME Journal of Engineering Materials and Technology, 111, pp. 210-219.
7. Zhang, H., Dillon, O. W. Jr., and Jawahir, I. S., 2001, "A Finite Element Analysis of 2-D Machining with a Grooved Tool", Transactions of the NAMRC, XXIX, pp. 327-334.
8. Liu, C. R., and Guo, Y. B., 2000, "Finite Element Analysis of the Effect of Sequential Cuts and Tool-Chip Friction on Residual Stresses in a Machined Layer," International Journal of Mechanical Sciences, 42, pp. 1069-1086.
9. Ozel, T., and Taylan, A., 2000, "Determination of Workpiece Flow Stress and Friction at the Chip-Tool Contact for High Speed Cutting," International Journal of Machine Tools and Manufacture, 40, pp. 133-152.
10. Lei, S., Shin, Y. C., and Incropera, F. P., 1999, "Material Constitutive Modeling Under High Strain Rates and Temperatures Through Orthogonal Machining Tests," ASME Journal of Manufacturing Science and Engineering, 121, pp. 577-585.
11. Strenkowski, J. S., and Athavale, S. M., 1997, "A Partially Constrained Eulerian Orthogonal Cutting Model for Chip Control Tool," ASME Journal of Manufacturing Science and Engineering, 119, pp. 681-688.
12. Shih, A. J., 1996, "Finite Element Analysis of the Rake Angle Effects on Orthogonal Metal Cutting," International Journal of Mechanical Sciences, 38, pp.1-17.
13. Wu, J. S., Dillon, O. W. Jr., and Lu, W. Y., 1996, "Thermo- Viscoplastic Modeling of Machining Process Using a Mixed Finite Element Method," ASME Journal of Manufacturing Science and Engineering, 118, pp.470-482.
14. van Luttervelt, C. A., Childs, T. H. C., Jawahir, I. S., Klocke, F., and Venuvinod, P. K., 1998, "Present Situation and Future Trends in Modeling of Machining Operations," Annals of the CIRP, 47, pp. 587-626.
15. Shirakashi, T., and Obikawa, T., 1998, "Recent Progress and Some Difficulties in Computational Modeling of Machining," Machining Science and Technology, 2, pp. 277-301.
16. Childs, T. H. C., 1997, "Material Property Requirements for Modeling Metal Machining," Journal de Physique IV, 7, pp. XXI-XXXVI.
17. Kececioglu, D., 1958, "Shear-Strain Rate in Metal Cutting and Its Effects on Shear-Flow Stress," Transactions of the ASME, 80, pp. 158-168.
18. Kececioglu, D., 1958, "Shear-Zone Temperature in Metal Cutting and Its Effects on Shear-Flow Stress," Transactions of the ASME, 80, pp. 541-546.
19. Kececioglu, D., 1960, "Shear-Zone Size, Compressive Stress, and Shear Strain in Metal-Cutting and Their Effects on Mean Shear-Flow Stress," ASME Journal of Engineering for Industry, 82, pp. 79-86.
20. Spaans, C., 1972, "A Treatise on the Streamlines and the Stress, Strain, and Strain Rate Distribution, and on Stability in the Primary Shear Zone in Metal Cutting," ASME Journal of Engineering for Industry, 94, pp. 690-696.
21. Murarka, P. D., Hinduja, S., and Barrow, G., 1981, "Influence of Strain, Strain-Rate and Temperature on the Flow Stress in the Primary Deformation Zone in Metal Cutting," International Journal of Machine Tool Design and Research, 21, pp. 207-216.
22. Saltelli, A., Chan, K., and Scott, E. M., 2000, Sensitivity Analysis, John Wiley & Sons Limited, Chichester, UK.
23. Leshock, C. E., Kim, J. N., and Shin, Y. C., 2001, "Plasma Enhanced Machining of Inconel 718: Modeling of Workpiece Temperature with Plasma Heating and Experimental Results," International Journal of Machine Tools and Manufacture, 41, pp. 877-897
24. Chan, C. L., and Chandra, A., 1991, "BEM Approach to Thermal Aspects of Machining Processes and Their Design Sensitivities," Applied Mathematical Modelling, 15, pp. 562-575.
25. Yacout, S. M., 1993, "Sensitivity and Parametric Bound Analysis for a Single Pass Machining Problem," European Journal of Operational Research, 63, pp. 351-361.
26. th International Symposium on Ballistics, Hague, The Netherlands, pp. 541-547.
27. Adibi-Sedeh, A. H., Madhavan, V., and Bahr, B., 2001, "Extension of Oxley's Analysis of Machining to Use the Johnson-Cook Material Model," Proceeding of 2001 ASME International Mechanical Engineering Congress and Exposition, New York, IMECE2001-MED-23320, pp. 1-10.
28. Jaspers, S. P. F. C., 1999, "Metal Cutting Mechanics and Material Behaviour," Ph.D. thesis, Technical University of Eindhoven, Eindhoven, The Netherlands.
29. Oxley, P. L. B., 1989, The Mechanics of Machining: An Analytical Approach to Assessing Machinability, Ellis Horwood Limited, Chichester, UK.
30. Zerilli, F. J., and Armstrong, R. W., 1987, "Dislocation-Mechanics- Based Constitutive Relations for Material Dynamics Calculations," Journal of Applied Physics, 61, pp. 1816-1825.
31. Maekawa, K., Shirakashi, T., and Usui, E., 1983, "Flow Stress of Low Carbon Steel at High Temperature and Strain Rate (Part 2) - Flow Stress Under Variable Temperature and Variable Strain Rate," Bulletin of the Japan Society of Precision Engineering, 17, pp. 167-172.
32. th Japan Congress on Testing Materials, pp. 72-76.
33. Macgregor, C. W., and Fisher, J. C., 1959, "A Velocity-Modified Temperature for the Plastic Flow of Metals," ASME Journal of Applied Mechanics, 13, pp. A11-A16.
34. Shaw, M. C., 1984, Metal Cutting Principles, Oxford University Press, Oxford, UK.
35. Drucker, D. C., 1949, "An Analysis of the Mechanics of Metal Cutting," Journal of Applied Physics, 20, pp. 1013-1021.
36. Shaw, M. C., 1950, "A Quantized Effect of Strain-Hardening as Applied to the Cutting of Metals," Journal of Applied Physics, 21, pp. 599-606.
37. Stevenson, M .G., and Oxley, P. L. B., 1970-1971, "An Experimental Investigation of the Influence of Strain-Rate and Temperature on the Flow Stress Properties of a Low Carbon Steel Using a Machining Test," Proceedings of the Institution of Mechanical Engineers, 185, pp. 741-754.
38. Friedman, J. H., 1991, "Multivariate Adaptive Regression Splines," Annals of Statistics, 19, pp. 1-67.
39. Friedman, J. H., 1991, "Rejoinder: Multivariate Adaptive Regression Splines," Annals of Statistics, 19, pp. 123-141.
40. http://www.salford-systems.com.
41. Ghouati, O., and Gelinz, J. C., 1998, "Sensitivity Analysis in Forming Processes," International Journal of Forming Processes, 1, pp. 297-322.
42. Antunez, H. J., and Kleiber, M., 1996, "Sensitivity Analysis for Metal Forming Processes Involving Frictional Contact in Steady State," Journal of Materials Processing Technology, 60, pp. 485-491.
43. Stevenson, R., 1999, "Material Properties as Indicators of Machining Behavior," Proceedings of the 1999 ASME International Mechanical Engineering Congress & Exposition, MED-10, pp. 197-203.
44. Stevenson, R., and Stephenson, D. A., 1995, "The Mechanical-Behavior of Zinc During Machining," ASME Journal of Engineering Materials and Technology, 117, pp. 172-178.