A survey of current models for simulating the contact between rough surfaces

Tribology Transactions

Volumn 42, Issue 3, 1999, Pages 581-591

  Liu, Geng ^a   Lin, Chih ^b  

^a Jane) Wang, Qian   (United States)

^b Hughes Christensen   (United States)

Author keywords

Asperity contact; Contact mechanics; Review

Indexed keywords

FRICTION; LUBRICATION; MATHEMATICAL MODELS; PRESSURE; TEMPERATURE;

ASPERITY CONTACT; CONTACT MECHANICS; CONTACT PRESSURE;

TRIBOLOGY;

ASPERITY; MODELING; ROUGHNESS; SURFACE CONTACT;

EID: 0033165692     PISSN: 10402004     EISSN: 1547397X     Source Type: Journal    
DOI: 10.1080/10402009908982257     Document Type: Article

References (101)

1. Johnson, K. L., Contact Mechanics. Cambridge University Press, (1985).
2. Greenwood, J. A. and Williamson, J. B. P., "Contact of Nominally Flat Surface," in Proc. Roy. Soc., A295. pp 300-319, (1966).
3. Greenwood, J. A. and Tripp, J. H., '"The Contact of Two Nominally Flat Rough Surfaces," in Proc. Instn. Mech. Engrs., 185, pp 48-71, (1971).
4. Whitehouse, D. J. and Archard, J. F., "The Properties of Random Surfaces of Significance in Their Contact," in Proc. Roy. Soc. Lond, A316, pp 97-121, (1970).
5. Onions, R. A. and Archard, J. F., "The Contact of Surfaces Having a Random Structure," Jour, of Phys. D, Appl. Phys., 6, pp 289-304, (1973).
6. Bush, A. W., Gibson, R. D. and Thomas, T. R., "The Elastic Contact of a Rough Surface." Wear, 35, pp 87-111, (1975).
7. Bush, A. W., Gibson, R. D. and Keogh, G. P., "Strongly Anisotropic Rough Surfaces," ASME Jour, of Lubr. Tech., 101, pp 15-20, (1979).
8. Thomas, T. R., Rough Surfaces, Longman, London, (1982).
9. McCool, J. I., "Comparison of Models for the Contact of Rough Surfaces." Wear, 107, pp 37-60, (1986).
10. Komvopoulos, K. and Choi, D. H., "Elastic Finite Element Analysis of Multi-Asperity Contacts," ASME Jour, of Trib., 114, pp 823-831, (1992).
11. Goryacheva, I., Sadeghi, F. and Nickel, D. A., "Internal Stresses in Contact of a Rough Body and a Viscoelastic Layered Semi-Infinite Plane," ASME Jour, of Trib., 118, pp 131-136,(1996).
12. Patir, N., "A Numerical Procedure for Random Generation of Rough Surfaces," Wear, 47, pp 263-277. (1978).
13. Lai, W. T. and Cheng, H. S., "Computer Simulation of Elastic Rough Contacts," Trib. Trans., 28, pp 172-180, (1985).
14. Ren, N. and Lee, S. C., "The Effects of Surface Roughness and Topography on Ihe Contact Behavior of Elastic Bodies," ASME Jour, of Trib., 116, pp 804-811, (1994).
15. Hu, Y. Z. and Tonder, K., "Simulation of 3-D Random Surface by 2-D Digital Filter and Fourier Analysis," Int'l. Jour. ofMach. Tool Manufact., 32, pp 82-90, (1992).
16. Tian, X. F. and Bhushan, B., "A Numerical Three-Dimensional Model for the Contact of Rough Surfaces by Variational Principle," ASME Jour, of Trib., 118, pp 33-42,(1996).
17. Yu, M. M. H. and Bhushan, B., "Contact Analysis of Three-Dimensional Rough Surfaces under Frictionless and Frictional Contact," Wear, 200, pp 265-280, (1996).
18. Myshkin, N. K., Petrokovets, M. I. and Chizhik, S. A., "Simulation of Real Contact in Tribology," Trib. Int'l, 31. pp 79-86. (1998).
19. Williamson, J. B. P., "The Microtopography of Surfaces," in Proc. Inst, Mech. Engrs., 182, 3k, pp 21-30, (1967/1968).
20. Bhushan, B. and Cook, N. H., "On the Correlation between Friction Coefficients and Adhesion Stresses," ASME Jour, of Eng. Materials and Tech., 97, pp 285-287. (1975).
21. Sayles, R. S. and Thomas, T. R., "Computer Simulation of the Contacting Rough Surfaces," Wear, 49, pp 273-296, (1978).
22. Webster, M. N. and Sayles, R. S., "A Numerical Model for the Elastic Frictionless Contact of Real Rough Surfaces," ASME Jour, of Trib., 108. pp 314-320.(1986).
23. Cole, S. J. and Sayles, R. S., "A Numerical Model for the Contact of Layered Elastic Bodies with Real Rough Surfaces," ASME Jour, of Trib., 114, pp 334-340, (1992).
24. Lee, S. C. and Cheng, H. S., "On the Relation of Load to Average Gap in the Contact Between Surfaces with Longitudinal Roughness," STLE Trib. Trans., 35, pp 523-529, (1992).
25. Mao, K., Sun, Y. and Bell, T., "A Numerical Model for the Dry Sliding Contaci of Layered Elastic Bodies with Rough Surfaces," STLE Trib. Trans., 39, pp 416-424. (1996).
26. Sui, P. C., "An Efficient Computation Model for Calculating Surface Contact Pressures Using Measured Surface Roughness," STLE Trib. Trans., 40, pp 243-250, (1997).
27. Bhushan, B., Wyant, J. C. and Meiling, J., "A New Three-Dimensional Non-Contact Digital Optical Profiler," Wear, 122, pp 301-312, (1988).
28. Kohno, T., Osawa, N., Miyamoto, K. and Mushas, T., "Practical Non-Contact Surface Measuring instrument with One Nanometric Resolution," in Proc. Eng., 7, pp 231-232,(1985).
29. Myshkin, N. K., Grigoryev, A. Y. and Kholodilov, O. V., "Quantitative Analysis of Surface Topography using Scanning Electron Microscopy," Wear, 153, pp 119-133,(1992).
30. Binning, G. and Rohrer, H., "Scanning Tunneling Microscopy," Physica. Acta, 55, pp 726-735, (1982).
31. Sarid, D., Scanning Force Microscopy, Oxford University Press, (1994).
32. Atomic Force Microscopy/Scanning Tunneling Microscopy, Cohen, S. H., Bray, M. T. and Lightbody, M. L., ed., Plenum Publication Corp., (1995).
33. Mandelbrot, B. B., The Fractal Geometry of Nature, Freeman, New York, (1983).
34. Majumdar, A. and Bhushan, B., "Role of Fractal Geometry in Roughness Characterization and Contact Mechanics of Surfaces." ASME Jour, of Trib., 112, pp 204-216, (1990).
35. Gaiiti, S. and Bhushan, B., o'Generalized Fraciol Analysis and Its Applications to Engineering Surfaces," Wear. 180. pp 17-34, (1995).
36. Majumdar, A. and Bhushan, B., ''Fractal Model of Elastic-Plastic Contact between Rough Surfaces," ASME Jour. of Trib., 113. pp 1-11, (1991).
37. Bhushan, B. and Mujumdar, A., "Elastic-Plastic Contact Model of Bi-fractal Surfaces." Wear, 153, pp 53-64. (1992).
38. Warren, T. L. and Krajcinovic, D., "Fractal Models of Elastic-Pcrfectly Plastic Contact of Rough Surfaces Based on the Cantor Set," Int'l. Jour. Solids Struct., 32. pp 2907-2922. (1995).
39. Warren, T. L. and Krujcinovic, D., "Random Cantor Set Models for the Elastic-Pcrfcctly Plastic Contact of Rough Surfaces." Wear, 196. pp 1-15, (1996)
40. Timoshenko, S. P. and Goodier, J. N., Theory of Elasticity. 3rd ed., McGraw-Hill. New York, (1970).
41. Francis, H. A., "The Accuracy of Plane Strain Models for the Elastic Contact of Three-Dimensional Rough Surfaces,"' Wear. 85. pp 239-256. (1983).
42. Ren, N. and lxc, S. C., "Contact Simulation of Three-Dimensional Rough Stirfnocs Using Moving Grid Method." ASME Jour, of Trib., 115. pp 597-601, (1993).
43. Lee, S. C. and Ren, N., "Behavior of Elastic-Plastic Rough Surface Contacts as A fleeted by Surface Topography, Load, and Material Hardness." Trib. Trans., 39. pp 67-74, (1996).
44. Leng, Y.S., Yang, G. P., Huang, Y. and Zheng, L. Q., "The Characteristics of Elustically Contacting Ideal Rough Surfaces," ASME Jour, of Trib . 118. pp 90-97,(1996).
45. Love, A. E. H. "The Stress Produced in a Semi-Infinite Solid by Pressure on Pan of the Boundary."Int’l. Trans. Hoy. Soc. (London). Series A., 228, pp 377-420, (1929).
46. Ju, Y and Furris, T. N., "Spccirul Analysis of TWo-Dimensional Contact Problems," ASME Jour, of Trib., 118. pp 320-328, (1996).
47. Ju, Y. and Zheng, L., "A Full Numerical Solution for the Elastic Contact of Three-Dimensional Real Rough Surfaces." Wear, 157. pp 151-161, (1992).
48. Stanley, H. M. and Kato, T. "An FFT-Based Method for Rough Surface Contact," ASME Jour, of Trib., 119, pp 481-485. (1997).
49. O'Sullivan, T. C. and King, R B., "Sliding Contact Stress Field Due to a Spherical Indenter on a Layered Elastic Half-Spacc," ASME Jour, of Trib., 110. pp 235-240, (1988).
50. Nogi, T. and Kato, T., "Influence of a Hard Surfacc Layer on ihc Limit of Elastic Contact-Pan I: Analysis Using a Real Surfacc Model," ASME Jour of Trib., 119. pp 493-500. (1997).
51. Hu, Y. Z., Barber, G. C. and Zhu, D., "Numerical Analysis for the Elastic Contact of Real Rough Surfaces," 1998 STLE Annual Meeting Preprint No. 98-NP-2D-I, STLE, Park Ridge, IL.(1998).
52. Sneddon, I. N., Fourier Transforms. McGraw-Hill. New York, (1951).
53. Gupta, P. K. and Wulowic, J. A., "Contact Stress Between an Elastic Cylinder and n Layered Elastic Solid." ASME Jour of Lubr. Tech., 96. pp 250-257, (1974).
54. Merriman, T. and Kanrvcl, J., "Analyses of the Role of Surface Roughness on Contact Stresses Between Elastic Cylinders With and Without Soft Surfacc Coaling." ASME Jour, of Trib., 111. pp 87-94. (1989).
55. Elsharkawy, A. A. and Hamrock, B. J., "A Numerical Solution for Dry Sliding Line Contact of Multilayered Elastic Bodies." ASME Jour, of Trib., 115. pp 237-245,(1993).
56. Kucharski, S., Klimezak, T., Polijaniuk, A. and Kaczmarek, J., "Finue-Element' Model for the Contact of Rough Surfaces," Wear. 177, pp 1-13, (1994).
57. Krul, E. R., Komvopoulos, K. and Ogy, D. B., "Elasiic-Plaslic Finite Element Analysis of Repealed Indentation of a Half-Spacc by a Rigid Sphere," ASME Jour. Appl. Mech., 60. pp 829-841. (1993).
58. Krul, E. R., Komvopoulos, K. and Ogy, D. B., "Finite Element Analysis of Repeated Indentation of an Elastic-Plastic Layered Medium by a Rigid Sphere." ASME Jour. Appl. Mech., 62. pp 20-42. (1995).
59. West, M. A. and Sayles, R. S., "A 3-Dimensional Melhod for Studying 3-Body Contact Geometry and Stress on Real Rough Surfaces," in Proc. 14th teeds Lyon Symp. on Trib, 12. pp 195-200. (1987).
60. Don, C. Y. and Sayles, R. S., "Numerical Contact Model of a Smooth Ball on Anisotropic Rough Surfaces." ASME Jour of Trib., 116, pp 194-201. (1994).
61. Suyles, R. S., "Basic Principles of Rough Surface Contact Analysis Using Numerical Methods." Trib. Inf I., 29. pp 639-650. (1996).
62. Ccitiry, T. F. and Scircg, A., "A Mathematical Programming Method for Design of Elastic Bodies in Contact," ASME Jour, of Applied Mechanics, 38. pp 387-392,(1971).
63. Kalker, J. J. and van Randen, Y., "A Minimum Principle for Frictionless Elastic Contact with Application to Non-Hertz an Halt'-Spuce Contact Problems." Jour, of Eng. Math., 6. pp 193-200, (1972).
64. Kulker, J. J., "Variational Principles in Conlact Elastoslatics," Jour. Inst. Math. Appl., 20. p 199. (1977).
65. Wolfe, P. "The Simplex Melhod for Quadratic Programming." Econometrica. 27. pp 382-395, (1959).
66. Varga, R. S., Matrix Iterative Analysis, Prentice-Hill. New York. (1962).
67. Bhushan, B., "Contact Mechanics of Rough Surfaces in Tribology: Multiple Asperiiy Contact," Trib. Letters, 4, pp 1-35. (1998).
68. Klarbring, A., "A Mathematical Programming Approach to Three-Dimensional Contact Problems with Friction." Comp. Meth. Appl. Mech. Eng., 58. pp 175-200, (1986).
69. Klarbnng, A. and Bjorkman, G., “The Treatment of Problems in Contact Mechanics by Mathematical Programming." Jour, of Theoretical and Applied Mechanics, 7, pp 83-86 (1988).
70. Klarbring, A. and Bjorkman, G., "A Mathematical Programming Approach to Contact Problems with Fnction and Varying Conlact Surfaces." Comp, and Struct., 30. pp 1185-1198. (1988).
71. Sviridcnok, A. I., Chihik, S. A. and Pctrokovets, M. I., Mechanics of Discrete Friction Conlact (in Russian). Nauka J technika. Minsk. (1990).
72. Zhu, D., Cheng, H. S., Arai, T. and Hamai, K., "A Numerical Analysis for Piston Skins in Mixed Lubrication-Pan I: Basic Modeling," ASME Jour of Trib . 114, pp 553-562, (1992).
73. Ai, X., Cheng, H. S., Hua, D., Moteki, K. and Aoyaina, S., "A Finite Element Analysis of Dynamically Loaded Journal Bearings in Mixed Lubrication," Trib. Trans., 41. pp 273-281.(1998).
74. Chang, W. R., Bogy, D. B. and Elsion, I., "Elastic-Plastic Model for the Conlact of Rough Surfacc." ASME Jour, of Trib., 109, pp 15-20. (1987).
75. Polonsky, I. A and Keer, L. M., "Scale Effects of Elastic-Plastic Behavior of Microscopic Asperiiy Contacts." ASMK 95-TRIH-27. ASME. New York, p 6
76. Ling, F. F. and Kennedy, F. E., "Contact and Surface Mechanics," 1990 ASME/STLE Trib Conf. Achievements in Tribology. ASME. New York, pp 129-149,(1990).
77. Bhushan, B., "Contact Mechanics of Rough Surfaces in Tribology: Single Asperity Contact." Appl. Mech. Rev., 49. pp 275-298. (1996).
78. Holmberg, K and Mathews, A., "Coatings Tribology: a Concept. Critical Aspects and Future Directions." Thin Solid Films. 253. pp 173-178, (1994).
79. Kuo, C. H. and Keer, L. M., "Contact Stress Analysis of a Layered Transversely Isotropic Half-Space." ASME Jour, of Trib., 114. pp 252-261, (1992).
80. Goryacheva, J. and Torskaya, E., "Stress Field Analysis in Multiple Loaded Coated Bodies," Friction and Wear, 15. pp 349-357, (1994).
81. Kennedy, F. E., Cullen, S. C. and Leroy, J M., "Contact Temperature and Its Effects in an Oscillatory Contact," ASM F. Jour, of Trib., 3, pp 63-69, (1989).
82. Tian, X. and Kennedy, F. E., "Temperature Rise at the Sliding Contact Interface for a Coated Semi-Infinite Body." ASME Jour, of Trib., 115, pp 1-9. (1993).
83. Varadi, K., Neder, Z. and Friedrich, K., "Evaluation of the Real Conlact Area, Pressure Disiributions and Contact Temperatures during Sliding Contact Between Real Metal Surfacc," Wear. 200, pp 55-62. (1996).
84. Ting, B. Y. and Winer, W. O., "Friciional-lnduced Thermal Influences in Elastic Conlact Between Spherical Asperities," ASME Jour, of Trib., 3. pp 315-322, (1989).
85. Wang, S. Komvopoulos, K., "A Fractal Theory of the Inierfacial Temperature Distribution in the Slow Sliding Regime: Pan I-Elastic Contact and Heat Transfer Analysis," ASMF. Jour, of Trib., 116. pp 812-823, (1994)
86. Wang, S. and Komvopoulos, K., "A Fractal Theory of the Inierfacial Temperature Distribution in the Slow Sliding Regime: Pan 2-Multiple Domains. Elasloplastic Contacts and Applications." ASME Jour of Trib., 116. pp 824-832. (1994).
87. Guha, D. and Chowdhun, R.S.K., "The Effect of Surface Roughness on the Temperature at the Contact Between Sliding Bodies." Wear. 197. pp 63-73.
88. Du, S Q., Zagrodzki, P., Barber, J. R. and Hulbert, G. M., "Finite Element Analysis of Frictionally Excited 'lltermoclastic Instability," Jour, of Thermal Stresses. 20. pp 185-201. (1997).
89. Burton, R. A., "Thermal Information in Frictionally Heated Conlact." Wear. 59, pp 1-20. (1980).
90. Barber, J. R., 'Thermoelastic Distortion of ihc Half-Spacc," Jour, of Thermal Stresses. 10. pp 21-228, (1987).
91. Yeo, T. and Barber, J. R., "Finiie Element Analysis of Thermoelastic Contact Stability," ASME Jour, of Applied Mechanics. 61. pp 919-922, (1994).
92. Azarkhin, A., Barber, J. R. and Rolf, R. L., "Combined Thermal-Mechanical Effects in Fnctionul Sliding." Key Engineering Materials, 33. pp 135-160, (1989).
93. Slromberg, N., Johansson, L. and Klarbring, A., "Derivation and Analysis of Generalized Standard Model for Contact. Friction and Wear," Int'l. Jour. Solids Structures. 33. pp 1817-1836. (1996).
94. Andrews, K. T., Shillor, M., Wright, S. and Klarbring, A., "A Dynamic Thermoviscoelastic Contact Problem with Friction and Wear," Int'l. Jour. Eng. Sci., 35. pp 1291-1309,(1997).
95. Johansson, L, and Klarbring, A., "Thermoelasiic Frictional Contact Problems: Modelling. Finiie Element Approximation and Numerical Realization." Comp. Meth. Appl. Mech. Eng., 105. pp 181-210.(1993).
96. Ferrante, J. and Bozzolo, G., "Fundamentals of Tribology at the Atomic Level." Mat. Res. Soc. Symp. Proc., 140. pp 37-50. (1989).
97. Belak, J. and Stowers, I. F., "Molecular Dynamics Studies of Surfacc Indentation in Two Dimensions." Mat. Res. Sac. Symp. Proc., 193, pp 259-264, (1990).
98. Belak, J. and Stowers, I F., "The Indentation and Scraping of a Metal Surface: A Molecular Dynamics Study." Fundamentals of Friction: Macroscopic and Microscopic Process. Singer, I. L. and Pollock, H. M., eds., Kluwer Academic Publishers. Netherlands, pp 511-520. (1992).
99. Harrison, J. A., White, C. T., Colton, R. J. and Brenner, D. W., "Nanoscale Investigation of Indentation, Adhesion and Fracture of Diamond (III) Surfaces." Surface Science, 271. pp 57-67, (1992).
100. Harrison, J. A. and Brenner, D. W., "Atomic-Scale Simulation of Tribological and Related Phenomena," Handbook of Micro/Nanotribology, Bhushan, B., ed., CRC Press, New York, NY. pp 397-439, (1995).
101. Yan, W. and Komvopoulos, K., "Three-Dimensional Molecular Dynamics Analysis of Atomic-Scale Indentation." ASME 97-TRIB-35, ASME. New York, p 9, (1997).