Frequency in fretting wear of Co-28Cr-6Mo versus Ti-6AI-4V implant alloys

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 77, Issue 1, 2006, Pages 79-88

  Schaaff, Petra ^a   Dalmiglio, Matteo ^a   Holzwarth, Uwe ^a  

^a JOINT RESEARCH CENTRE   (Italy)

Author keywords

Cobalt chromium (alloys); Fretting; Metal ions; Micromotion; Titanium (alloys)

Indexed keywords

ARTIFICIAL ORGANS; COBALT ALLOYS; COMPUTER SIMULATION; FATIGUE OF MATERIALS; WEAR OF MATERIALS;

COBALT-CHROMIUM (ALLOYS); FRETTING; METAL IONS; MICROMOTION;

TITANIUM ALLOYS;

ALLOY; CHROMIUM; COBALT; TITANIUM; TRACER; BIOMATERIAL; RADIOISOTOPE; TITANIUM ALLOY (TIAL6V4); VITALLIUM;

ACCURACY; ARTICLE; DEVICE; FATIGUE; HIP PROSTHESIS; IMPLANT; JOINT PROSTHESIS; KNEE PROSTHESIS; MATERIAL STATE; PIEZOELECTRICITY; TECHNIQUE; ANIMAL; CHEMISTRY; EVALUATION; HARDNESS; HUMAN; INSTRUMENTATION; MATERIALS TESTING; MECHANICAL STRESS; METHODOLOGY; PROSTHESIS; PROSTHESIS FAILURE; SURFACE PROPERTY;

ANIMALS; BIOCOMPATIBLE MATERIALS; HARDNESS; HUMANS; JOINT PROSTHESIS; MATERIALS TESTING; PROSTHESIS DESIGN; PROSTHESIS FAILURE; RADIOISOTOPES; STRESS, MECHANICAL; SURFACE PROPERTIES; TITANIUM; VITALLIUM;

EID: 33645406070     PISSN: 00219304     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.30410     Document Type: Article

References (52)

1. Herberts P, Malchau H, Garellick G. The Swedish National Hip Arthroplasty Register, Annual Report 2003, Department of Orthopaedics, Sahlgrenska University Hospital, 2004.
2. Zuckermann JD, Cavallo RJ, Kummer FJ. A review of the use of modularity in total shoulder arthroplasty. In: Marlowe DE, Parr JE, Mayor MB, editors. Modularity in Orthopedic Implants, ASTM STP 1301. West Conshohocken: ASTM; 1997. p 5-18.
3. Kraay MJ, Goldberg CM, Brown SA, Merritt K. Retrieval analysis of Ti-6A1-4V Miller-Galante total knee replacements. In: Brown SA, Lemons JE, editors. Medical Applications of Titanium and Its Alloys: The Material and Biological Issues, ASTM STP 1272. West Conshohocken: ASTM; 1996. p 409-416.
4. Waterhouse RB. Fretting fatigue. Int Mater Rev 1992;37:77-97.
5. Hoeppner DW, Chandrasekaran V. Fretting in orthopaedic implants: A review. Wear 1994;173:189-197.
6. Clarke IC, Campell P, Kossovsky N. Debris-mediated osteolysis-A cascade phenomenon involving motion, wear, particulates, macrophage induction, and bone lysis. In: St. John KR, editor. Particulate Debris from Medical Implants: Mechanisms of Formation and Biological Consequences, ASTM STP 1144. Philadelphia: ASTM; 1992. p 7-26.
7. Jastry M, Smith E. Wear particles of total joint replacements and their role in periprosthetic osteolysis. Curr Opin Rheumatol 1992;4:204-209.
8. Evans EJ. Cell damage in vitro following direct contact with fine particles of titanium, titanium alloy and cobalt-chromemolybdenum alloy. Biomaterials 1994;15:713-717.
9. Urban RM, Jacobs JJ, Gilbert JL, Galante JO. Migration of corrosion products from modular hip prostheses. J Bone Joint Surg Am 1994;76A:1345-1359.
10. Gilbert JL, Buckley CA, Jacobs JJ. In vivo corrosion of modular hip prosthesis components in mixed and similar metal combinations. The effect of crevice, stress, motion and alloy coupling. J Biomed Mater Res Part B: Appl Biomater 1993;27:1533-1544.
11. Collier JP, Mayor MB, Williams IR, Surprenant VA, Surprenant HP. The tradeoffs associated with modular hip prostheses. Clin Orthop Relat Res 1995;311:91-101.
12. Bhambri SK, Gilbertson LN. Characterization and quantification of fretting particulates generated in ceramic/metal and metal/metal modular head/taper system. In: Kambic HE, Tokobori AT, Jr, editors. Biomaterials' Mechanical Properties. ASTM STP 1173. Philadelphia: ASTM; 1994. p 111-126.
13. Viceconti M, Ruggeri O, Toni A. Design-related fretting wear in modular neck hip prosthesis. J Biomed Mater Res 1996;30: 181-186.
14. Flemming CAC, Brown SA, Payer JH. Mechanical testing for fretting corrosion of modular total hip tapers. In: Kambic HE, Yokobori AT, Jr., editors. Biomaterials' Mechanical Properties. ASTM STP 1173. Philadelphia: ASTM; 1994. p 156-166.
15. Viceconti M, Baleami M, Squarzoni S, Toni A. Fretting wear in modular neck hip prosthesis. J Biomed Mater Res 1997;35:207-216.
16. Brown SA, Merritt K. Fretting corrosion in saline and serum. J Biomed Mater Res 1981;15:479-488.
17. Brown SA, Hughes PJ, Merritt K. In vitro studies of fretting corrosion of orthopaedic materials. J Orthop Res 1988;6:572-579.
18. Kawalec JS, Brown SA, Payer JH, Merritt K. Mixed-metal fretting corrosion of Ti6A14V and wrought cobalt alloy. J Biomed Mater Res 1995;29:867-873.
19. Cook SD, Gianoli GJ, Clemow AJT, Haddad RJ, Jr. Fretting corrosion in orthopaedic alloys. Biomater Med Dev Artif Organs 1983-84;11:281-292.
20. Kovacs P, Davidson JA, Daigle K. Correlation between the metal ion concentration and the fretting wear volume of orthopaedic implant metals. In: St. John KR, editor. Particulate Debris from Medical Implants: Mechanisms of Formation and Biological Consequences. ASTM STP 1144. Philadelphia: ASTM; 1992. p 160-176.
21. Maurer AM, Brown SA, Payer JH, Merritt K, Kawalec JS. Reduction of fretting corrosion of Ti-6A1-4V by various surface treatments. J Orthop Res 1993;11:865-873.
22. Hendry JA, Pilliar RM. The fretting corrosion resistance of PVD surface-modified orthopedic implant. J Biomed Mater Res 2001;58:156-166.
23. Scherge M, Pöhlmann K, Gervé A. Wear measurements using radionuclide-technique (RNT). Wear 2003;254:801-817.
24. Neumann W, Woelfli W, Heimgartner P, Streicher RM. Thin-layer activation of hip-joint prostheses for tribological tests. Nucl Instrum Methods Phys Res B 1990;50:57-61.
25. Fehsenfeld P, Eifrig C, Kubat R. Application of RNB for high sensitive wear diagnostics in medicine technique and industry. Nucl Phys A 2002;701:235c-239c.
26. Loges PG, Blatchley CC, Tobin EJ, Sioshansi P. Surface layer activation for measuring fretting wear. J Soc Tribol Lubric Eng 1992;48:151-154.
27. De Beats P, Strijckmans K. Thin layer activation for measuring fretting wear and material transfer in iron alloys. Tribol Inter 1996;29:307-312.
28. De Beats P, Strijckmans K. The quantification of microscopic wear amounts of steel surfaces with thin layer activation. Eur J Mech Eng 1996;41:67-74.
29. De Beats P, Kalacska G, Strijckmans. The influence of humidity on the fretting wear of steel surfaces using thin layer activation. Trans ASME J Tribol 1997;119:840-845.
30. ASTM F1875-98, Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface, 2004.
31. ISO 7206, Implants for Surgery-Partial and Total Hip Joint Prostheses, ISO; 2002.
32. ASTM F897-02, Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws; 1998.
33. Feng IM, Uhlig HH. Fretting corrosion of mild steel in air and in nitrogen. J Appl Mech 1954;21:395-400.
34. Vingsbo O, Söderberg S. On fretting maps. Wear 1988;126: 131-147.
35. Berthier Y, Vincent L, Godet M, Fretting fatigue and fretting wear. Tribol Int 1989;22:235-242.
36. Vincent L, Berthier Y, Godet M. Testing methods in fretting fatigue: A critical appraisal. In: Attia HM, Waterhouse RB, editors. Standardization of Fretting Fatigue Test Methods and Equipment. ASTM STP 1159. Philadelphia: ASTM; 1992. p 33-48.
37. Blanchard P, Colombie C, Pellerin V, Fayeulle S, Vincent L. Material effects in fretting wear: Application to iron, titanium, and aluminum alloys. Metall Trans A 1991;22:1535-1543.
38. Fayeulle S, Blanchard P, Vincent L. Fretting behavior of titanium alloys. Tribol Trans 1993;36:267-275.
39. Ramalho A, Celis JP. Fretting laboratory tests: Analysis of the mechanical response of test rigs. Tribol Lett 2003;14: 187-196.
40. Brown SA, Abera A, D'Onofrico M, Flemming C. Effects of neck extension, coverage, and frequency on the fretting corrosion of modular THR bore and cone interface. In: Marlowe DE, Parr JE, Mayor MB, editors. Modularity in Orthopaedic Implants. ASTM STP 1301. West Conshohocken: ASTM; 1997. p 189-198.
41. Endo K, Goto H, Nakamura T. Effects of cycle frequency on fretting fatigue life of carbon steel. Bull JSME 1969;12:1300-1308.
42. Toth L. The investigation of the steady stage of steel fretting. Wear 1972;20:277-286.
43. Söderberg S, Bryggman U, McCullough T. Frequency effects in fretting wear. Wear 1986;110:19-34.
44. Tritschler B, Forest B, Rieu J. Fretting corrosion of materials for orthopaedic implants: A study of a metal/polymer contact in an artificial physiological medium. Tribol Int 1999;32: 587-596.
45. Chu YH, Elias JJ, Duda GN, Frassica FJ, Chao EYS. Stress and micromotion in the taper lock joint of a modular segmental bone replacement prosthesis. J Biomech 2000;32:1175-1179.
46. Boyer HE, editor. Atlas of Fatigue Curves. Metals Park, OH: American Society for Metals; 1986. p 431.
47. Cortez R, Mall S, Calcaterra JR. Interaction of high-cycle and low-cycle fatigue on fretting behavior of Ti-6-4. In: Hoeppner DW, Chandrasekaran V, Elliott CB, editors. Fretting Fatigue: Current Technology and Practices. ASTM STP 1367. West Conshohocken: ASTM; 2000. p 183-198.
48. Ohmae N, Tsukizoe T. The effect of slip amplitude on fretting. Wear 1974;27:281-294.
49. Long M, Rack HJ. Titanium alloys in total joint replacement-a materials science perspective-Review. Biomaterials 1998;19: 1621-1639.
50. Thomann UI, Uggowitzer PJ. Wear-corrosion behavior of biocompatible austenitic stainless steel. Wear 2000;239:48-58.
51. Brown SA, Merritt K. Fretting corrosion of plates and screws: An in vitro test method. In: Fraker AC, Griffin CD, editors. Corrosion and Degradation of Implant Materials: Second Symposium, ASTM STP 859. Philadelphia: ASTM; 1985. p 105-116.
52. Khan MA, Williams RL, Williams DF. The corrosion behaviour of Ti-6A1-4V, Ti-6Al-7Nb and Ti-13Nb-13Zr in protein solutions. Biomaterials 1999;20:631-637.