Fretting wear in a modular neck hip prosthesis

Journal of Biomedical Materials Research

Volumn 35, Issue 2, 1997, Pages 207-216

  Viceconti, Marco ^a   Baleani, Massimiliano ^a   Squarzoni, Stefano ^b   Toni, Aldo ^a,c  

^a RIZZOLI ORTHOPAEDIC INSTITUTE   (Italy)

^b Natl Res Cncl c/o Rizzoli O

^c UNIVERSITY OF BOLOGNA   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

CYCLIC LOAD; FRETTING WEAR; MODULAR NECK HIP PROSTHESIS;

FRETTING CORROSION; JOINTS (ANATOMY); MATERIALS TESTING; SURFACE TREATMENT; WEAR OF MATERIALS;

HIP PROSTHESES;

ACETABULUM; AMPLITUDE MODULATION; ARTICLE; CORROSION; HIP PROSTHESIS; PROSTHESIOLOGY; PROSTHESIS MATERIAL; WEIGHT REDUCTION; WORKLOAD;

ALLOYS; CHROMIUM ALLOYS; FEMUR NECK; HIP PROSTHESIS; MICROSCOPY, ELECTRON, SCANNING; PROSTHESIS FAILURE; TITANIUM;

EID: 0031149357     PISSN: 00219304     EISSN: None     Source Type: Journal    
DOI: 10.1002/(SICI)1097-4636(199705)35:2<207::AID-JBM9>3.0.CO;2-R     Document Type: Article

References (33)

1. M. Viceconti, O. Ruggeri, A. Toni, and A. Giunti, "Design-related fretting wear in modular neck hip prosthesis," J. Biomed. Mater. Res., 30, 181-186 (1996).
2. M. T. Manley and P. Serekian, "Wear debris. An environmental issue in total joint replacement," Clin. Orthop., 298, 137-146 (1994).
3. J. D. Bobyn, M. Tanzer, J. J. Krygier, A. R. Dujovne, and C. E. Brooks, "Concerns with modularity in total hip arthroplasty," Clin. Orthop., 298, 27-36 (1994).
4. A. C. Fraker, A. W. Ruff, P. Sung, A. C. Van Orden, and K. M. Speck, "Surface preparation and corrosion behavior of titanium alloys for surgical implants," in Titanium Alloys in Surgical Implants, H. A. Luckey and F. Kubli (eds.), American Society for Testing and Materials, New York, 1983, pp. 206-219.
5. J. D. Bobyn, A. R. Dujovne, J. J. Krygier, and D. L. Young "Surface analysis of the taper junctions of retrieved and in vitro tested modular hip prostheses," in Biological, Material, and Mechanical Considerations of Joint Replacement, B. F. Morrey (ed.), Raven Press, New York, 1993, pp. 287-301.
6. J. L. Lower and H. C. Price, "Weight loss technique for measurement of wear of polimeric orthopedic implants," in Factors That Affect the Precision of Mechanical Tests, American Society for Testing and Materials, New York, 1989, pp. 233-239.
7. G. Bergmann, F. Graichen, and A. Rohlmann, "Hip joint loading during walking and running, measured in two patients," J. Biomech., 26, 969-990 (1993).
8. R. C. Bill, "Review of factors that influence fretting wear," in Materials Evaluation Under Fretting Conditions, ASTM STP 780, American Society for Testing and Materials, New York, 1982, pp. 165-182.
9. P. Blanchard, C. Colombie, V. Pellerin, S. Fayeulle, and L. Vincent, "Materials effects in fretting wear: Application to iron, titanium and alluminum alloy," Metallurg. Trans., 22A, 1535-1544 (1991).
10. U. W. Bischoff, M. A. Freeman, D. Smith, M. A. Tuke, and P.J. Gregson, "Wear induced by motion between bone and titanium or cobalt-chrome alloys," J. Bone J. Surg. Br. 76B, 713-716 (1994).
11. J. P. Collier, V. A. Surprenant, R. E. Jensen, M. B. Mayor, and H. P. Surprenant, "Corrosion between the components of modular femoral hip prostheses," J. Bone J. Surg. Br., 74B, 511-517 (1992).
12. K. Merritt, R. W. Margevicius, and S. A. Brown, "Storage and elimination of titanium, alluminum and vanadium salts, in vivo," J. Biomed. Mater. Res., 26, 1503-1515 (1992).
13. J. J. Jacobs, A. K. Skipor, J. Black, R. M. Urban, and J. O. Galante, "Release and excretion of metal in patients who have a total hip-replacement component made of titanium-base alloy," J. Bone J. Surg. Am., 73A, 1475-1486 (1991).
14. A. Pasqualino and E. Nesci, Anatomia Umana Fondamentale, Unione Tipografica Editrice Torinese, Torino, Italy, 1980, pp. 72-73.
15. C. P. Case, V. G. Langkamer, C. James, M. R. Palmer, A. J. Kemp, P. F. Heap, and L. Solomon, "Widespread dissemination of metal debris from implants," J. Bone J. Surg. Br., 76B, 701-712 (1994).
16. J. Black, H. Sherk, J. Bonini, W. R. Rostoker, F. Schajowicz, and J. O. Galante, "Metallosis associated with a stable titanium-alloy femoral component in total hip replacement. A case report," J. Bone J. Surg. Am., 72A, 126-130 (1990).
17. S. Nasser, P.A. Campbell, D. Kilgus, N. Kossovsky, and H. C. Amstutz, "Cementless total joint arthroplasty prostheses with titanium-alloy articular surfaces. A human retrieval analysis," Clin. Orthop., 261, 171-185 (1990).
18. H. J. Agins, N. W. Alcock, M. Bansal, E. A. Salvati, P. D. Wilson, P.M. Pellicci, and P. G. Bullough, "Metallic wear in failed titanium-alloy total hip replacements," J. Bone J. Surg. Am., 70A, 347-356 (1988).
19. K. J. Kim, H. E. Rubash, S. C. Wilson, J. A. D'Antonio, and E. J. McClain, "A histologic and biochemical comparison of the interface tissues in cementless and cemented hip prostheses," Clin. Orthop., 287, 142-152 (1993).
20. P. A. Lalor, P. A. Revell, A. B. Gray, S. Wright, G. T. Railton, and M. A. R. Freeman, "Sensitivity to titanium. A cause of implant failure?," J. Bone J. Surg. Br., 73B, 25-28 (1991).
21. H. G. Willert and M. Semlitsch, "Reactions of the articular capsule to wear products of artificial joint prostheses," J. Biomed. Mater. Res., 11, 157-164 (1977).
22. M. Jasty, C. Bragdon, W. Jiranek, H. Chandler, W. Maloney, and W. H. Harris, "Etiology of osteolysis around porous-coated cementless total hip arthroplasties," Clin. Orthop., 308, 111-126 (1994).
23. A. J. Unwin and P. J. Stiles, "Early failure of titanium alloy femoral components: A quantitative radiological analysis of osteolytic and granulomatous change," J. Roy. Soc. Med., 86, 460-463 (1993).
24. M. H. Huo, F. Betts, G. P. Bogumill, P. I. Kenmore, R. J. Hayek, and T. J. Martinelli, "Metallic wear debris in acetabular osteolysis in a mechanically stable cementless total hip replacement: Report of a case," Orthopedics., 16, 1277-1281 (1993).
25. A. V. Lombardi, Jr., T. H. Mallory, B. K. Vaughn, and P. Drouillard, "Aseptic loosening in total hip arthroplasty secondary to osteolysis induced by wear debris from titanium-alloy modular femoral heads," J. Bone J. Surg. Am., 71A, 1337-1342 (1989).
26. T. P. Schmalzried, M. Jasty, and W. H. Harris, "Periprosthetic bone loss in total hip arthroplasty. Polyethylene wear debris and the concept of the effective joint space," J. Bone J. Surg. Am., 74A, 849-863 (1992).
27. J. L. Gilbert, C. A. Buckley, and J. J. Jacobs, "In vivo corrosion of modular hip prosthesis components in mixed and similar metal combinations. The effect of crevice, stress, motion, and alloy coupling," J. Biomed. Mater. Res., 27, 1533-1544 (1993).
28. R. M. Urban, J. J. Jacobs, M. J. Tomlinson, J. Gavrilovic, and M. E. Andersen, "Migration of corrosion products from the modular head junction to the polyethylene bearing surface and interface membranes of hip prostheses," in Total Hip Revision Surgery, J. O. Galante, A. G. Rosenberg, and J. J. Callaghan (eds.), Raven Press, New York, 1995, pp. 61-71.
29. H. A. McKellop, A. Sarmiento, C. P. Schwinn, and E. Ebramzadeh, "In vivo wear of titanium-alloy hip prostheses," J. Bone J. Surg. Am., 72A, 512-517 (1990).
30. R. M. Urban, J. J. Jacobs, M. J. Tomlinson, J. Black, T. M. Turner, and J. O. Galante, "Particles of metal alloy and their corrosion products in the liver, spleen and paraaortic lymph nodes of patients with total hip replacement prostheses," Trans. 41st Ann. Orthop. Res. Soc., 40, 241 (1995).
31. V. G. Langkamer, C. P. Case, P. Heap, A. Taylor, C. Collins, M. Pearse, and L. Solomon, "Systemic distribution of wear debris after hip replacement: A cause for concern?" J. Bone J. Surg. Br., 74B, 831-839 (1992).
32. T. Rae, "The biological response to titanium and titanium-aluminum-vanadium alloy particles: Long-term animal studies," Biomaterials, 7, 37-40 (1986).
33. T. T. Glant, J. J. Jacobs, G. Molnar, A. S. Shanbhag, M. Valyon, and J. O. Galante, "Bone resorption activity of particulate-stimulated macrophages," J. Bone Miner. Res., 8, 1071-1079 (1993).