Failure mechanisms in superplastic AA083 materials

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 37, Issue 3, 2006, Pages 645-655

  Kulas, Mary Anne ^a   Green, W Paul ^b   Taleff, Eric M ^c   Krajewski, Paul E ^d   McNelley, Terry R ^e  

^a UNIVERSITY OF TEXAS AT AUSTIN   (United States)

^b BELL HELICOPTER TEXTRON INC   (United States)

^c The University of Texas at Austin   (United States)

^d GENERAL MOTORS CORPORATION   (United States)

^e NONE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM SHEET; CAVITATION; CORRELATION METHODS; DEFORMATION; FAILURE (MECHANICAL); GRAIN BOUNDARIES; MECHANISMS; STRAIN RATE; SUPERPLASTICITY; TENSILE TESTING;

ALUMINUM SHEET MATERIALS; DEFORMATION TRANSITIONS; FAILURE MECHANISMS; FLOW LOCALIZATION;

ALUMINUM ALLOYS;

EID: 33645110296     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-006-0036-8     Document Type: Article

References (42)

1. K. Osada and K. Shirkawa: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 41-49.
2. http://www.superform-aluminium.com/.
3. J.G. Schroth: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 9-20.
4. A. Ball and M.M. Hutchison: Met. Sci. J., 1969, vol. 3, pp. 1-7.
5. O.D. Sherby and J. Wadsworth: in Superplasticity in Aerospace, H.C. Heikkenen and T.R. McNelley, eds., TMS, Warrendale, PA, 1988, pp. 3-27.
6. H. Fukuyo, H.C. Tsai, T. Oyama, and O.D. Sherby: Iron Steel Inst. Jpn. Int., 1991, vol. 31, pp. 76-85.
7. T.G. Langdon: Mater. Sci. Eng., 1991, vol. A137, pp. 1-11.
8. J.S. Vetrano, C.A. Lavender, C.H. Hamilton, M.T. Smith, and S.M. Bruemmer: Scripta Metall., 1994, vol. 30, pp. 565-70.
9. R. Verma, P. Friedman, A. Ghosh, C. Kim, and S. Kim: J. Mater. Eng. Performance, 1995, vol. 4, pp. 543-50.
10. R. Verma, P. Friedman, A. Ghosh, S. Kim, and C. Kim: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1889-98.
11. T.G. Nieh, J. Wadsworth, and O.D. Sherby: Superplasticity in Metals and Ceramics, Cambridge University Press, Cambridge, United Kingdom, 1997, pp. 40-53.
12. Y. Takayama, S. Sasaki, T. Tozawa, H. Kato, H. Watanabe, and M. Kokubo: J. Jpn. Inst. Light Met., 1999, vol. 49, pp. 378-82.
13. D.H. Bae and A.K. Ghosh: Acta Mater., 2000, vol. 48, pp. 1207-24.
14. I.C. Hsiao and J.C. Huang: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1373-84.
15. R.M. Cleveland, A.K. Ghosh, and J.R. Bradley: Metall. Mater. Trans. A, 2003, vol. 351, pp. 228-36.
16. P.A. Friedman and W.B. Copple: in Hot Deformation of Aluminum Alloys III, Z. Jin, A. Beaudoin, T.A. Bieler, and B. Radhakrishnan, eds., TMS, Warrendale, PA, 2003, pp. 211-19.
17. M.-A. Kulas, P.E. Krajewski, T.R. McNelley, and E.M. Taleff: in Hot Deformation of Aluminum Alloys III, Z. Jin, A. Beaudoin, T. Bieler, and B. Radhakrishnan), eds., TMS, Warrendale, PA, 2003, pp. 499-507.
18. M.-A. Kulas, W.P. Green, E.C. Pettengill, P.E. Krajewski, and E.M. Taleff: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 127-38.
19. M.-A. Kulas, W.P. Green, E.M. Taleff, P.E. Krajewski, and T.R. McNelley: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1249-61.
20. E.M. Taleff, P.J. Nevland, and P.E. Krajewski: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1119-30.
21. E.M. Taleff: Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 85-94.
22. D.H. Bae and A.K. Ghosh: Acta Mater., 2002, vol. 50, pp. 511-23.
23. D.H. Bae and A.K. Ghosh: Acta Mater., 2002, vol. 50, pp. 993-1009.
24. D.H. Bae and A.K. Ghosh: Acta Mater., 2002, vol. 50, pp. 1011-29.
25. D.H. Bae, A.K. Ghosh, and J.R. Bradley: Metall. Mater. Trans. A, 2003, vol. 34, pp. 2449-63.
26. J.R. Bradley: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 109-18.
27. J.R. Bradley and J.E. Carsley: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 149-57.
28. M.A. Khaleel, H.M. Zbib, and E.A. Nyberg: Int. J. Plast., 2001, vol. 17, pp. 277-96.
29. D.H. Bae and A.K. Ghosh: Mater. Sci. Eng. A, 2002, vol. A322, pp. 233-40.
30. K. Oh-ishi, J.F. Boyden, and T.R. McNelley: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 119-26.
31. E.M. Taleff, D.R. Lesuer, and J. Wadsworth: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 343-52.
32. E.M. Taleff, W.-J. Kim, and O.D. Sherby: in Modeling the Mechanical Response of Structural Materials, E.M. Taleff and R.K. Mahidhara, TMS, Warrendale, PA, 1998, pp. 209-18.
33. E.M. Taleff and P.J. Nevland: JOM, 1999, vol. 51, pp. 34-36.
34. E.M. Taleff, T. Leon-Salamanca, R.A. Ketcham, R. Reyes, and W.D. Carlson: J. Mater. Res., 2000, vol. 15, pp. 76-84.
35. N.R. Harrison, S.G. Luckey, P.A. Friedman, and Z.C. Xia: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 301-09.
36. K. Murali, G.P. Montgomery, Jr., and J.G. Schroth: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, TMS, Warrendale, PA, 2004, pp. 311-21.
37. M.A. Burke and W.D. Nix: Acta Metall., 1975, vol. 23, pp. 793-98.
38. J.W. Hutchinson and H. Obrecht: Fracture, 1977, vol. 1, pp. 101-16.
39. S. Kim, M.P. Balogh, and R.A. Waldo: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 139-48.
40. J.J. Blandin, B. Hong, A. Varloteaux, M. Suery, and G. L'Esperance: Acta Mater., 1996, vol. 44, pp. 2317-26.
41. W.D. Cao, X.P. Lu, and H. Conrad: Acta Mater., 1996, vol. 44, pp. 697-706.
42. M.G. Zelin: Acta Mater., 1997, vol. 45, pp. 3533-42.