Deformation mechanisms in superplastic AA5083 materials

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 36, Issue 5, 2005, Pages 1249-1261

  Kulas, Mary Anne ^a   Green, W Paul ^b   Taleff, Eric M ^b   Krajewski, Paul E ^c   McNelley, Terry R ^d  

^a UNIVERSITY OF TEXAS AT AUSTIN   (United States)

^b The University of Texas at Austin   (United States)

^c GENERAL MOTORS CORPORATION   (United States)

^d NONE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

GRAIN BOUNDARIES; GRAIN SIZE AND SHAPE; METAL CASTINGS; OPTICAL MICROSCOPY; PLASTIC DEFORMATION; RECRYSTALLIZATION (METALLURGY); STRAIN; STRESS ANALYSIS; SUPERPLASTICITY; TRANSIENTS;

DEFORMATION MECHANISMS; GRAIN-BOUNDARY-SLIDING (GBS); QUICK-PLASTIC FORMING; SUPERPLASTIC AA5083 MATERIALS;

ALUMINUM ALLOYS;

EID: 21244461193     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-005-0217-x     Document Type: Conference Paper

References (66)

1. A. Kelkar, R. Roth, and J. Clark: JOM, 2001, vol. 53, pp. 28-32.
2. J.G. Schroth: in Advances in Superplasticity and Superplastic Forming, EM. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 9-20.
3. K. Osada and K. Shirkawa: in Advances in Superplasticity and Superplastic Forming. E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 41-49.
4. P.E. Krajewski: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 173-83.
5. O.D. Sherby and J. Wadsworth: Progr. Mater. Sci., 1989, vol. 33, pp. 169-221.
6. A. Ball and M.M. Hutchison: Met. Sci. J., 1969, vol. 3, pp. 1-7.
7. O.D. Sherby and J. Wadsworth: in Deformation, Processing, and Structure, G. Kraus, ed., ASM, Metals Park, OH, 1982, pp. 355-89.
8. T. G. Langdon: Metall. Trans. A, 1982, vol. 13A, pp. 689-701.
9. A. Arieli and A.K. Mukherjee: Metall. Trans. A, 1982, vol. 13A, pp. 717-32.
10. J.W. Edington: Metall. Trans. A, 1982, vol. 13A, pp. 703-15.
11. G.S. Murty and M.J. Koczak: Mater. Sci. Eng., 1987, vol. 96, pp. 117-24.
12. O.D. Sherby and J. Wadsworth: in Superplasticity in Aerospace, H.C. Heikkenen and T.R. McNelley, eds., TMS, Warrendale, PA, 1988, pp. 3-27.
13. H. Fukuyo, H.C. Tsai, T. Oyama, and O.D. Sherby: Iron Steel Inst. Jpn. Int., 1991, vol. 31, pp. 76-85.
14. T.G. Langdon: Mater. Sci. Eng., 1991, vol. A137, pp. 1-11.
15. T.G. Nieh, J. Wadsworth, and O.D. Sherby: Superplasticity in Metals and Ceramics, Cambridge University Press, Cambridge, United Kingdom, 1997, pp. 58-69.
16. J.S. Vetrano, C.A. Lavender, C.H. Hamilton, M.T. Smith, and S.M. Bruemmer: Scripta Metall., 1994, vol. 30, pp. 565-70.
17. Y. Takayama, S. Sasaki, T. Tozawa, H. Kato, H. Watanabe, and M. Kokubo: J. Jpn. Inst. Light Met., 1999, vol. 49, pp. 378-82.
18. D.H. Bae and A.K. Ghosh: Acta Mater., 2000, vol. 48, pp. 1207-24.
19. I.C. Hsiao and J.C. Huang: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1373-84.
20. R.M. Cleveland, A.K. Ghosh, and J.R. Bradley: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 228-36.
21. P.A. Friedman and W.B. Copple: in Hot Deformation of Aluminum Alloys III, Z. Jin, A. Beaudoin, T.A. Bieler, and B. Radhakrishnan, eds., TMS, Warrendale, PA, 2003, pp. 211-19.
22. C.F. Martin, J.J. Blandin, and L. Salvo: Mater. Sci. Eng., 2001, vol. 297, pp. 212-22.
23. M.-A. Kulas, P.E. Krajewski, T.R. McNelley, and E.M. Taleff: in Hot Deformation of Aluminum Alloys III, Z. Jin, A. Beaudoin, T. Bieler, and B. Radhakrishnan, eds., TMS, Warrendale, PA, 2003, pp. 499-507.
24. M.-A. Kulas, W.P. Green, B.C. Pettengill, P.E. Krajewski, and E.M. Taleff: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 127-38.
25. E.M. Taleff: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 85-94.
26. F.A. Mohamed and T.G. Langdon: Acta Metall., 1974, vol. 22, pp. 779-88.
27. F.A. Mohamed: Scripta Metall., 1978, vol. 12, pp. 99-102.
28. P. Yavari and T.G. Langdon: Acta Metall., 1982, vol. 30, pp. 2181-96.
29. P. Yavari, F.A. Mohamed, and T.G. Langdon: Acta Metall., 1981, vol. 29, pp. 1495-1507.
30. H.J. McQueen and M.E. Kassner: in Superplasticity in Aerospace II, T.R. McNelley and H.C. Heikkenen, eds., TMS, Warrendale, PA, 1990, pp. 189-206.
31. G.A. Henshall, M.E. Kassner, and H.J. McQueen: Metall. Trans. A, 1992, vol. 23A, pp. 881-89.
32. E.M. Taleff, D.R. Lesuer, and J. Wadsworth: Metall. Mater. Trans. A, 1996, vol. 27 A, pp. 343-52.
33. E.M. Taleff, G.A. Henshall, T.G. Nieh, D.R. Lesuer, and J. Wadsworth: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1081-91.
34. E.M. Taleff, P.J. Nevland, and P.E. Krajewski: Metall. Mater. Trans. A. 2001, vol. 32A, pp. 1119-30.
35. J. Wang, Z. Horita, M. Furukawa, M. Nemoto, N.K. Tsenev, R.Z. Valiev, Y. Ma, and T.G. Langdon: J. Mater. Res., 1993, vol. 8, pp. 2810-18.
36. K. Kannan, J.S. Vetrano, and C.H. Hamilton: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1947-57.
37. J.S. Vetrano, S.M. Bruemmer, L.M. Pawlowski, and I.M. Robertson: Mater. Sci. Eng., 1997, vol. A238, pp. 101-07.
38. J.S. Vetrano, J. Menager, H. Chuck, S.M. Bruemmer, Y. Ge, and C.H. Hamilton: in Superplasticity and Superplastic Forming, A.K. Ghosh and T.R. Bieler, eds., TMS, Warrendale, PA, 1998, pp. 89-98.
39. L.M. Dougherty, I.M. Robertson, and J.S. Vetrano: Mater. Res. Soc. Symp. Proc., 2000, vol. 601, pp. 25-30.
40. T. Aiura, N. Sugawara, and Y. Miura: Mater. Sci. Eng., 2000, vol. 280A, pp. 139-45.
41. J.S. Vetrano, C.A. Lavender, and S.M. Bruemmer: in Superplasticity and Superplastic Forming, A.K. Ghosh and T.R. Bieler, eds., TMS, Warrendale, PA, 1995, pp. 49-56.
42. J.S. Vetrano, C.H. Henager, and V.Y. Guertsman: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 225-32.
43. J.S. Vetrano, D.R. Baer, and R.H. Jones: in Automotive Alloys 11, S.K. Das, ed., TMS, Warrendale, PA, 1998, pp. 117-23.
44. D.O. Sprowls and R.H. Brown: in Fundamental Aspects of Stress Corrosion Cracking, NACE, Houston, TX, 1969, pp. 466-512.
45. ASTM. Standard Designation E 112-96, ASTM, West Conshohocken, PA, 1996.
46. W. Kösten Z. Metallkd., 1948, vol. 39, pp. 1-9.
47. P.K. Chaudhury and F.A. Mohamed: Acta Metall., 1988, vol. 36, pp. 1099-1110.
48. C.R. Barrett, A.J. Ardell, and O.D. Sherby: Trans. ASM, 1964, vol. 230, pp. 200-04.
49. R. Horiuchi and M. Otsuka: Trans. JIM, 1972, vol. 13, pp. 284-93.
50. K.L. Murty, F.A. Mohamed, and J.E. Dorn: Acta Metall., 1972, vol. 20, pp. 1009-18.
51. H. Oikawa, J. Kariya, and S. Karashima. Met. Sci., 1974, vol. 8, pp. 106-11.
52. H. Oikawa, N. Matsuno, and S. Karashima: Met. Sci., 1975, vol. 9, pp. 209-12.
53. J.W. Harrell: Master's Thesis, Naval Postgraduate School, Monterey, CA, 2001.
54. T.A. Maestas: Master's Thesis, Naval Postgraduate School, Monterey, CA, 2002.
55. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps, Pergamon Press Inc., New York, NY, 1982, pp. 1-19.
56. T.G. Nieh, J. Wadsworth, and O.D. Sherby: Superplasticity in Metals and Ceramics, Cambridge University Press, Cambridge, United Kingdom, 1997, pp. 40-53.
57. O.D. Sherby and P.M. Burke: Progr. Mater. Sci., 1968, vol. 13, pp. 325-90.
58. W.R. Cannon and O.D. Sherby: Metall. Trans. A, 1970, vol. 1, pp. 1030-32.
59. J. Weertman: J. Appl. Phys., 1957, vol. 28, pp. 1185-89.
60. J. Weertman: Trans. TMS-AIME, 1960, vol. 218, pp. 207-18.
61. W.L. James and D.M. Barnett: in Solute-Defect Interaction Theory and Experiment, S. Saimoto, G.R. Purdy, and G.V. Kidson, eds., Pergamon Press, Elmsford, NJ, 1986, pp. 136-42.
62. E.M. Taleff and J. Qiao: Modeling the Performance of Engineering Structural Materials 11, T. Srivatsan and D.R. Lesuer, eds., TMS, Warrendale, PA, 2001, pp. 3-12.
63. J. Lin and O.D. Sherby: Res. Mech., 1981, vol. 2, pp. 251-93.
64. M.J. Mills, J.C. Gibeling, and W.D. Nix: Acta Metall., 1985, vol. 33, pp. 1503-14.
65. E.M. Taleff, P.J. Nevland, and S.J. Yoon: in Deformation, Processing, and Properties of Structural Materials, E.M. Taleff, C.K. Syn, and D.R. Lesuer, eds., TMS, Warrendale, PA, 2000, pp. 373-84.
66. E.M. Taleff and J. Qiao: Light Metals 2001 - Métaux Légers, M. Sahoo and T. Lewis, eds., Canadian Institute of Mining, Metallurgy, and Petroleum, Montrai, 2001, pp. 77-88.