Effects of friction on the contact and deformation behavior in sliding asperity contacts

Tribology Transactions

Volumn 46, Issue 4, 2003, Pages 514-521

  Zhang, H ^a   Chang, L ^a   Webster, M N ^b   Jackson, A ^b  

^a The Pennsylvania State University   (United States)

^b EXXONMOBIL UPSTREAM RESEARCH COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CONTACTS (FLUID MECHANICS); ELASTOPLASTICITY; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; PLASTIC DEFORMATION; PLASTIC FLOW; SURFACE ROUGHNESS; TRIBOLOGY; COMPUTATIONAL GEOMETRY; DEFORMATION; INTERFACES (MATERIALS); PRESSURE EFFECTS; STRESS ANALYSIS;

SLIDING CONTACTS; ASPERITY LOAD CAPACITY; BOUNDARY LUBRICATION; CONTACT MECHANICS; MICRO-CONTACTS; SLIDING ASPERITY CONTACTS;

FRICTION;

ASPERITY; BOUNDARY LUBRICATION; FINITE ELEMENT ANALYSIS; FRICTION; SLIDING CONTACT; SURFACE ROUGHNESS;

EID: 85024232518     PISSN: 10402004     EISSN: 1547397X     Source Type: Journal    
DOI: 10.1080/10402000308982658     Document Type: Article

References (28)

1. Greenwood, J. A. and Williamson, J. B. P. (1966), “Contact of Nominally Flat Surfaces," in Proc. Roy. Soc. (London), Ser. A295, pp 300-319.
2. Johnson, K. L., Greenwood, J. A. and PonnPoon, S. Y. (1972), “Simple Theory of Asperity Contact in Elastohydrodynamic Lubrication.” Wear, 19, pp 91-108.
3. Jing, G. and Marchon, B. (1995), “A Sticlion Model for a Head-Disk Interface of a Rigid-Disk Drive," Jour. Applied Physics. 78, pp 4206-4217.
4. Zhao, Y. and Chang, L. (2002), “A Micro-Contact and Wear Model for Chemical-Mechanical Polishing of Silicon Wafers,” Wear, 252, pp 220-226.
5. Proritsky, H. and Schenectady, N. Y. (1950), “Stresses and Defleclion of Cylindrical Bodies in Contact with Application to Contact of Gears and of Locomotive Wheels,” ASME Jour. Applied Mechanics, 17, pp 191-201.
6. Smith, J. O. and Liu, C. K. (1953), “Stresses Due to Tangential and Normal Loads on an Elastic Solid,” ASME Jour. Applied Mechanics. 20, pp 157-166.
7. Hamilton, G. M. and Goodman, L. E. (1966), “The Stress Field Created by a Circular Sliding Contact,” ASME Jour. Applied Mechanics, 88. pp 371-376.
8. Hamilton, G. M. (1983), “Explicit Equations for the Stresses Beneath a Sliding Spherical Contact,” in Proc. IMechE. Part C: Mechanical Engineering Science, 197, pp 53-59.
9. Sackfield, A. and Hills, D. (1983), “A Note on the Hertz Contact Problem: a Correlation of Standard Formulae.” Jour. Strain Analysis, 18, pp 195-197.
10. Johnson, K. L. and Jefferis, J. A. (1963), “Plastic Flow and Residual Stresses in Rolling and Sliding Contact.” in Proc. Symposium on Fatigue Rolling Contact, IMechE. London, pp 54 -65.
11. Hills, D. A. and Ashelby, D. W. (1982), “The Influence of Residual Stresses on Contact Load Bearing Capacity,” Wear, IS. pp 221-240.
12. McFarlane, J. F. and Tabor, D. (1950), “Adhesion of Solids and the Effect of Surface Films," in Proc. Roy. Soc. London, Ser. A 202, pp 224-243.
13. McFarlane, J. F. and Tabor, D. (1950), “Relation between Friction and Adhesion,” in Proc. Roy. Soc. London, Ser. A 202, pp 244-253.
14. Tabor, D. (1959), “Junction Growth in Metallic Friction: the Role of Combined Stresses and Surface Contamination,” in Proc. Roy. Soc. London, Ser. A 251, pp 378-393.
15. Johnson, K. L. (1968), “Deformation of a Plastic Wedge by a Rigid Flat Die under the Action of a Tangential Force,” Jour. Mechanics and Physics of Solids, 16, p 395.
16. Collins, I. F. (1980), “Geometrically Self-Similar Deformations of a Plastic Wedge," Int. Jour. Mechanical Sciences, 22, pp 735-742.
17. Tian, H. and Saka, N. (1991), “Finite-Element Analysis of an Elastic-Plastic 2- Layer Half-Space Sliding Contact,” Wear, 148, pp 261-285.
18. Krai, E. R. and Komvopoulos, K. (1996), “Three-Dimensional Finite Element Analysis of Surface Deformation and Stresses in an Elastic-Plastic Layered Medium Subjected to Indentation and Sliding Contact Loading,” ASME Jour. Applied Mechanics, 63, pp 365-375.
19. Tangena, A. G. and Wijnhoven, P. J. M. (1985), “Finite Element Calculations on the Influence of Surface Roughness on Friction,” Wear, 103, pp 345-354.
20. Faulkner, A. and Amell, R. D. (2000), “The Development of a Finite Element Model to Simulate the Sliding Interaction Between Two, Three-Dimensional Elastoplastic, Hemispherical Asperities," Wear. 242, pp 114-122.
21. Nagaraj, H. S. (1984), “Elastoplastic Contact of Bodies with Friction under Normal and Tangential Loading," ASME Jour Trib., 106, pp 519-526.
22. ABAQUS (2000), V6.2 User's Manual, Pawtucket, Rl: Hibbitt, Karlsson & Sorensen Inc.
23. Irving, H. S. and Francis, A. C. (1992), Elastic and Inelastic Stress Analysis, Prentice Hall, Englewood Cliffs, NJ.
24. Mesarovic, S. D. J. and Fleck, N. A. (1999), “Spherical Indentation of Elastic- Plastic Solids," in Proc. Roy. Soc. London, Ser. A 455, pp 2707-2728.
25. Johnson, K. L. (1985). Contact Mechanics, Cambridge University Press, Cambridge.
26. Zhao, Y., Maietta, D. and Chang, L. (2000), “An Asperity Micro-Contact Model Incorporating the Transition from Elastic Deformation to Fully Plastic Flow,” ASME Jour. Trib., 122, pp 86-93.
27. Kogut, L. and Etsion, I. (2001), “Elastic-Plastic Contact Analysis of a Sphere and a Rigid Flat,” ASME Jour. Applied Mechanics (in press).
28. McCool, J. I. (1986), “Comparison of Models for the Contact of Rough Surfaces," Wear, 107, pp 37-60.