Load history effects resulting from compression precracking

ASTM Special Technical Publication

Volumn , Issue 1461, 2005, Pages 43-59

  James, Mark A ^a   Forth, Scott C ^b   Newman, John A ^c  

^a NATIONAL INSTITUTE OF AEROSPACE   (United States)

^b NASA LANGLEY RESEARCH CENTER   (United States)

^c US Army Research Laboratory Hampton   (United States)

Author keywords

Compression precracking; Finite element analysis; Residual stress; Threshold

Indexed keywords

CRACK PROPAGATION; DATA ACQUISITION; FATIGUE OF MATERIALS; FINITE ELEMENT METHOD; RESIDUAL STRESSES;

COMPRESSION PRECRACKING (CPC); THRESHOLD;

CRACKING (CHEMICAL);

EID: 33244477184     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp11485s     Document Type: Conference Paper

References (26)

1. Newman, J.C., Jr., "Analyses of Fatigue Crack Growth and Closure Near Threshold Conditions for Large-Crack Behavior," Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP 1372, J.C. Newman, Jr. and R.S. Piascik, Eds., ASTM International, West Conshohocken, PA, 2000, pp. 227-251.
2. Garr, K.R. and Hresko, G.C., III, "A Size Effect on the Fatigue Crack Growth Rate Threshold of Alloy 718," Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP 1372, J.C. Newman, Jr. and R.S. Piascik, Eds., ASTM International, West Conshohocken, PA, 2000, pp. 155-174.
3. Haakon, O. L. and Stephens, R. R., "Effect of Geometry and Load History on Fatigue Crack Growth in Ti-62222," Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP 1372, J.C. Newman, Jr. and R.S. Piascik, Eds., ASTM International, West Conshohocken, PA, 2000, pp. 175-191.
4. Forth, S.C., Newman, J.C., Jr., and Forman, R.G., "On Generating Fatigue Crack Growth Thresholds," International Journal of Fatigue, Vol. 25, 2003.
5. Hubbard, R. P., "Crack Growth under Cyclic Compression," J. Basic Engineering, Trans ASME 91,1969, pp. 625-631.
6. Hill, R., The Mathematical Theory of Plasticity, Oxford University Press, London, 1950.
7. Suresh, S., "Crack Initiation In Cyclic Compression and Its Applications," Engineering Fracture Mechanics, Vol. 21, No. 3, 1985, pp. 452-463.
8. Tabernig, B. and Pippan, R., "Resistance Curves For The Threshold Of Fatigue Propagation: The Influence Of Microstructure," Proceedings, Fatigue-99, X.R. Wu and Z.G. Wang, Eds., Beijing, P. R. China, 1999, pp. 1477-1482.
9. Tabernig, B. and Pippan, R., "Determination Of The Length Dependence of the Threshold for Fatigue Crack Propagation," Engineering Fracture Mechanics, 69, 2002, pp. 899-907.
10. Pippan, R., "The Growth of Short Cracks under Cyclic Compression," Fat Fract. of Eng Mater Struct, Vol. 9, No. 5, 1987, pp. 319-328.
11. Aswath, P. B., Suresh, S., Holm, D. K., and Blom A. F., "Load Interaction Effects on Compression Fatigue Crack Growth in Ductile Solids," Journal of Engineering Materials and Technology, Vol. 110, July 1988, pp. 278-285.
12. Newman, J.C., Jr, "Finite Element Analysis of Fatigue Crack Propagation - Including the Effects of Crack Closure," Ph.D. Thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA, 1974.
13. Newman, J.C., Jr, Mechanics of Crack Growth, ASTM STP 590, ASTM International, West Conshohocken, PA, 1976, pp. 281-301.
14. McClung, R.C., "Finite Element Modeling of Crack Closure During Simulated Fatigue Threshold Testing," International Journal of Fracture, Vol. 52, 1991, pp. 145-157.
15. McClung, R.C., "Finite Element Analysis Of Fatigue Crack Closure: A Historical And Critical Review," Fatigue '99: Seventh International Fatigue Congress, Beijing; China, 8-12 June 1999, pp. 2655-2660.
16. Gullerud, A. S., Koppenhoefer, Roy, A., Roychowdhury, S., Walters, M., and Dodds, R. H., Jr., WARP3D - Release 14.0 Users Manual, Department Of Civil Engineering, University of Illinois at Urbana-Champaign, Urbana, IL, 2002.
17. Gullerud, A. S., Dodds, R. H., Jr., Hampton, R. W., and Dawicke, D. S., "Three-Dimensional Modeling of Ductile Crack Growth in Thin Sheet Metals: Computational Aspects and Validation," Engineering Fracture Mechanics 63, 1999, pp. 347-374.
18. Hughes, T. J., "Generalization of Selective Integration Procedures to Anisotropic and Nonlinear Media," International Journal for Numerical Methods in Engineering, Vol. 15, 1980, pp. 1413-1421.
19. McClung, R.C., "Analysis of Fatigue Crack Closure During Simulated Threshold Testing," Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP 7372, J.C. Newman, Jr. and R.S. Piascik, Eds., ASTM International, West Conshohocken, PA, 2000, pp. 209-226.
20. Rybicki, E.F. and Kanninen, M.F., "A Finite-Element Calculation of Stress-Intensity Factors by a Modified Crack Closure Integral," Engineering Fracture Mechanics, Vol. 9, 1977, pp. 931-938.
21. Krueger, R., "The Virtual Crack Closure Technique: History, Approach and Applications," NASA/CR-2002-211628, ICASE Report No. 2002-10, May 2002. ASME, Applied Mechanics Reviews, in press.
22. th Volume ASTM STP 1321, T.L. Panontin and S.D. Sheppard, Eds., ASTM International, West Conshohocken, PA, 1998.
23. Pippan, R., Berger, M., and Stuwe, H.P., "The Influence of Crack Length on Fatigue Crack Growth in Deep Sharp Notches," Metallurgical Transactions, Vol. 18A, 1987, pp. 429-435.
24. Pippan, R., Stüwe, H.P., and Galos, K., "A Comparison of Different Methods to Determine the Threshold of Fatigue Crack Propagation," Fatigue, Vol. 16, 1994, pp. 579-582.
25. Pippan, R., Plochl, L., Dlanner, F., and Stuwe, H.P., "The Use of Fatigue Specimens Precracked in Compression for Measuring Threshold Values and Crack Growth," Journal of Testing and Evaluation, JTEVA, Vol. 22, 1994, pp. 98-103.
26. Tabernig, B., Powell, P., and Pippan, R., "Resistance Curves for the Threshold of Fatigue Crack Propagation in Particle Reinforced Aluminum Alloys," Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP 1372, J.C. Newman, Jr. and R.S. Piascik, Eds., ASTM International, West Conshohocken, PA, 2000, pp. 96-108.