Parametric error modeling and software error compensation for rapid prototyping

Rapid Prototyping Journal

Volumn 9, Issue 5, 2003, Pages 301-313

  Tong, Kun ^a   Lehtihet, E Amine ^a   Joshi, Sanjay ^a  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

Computer software; Parametric measures; Rapid prototypes

Indexed keywords

BENCHMARKING; COMPUTER SOFTWARE; ERROR ANALYSIS; FUNCTIONS; ITERATIVE METHODS; LITHOGRAPHY; MOTION PLANNING; SURFACE ROUGHNESS;

COORDINATE MEASURING MACHINES (CMM); ERROR FUNCTIONS; PARAMETRIC MEASURES; RAPID PROTOTYPES;

RAPID PROTOTYPING;

EID: 3242731916     PISSN: 13552546     EISSN: None     Source Type: Journal    
DOI: 10.1108/13552540310502202     Document Type: Review

References (29)

1. Arni, R.K. and Gupta, S.K. (1999), "Manufacturability analysis for solid freeform fabrication". Proceedings of DETC 1999, ASME Design Engineering Technical Conference, pp. 147-58.
2. Cheng, W., Fuh, J.Y.H., Nee, A.Y.C., Wong, Y.S., Loh, H.T. and Miyazawa, T. (1995), "Multi-objective optimization of part-building orientation in stereolithgraphy". Rapid Prototyping Journal, Vol. 1 No. 4, pp. 12-23.
3. Farentinos, S. and Khoshnevis, B. (2000), A Study of Accuracy of Automated Fabrication, The University of Southern California, http://www.pmli.com/ accuracy_study.html
4. Gargiulo, E.P. and Belfiore, D.A. (1991), "Photopolymer solid imaging process accuracy", Intelligent Design and Manufacturing for Prototyping, PED-Vol. 50 pp. 81-95.
5. Hocken, R. (1977), "Three dimensional metrology", Annals of the CIRP, Vol. 26 No. 2, pp. 403-8.
6. Hocken, R. (1995), "Software correction of precision machines", A Report from Precision Engineering Laboratory of UNC Charlotte to National Institute of Standards and Technology in Fulfillment of Contract No. NIST-60NANB2D1214.
7. Iuliano, L., Ippolito, R. and De Filippi, A. (1995), "A new user part for performances evaluation of rapid prototyping systems", Proceedings of 3rd European Conference on Rapid Prototyping and Manufacturing, pp. 327-39.
8. Juster, N.P. and Childs, T.H. (1995), "A comparison of rapid prototyping processes". Proceedings of 3rd European Conference on Rapid Prototyping and Manufacturing, pp. 35-52.
9. Kruth, J.P., Vanherck, P. and De Jonge, L. (1994), "Self-calibration method and software error correction for three-dimensional coordinate measuring machines using artifact measurements", Measurement, Vol. 14, pp. 157-67.
10. Kulkarni, P. and Dutta, D. (1996), "An accurate slicing procedure for layered manufacturing", Computer-aided Design, Vol. 28 No. 9, pp. 683-97.
11. Kunzman, H., Trapet, E. and Wäldele, F. (1990), "Concept for calibration, acceptance test, and periodic inspection of coordinate measuring machines using reference objects", Annals of the CIRP, Vol. 39 No. 1, pp. 561-4.
12. Liu, W., Li, L. and Kochhar, K. (1998a), "A method for assessing geometrical errors in layered manufacturing. Part 1 : error interaction and transfer mechanisms". International Journal of Advanced Manufacturing Technology, Vol. 14, pp. 637-43.
13. Liu, W., Li, L. and Kochhar, K. (1998b), "A method for assessing geometrical errors in layered manufacturing. Part 2: mathematical modeling and numerical evaluation". International Journal of Advanced Manufacturing Technology, Vol. 14, pp. 644-50.
14. Lynn, CM. and Rosen, D.W. (1999), "SLA-250 parts vs geometric tolerances: quantitative results", North American Stereolithography User Group Conference, pp. 1-15.
15. Lynn, C.M. and Rosen, D.W. (2000), "Usage of accuracy models in Stereolithography process planning". Rapid Prototyping Journal, Vol. 6 No. 2, pp. 77-87.
16. Mou, J. and Liu, R.C. (1995), "A methodology for machine tools error correction using reference parts", International Journal of Computer Integrated Manufacturing, Vol. 8 No. 1, pp. 64-77.
17. Nee, A.Y.C., Fuh, J.Y.H. and Miyazawa, T. (2001), "On the improvement of the Stereolithography process", International Journal of Material Processing Technology, Vol. 113, pp. 262-8.
18. Ni, J. (1997), "CNC machine accuracy enhancement through real-time error compensation", Journal of Manufacturing Science and Engineering-Transactions of the ASME, Vol. 119 No. 4B, pp. 717-25.
19. Onuh, S.O. and Hon, K.K.B. (2001), "Improving stereolithgraphy part accuracy for industrial applications". International Journal of Advanced Manufacturing Technology, Vol. 17, pp. 61-8.
20. Philpott, M.L. and Green, P.A. (1995), "An error compensation strategy for replication by rapid prototyping", Journal of Engineering for Industry, Vol. 117, pp. 423-9.
21. Reeves, P.E. and Cobb, R.C. (1997), "Surface deviation modeling of LMT processes - a comparative study", Proceedings of 5th European Conference on Rapid Prototyping and Manufacturing, pp. 59-75.
22. Sartori, S. and Zhang, G.X. (1995), "Geometric error measurement and compensation of machines", Annals of the CIRP, Vol. 44 No. 2, pp. 599-609.
23. Soltysik, M.D. (2000), "Benchmarking dimensional and geometrical accuracy among rapid prototyping systems", MS thesis. The Pennsylvania State University.
24. Trapet, E. and Waldele, F. (1991), "A reference object based method to determine the parametric error components of coordinate measuring machines and machine tools", Measurement, Vol. 9 No. 1, pp. 17-22.
25. Wah, P.K., Murty, K.G., Joneja, A. and Chiu, L.C. (2001), "Tool path optimization in layered manufacturing", IIE Transaction, Vol. 34 No. 4, pp. 335-47.
26. Zhang, G.X. and Fu, J.Y. (2000), "A method for optical CMM calibration using a grid plate", Annals of the CIRP, Vol 49 No. 1, pp. 399-402.
27. Zhang, G.X., Ouyang, R., Lu, B., Hocken, R., Veale, R. and Donmez, A. (1988), "A displacement method for machine geometry calibration", Annals of the CIRP, Vol. 37 No. 1, pp. 515-8.
28. Zhang, G.X., Veale, R., Charlten, T., Borchardt, B. and Hocken, R. (1985), "Error compensation of coordinate measuring machines", Annals of the CIRP, Vol. 34 No. 1, pp. 445-8.
29. Zhou, J.G., Herscovici, D. and Chen, C.C. (2000), "Parametric process optimization to improve the accuracy of rapid prototyped stereolithography parts", International Journal of Machine Tools and Manufacturing, Vol. 40, pp. 363-79.