CMC machine accuracy enhancement through real-time error compensation

Journal of Manufacturing Science and Engineering, Transactions of the ASME

Volumn 119, Issue 4B, 1997, Pages 717-725

  Ni, Jun ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER CONTROL; ERROR COMPENSATION; ERROR CORRECTION; MACHINING; NUMERICAL CONTROL SYSTEMS; REAL TIME SYSTEMS; THERMAL EFFECTS;

REAL TIME ERROR COMPENSATION; THERMALLY INDUCED QUASISTATIC MACHINE TOOL ERRORS;

MACHINE TOOLS;

EID: 0031273634     PISSN: 10871357     EISSN: 15288935     Source Type: Journal    
DOI: 10.1115/1.2836815     Document Type: Article

References (54)

1. Anjanappa, M., Anand, D. K., Kirk, J. A., and Shyam, S., 1981, “Error Correotion Methodologies and Control Strategies for Numerical Control Machines,” Control Methods for Manufacturing Process, DSC-Vol. 7, pp. 41-49.
2. Auia, M. H., and Kops, L., 1978, “On the Role of Fixed Joints in Thermal Deformation of Machine Tool Structures,” Annals of C1RP, Vol. 27, No. 1, pp. 305-310.
3. Attia, M. H., and Kops, L., 1981, “System Approach to the Thermal Behavior and Deformation of Machine Tool Structures in Response to the Effect of Fixed Joints,” ASME Journal of Engineering for Industry, Vol. 103, pp. 67-72.
4. Breev, B. T., 1951, “The Influence of Heat Generation in Grinding Machines on Their Accuracy,” Machine Tool, Vol. 22, No. 4.
5. Bosch, A. J., 1995, Coordinate Measuring Machines and Systems, Marcel Dek- ker.
6. Bryan, J. B., 1968, “International Status of Thermal Error Research,” Annals of CIRP, Vol. 16, pp. 203-215.
7. Bryan, J. B., Donaldson, R. R., McClure, E., and Clouser, R. R., 1972, SME, MR-72-138.
8. Bryan, J. B., 1990, “International Status of Thermal Error Research (1990),” Annals of CIRP, Vol. 39/2.
9. Camera, A., Favarato, M., Militano, L., and D’Aprilo, F., 1976, “Analysis of the Thermal Behavior of a Machine Tool Table Using the Finite Element Method,” Annals of the CIRP, Vol. 25, No. 1.
10. Chen, J. S., Yuan, J., Ni, J., and Wu, S.M., 1992, “Compensation of NonRigid Body Kinematic Effect on a Machining Center,” Transaction of NAMRI, Vol. 20, pp. 325-329.
11. Chen, J. S., Yuan, J., Ni, J., and Wu, S. M., 1993, “Real-Time Compensation of Time-Variant Volumetrie Error on a Machining Center,” ASME Journal of Engineering for Industry, Vol. 114, Nov, pp. 472-479.
12. Donmez, M. A., Blomquist, D. S., Hocken, R. J., Liu, C. R., and Barash, M. M., 1986, “A General Methodology for Machine Tool Accuracy Enhancement by Error Compensation,” Precision Engineering, Vol. 8, No. 4, pp. 187-196.
13. Ferreira, P. M., and Liu, C. R., 1986, “An Analytical Quadratic Model for the Geometric Error of a Machine Tool,” Journal of Manufacturing Systems, Vol. 5, No. 1, pp. 51-62.
14. French, D., and Humphries, S. H., 1967, “Compensation for Backlash and Alignment Errors in a Numerically Controlled Machine Tool by a Digital Computer Program,” Proceedings, The 8th MTDR Conference, Vol. 8, No. 2, pp. 707-726.
15. Donaldson, R., and Thompson, D. C., 1986, “Design and Performance of a Small Precision CNC Turning Machine,” Annals of the CIRP, Vol. 35, No. 1, pp. 373-376.
16. Ferreira, P. M., and Liu, C. R., 1993, “A Method for Estimating and Compensating Quasistatic Errors of Machine Tools,” ASME Journal of Engineering for Industry, Vol. 115, pp. 149-159.
17. Hai, N., Yuan, J., and Ni, J., 1994, “Reverse Kinematic Analysis of Machine Tool Error Using Telescoping Ball Bar,” ASME, PED-Vol. 68-1, pp. 277-286.
18. Herreman, G., Berry, F., and Dowdy, C., 1980, “Laser Measurement Systems for Machine Tool Testing,” Technology of Machine Tools, Vol. 5: Machine Tool Accuracy, Hocken, R., ed.
19. Hocken, R. J., 1980, “Technology of Machine Tools, Vol. 5, Machine Tool Accuracy,” Machine Tool Task Force.
20. Hocken, R., Simpson, J. A., Borchardt, B., Lazar, J., Reeve, C., and Stein, P., 1977, “Three Dimensional Metrology,” Annals of the CIRP, Vol. 26, No. 2, pp. 403-408.
21. Janeczko, J., 1988, “Machine Tool Thermal Distortion Compensation,” Proceedings, 4th Biennial International Machine Tool Technology Conference.
22. Jedrzejewski, J., Kaczmarek, J., Kowal, Z., and Winiarski, Z., 1990, “Numerical Optimization of Thermal Behavior of Machine Tools,” Annals of the CIRP, Vol. 39, No. 1, pp. 109-112.
23. Koliskor, A. S., et al., 1971, “Compensating for Automatic Cycle Machining Error,” Machines and Tooling, Vol. 41, No. 5.
24. Kunzmann, H., Ni, J., and Waldele, F., 1995, “Accuracy Enhancement,” Chapter 10 in Coordinate Measuring Machines and System, Marcel Dekker.
25. Kurtoglu, A., 1990, “The Accuracy Improvement of Machine Tools,” Annals of the CIRP, Vol. 39, No. 1, pp. 417-419.
26. Leete, D. J., 1961, “Automatic Compensation of Alignment Errors in Machine Tools,” International Journal of Machine Tool Design and Research, Vol. 1, pp. 293-324.
27. Lin, P. D., and Ehmann, K. F., 1993, “Direct Volumetric Error Evaluation for Multi-Axis Machines,” Int. J. Of Mach. Tools Manufact., Vol. 33, No. 5, pp. 675-693.
28. Lo, H., Ni, J., and Yuan, J., 1996, “Thermal Sensor Placement Strategy for Machine Error Compensation,” submitted to IMECE.
29. Love, W. J., and Scarr, A. J., 1973, “Determination of the Volumetric Accuracy of Multi-Axis Machines,” Proceedings, The 14th MTDR Conference, Vol. 14, pp. 307-315.
30. McClure, E. R., 1967, “Significance of Thermal Effect in Manufacturing and Metrology,” Annals of CIRP, Vol. 15, pp. 61-66.
31. Moriwaki, T., Shamoto, E., and Kawano, M., 1995, “Estimation of Thermal Deformation of Machine Tool by Applying Neural Network,” Transaction of JSME, Part C, v 61 n 584, p. 1691-1696.
32. Mou, J., Donmez, M. A., and Cetinkunt, S., 1995, “Adaptive Error Correction Method Using Feature-Based Analysis Techniques for Machine Performance Improvement, Part i and Part 2,” ASME Journal of Engineering for Industry, Vol. 117, No. 4, pp. 584-600.
33. Ni, J., Huang, P. S., and Wu, S. M., 1992, “A Multi-Degree-of-Freedom Measuring System for CMM Geometric Errors,” ASME Journal of Engineering for Industry, Vol. 114, pp. 362-369.
34. Nishiwaki, N., Takeyama, H., and Hori, S., 1974, “A Method for Improving the Thermal Behavior of Machine Tools with Heat Pipes,” Bulletin of Japan Society of Precision Engineering, Vol. 15, No. 4, pp. 249-250.
35. Okushima, K., and Kakino, Y., 1975, “An Analysis of Methods used in Minimizing Thermal Deformations of Machine Tools,” Proceedings, The 16th MTDR Conference, Vol. 16, pp. 195-201.
36. Otsuka, J., 1977, “A Study on the Coolant Temperature Control (For Cooling Machine Tools and Machined Workpieces to Prevent Thermal Deformation),” Bulletin of Japan Society of Precision Engineering, Vol. 11, No. 3, pp. 109-114.
37. Sata, T., Takeuchi, Y., and Okubo, N., 1975, “Control of the Thermal Deformation of a Machine Tool,” Proceedings, The 16th MTDR Conference, Vol. 16, pp. 203-208.
38. Schultschik, R., 1977, “The Components of the Volumetric Accuracy,” Annals of CIRP, Vol. 25, No. 1, pp. 223-227.
39. Soons, J. A., Theuws, F. C., and Schellekens, P. H., 1992, “Modeling the Errors of Multi-Axis Machines: A General Methodology,” Precision Engineering, Vol. 14, No. 1, pp. 5-19.
40. Spur, G., Hoffmann, E., Paluncic, Z., Benzinger, K., and Nymoen, H., 1988, “Thermal Behavior Optimization of Machine Tools,” Annals of CIRP, Vol. 37, No, 1.
41. Sugishita, H., et al., 1988, “Development of Concrete Machining Center and Identification of the Dynamics and the Thermal Structural Behavior,” Annals of C1RP, Vol. 37, No. 1.
42. Sutton, G. P., 1980, “Economy of Accuracy,” Technology of Machine Tools, Vol. 5: Machine Tool Accuracy, Hocken, R., ed., Lawrence Livermore National Laboratories, University of California, Livermore, CA.
43. Takada, K., and Tanabe, I., 1987, “Basic Study on Thermal Deformation of Machine Tool Structure Composed of Epoxy Resin Concrete and Cast Iron,” Bulletin of Japan Society of Precision Engineering, Vol. 21, No. 3, pp. 173-178.
44. Tlusty, J., and Mutch, G. F., 1973, “Testing and Evaluation Thermal Deformations of Machine Tools,” Proceedings, The 14th MTDR Conference, Vol. 14, pp. 285-297.
45. Wang, L., and Moriwaki, T., 1994, “An Approach to Dynamic Analysis of Thermal Problems for Machines Under Operating States,” Mem. Grad. School Sci. & Technol., Kobe Univ., 12-A: 157-173.
46. Week, M., and Zangs, L., 1975, “Computing the Thermal Behavior of Machine Tools Using the Finite Element Method-Possibilities and Limitations,” Proceedings, The 16th MTDR Conference, Vol. 16, pp. 185-194.
47. Woytowitz, M. A., et al., 1989, “Tool Path Error Analysis for High Precision Milling with a Magnetic Bearing Spindle,” 1989 ASME Publication, pp. 129-142.
48. Yang, S., Yuan, J., and Ni, J., 1996a, “Accuracy Enhancement of a Horizontal Machining Center,” Journal of Manufacturing Systems, Vol. 15, No. 2.
49. Yang, S., Yuan, J., and Ni, J., 1996b, “The Improvement of Thermal Error Modeling and Compensation on Machine Tools by CMAC Neural Network,” International Journal of Machine Tools and Manufacture, Vol. 36, No. 4, pp. 527-537.
50. Yang, S., Yuan, J., and Ni, J., 1996c, “Real-Time Cutting Force-Induced Error Compensation on a Turning Center,” Proceedings of the Second S. M. Wu Symposium, Ann Arbor.
51. Yee, K. W., and Gavin, R. J., 1990, “Implementing Fast Part Probing and Error Compensation on Machine Tools,” Technical Report NISTIR-4447, National Institute of Standards and Technology, Gaithersburg, MD.
52. Yoshida, Y., and Honda, F., 1967, “Thermal Deformation of Machine Tool Structure—The Bed of a Lathe,” Annals of the CIRP, Vol. 15, pp. 337-344.
53. Zhang, G., Wang, C., Hu, X., and Jing, F., 1985, “Error Compensation of Coordinate Measuring Machines,” Annals of CIRP, Vol. 34, No. 1, pp. 445-448.
54. Ziegert, J. C., and Mize, C. D., 1994, “Laser Ball Bar: A New Instrument for Machine Tool Metrology,” Precision Engineering, V.16, No. 4, pp. 259-267.