Stress analyses and geometry effects during cyclic loading using thermography

Journal of Engineering Materials and Technology

Volumn 127, Issue 1, 2005, Pages 75-82

  Yang, B ^a   Liaw, P K ^a   Huang, J Y ^b   Kuo, R C ^b   Huang, J G ^c   Fielden, D E ^a  

^a UNIVERSITY OF TENNESSEE   (United States)

^b INSTITUTE OF NUCLEAR ENERGY RESEARCH   (Taiwan)

^c TAIWAN POWER COMPANY   (Taiwan)

Author keywords

[No Author keywords available]

Indexed keywords

FATIGUE OF MATERIALS; GEOMETRY; HEAT TRANSFER; PHASE TRANSITIONS; STRESS ANALYSIS; THERMODYNAMICS; THERMOELASTICITY; THERMOGRAPHY (IMAGING);

HEAT EVALUATION PROCESS; HEAT-DISSIPATION-RATE (HDR); LOW-CYCLE FATIGUE LOADING; REACTOR COOLENT PRESSURE BOUNDARY;

CYCLIC LOADS;

EID: 15844383854     PISSN: 00944289     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1836793     Document Type: Conference Paper

References (43)

1. Margulies, L., Winther, G., and Poulsen, H. F., 2001, "In Situ Measurement of Grain Rotation during Deformation of Polycrystals," Science, 291, pp. 2392-2394.
2. Larson, B. C., Yang, W., Ice, G. E., Budai, J. D., and Tischler, J. Z., 2002, "Three-Dimensional X-Ray Structural Microscopy with Submicrometre Resolution," Nature (London), 415, pp. 887-890.
3. Wang, Y. D., Tian, H., Stoica, A. D., Wang, X., Liaw, P. K., and Richardson, J. W., 2003, "The Development of Residual Stresses due to Grain Orientation in a Cyclically Deformed Alloy," Nature Materials, 2(2), pp. 101-106, http://www.nature.com/cgi-taf/DynaPage.taf?file=/nmat/journal/v2/n2/ full/nmat812.html.
4. Jiang, L., Huang, M., Brooks, C. R., and Liaw, P. K., 1999, "Acoustic Emission Detection of Fatigue Damage," in Proceeding of Nondestructive Evaluation (NDE) and Materials Properties IV Symposium, TMS, edited by Liaw, P. K., Arsenault, R. J., Green, Jr., R. E., Murty, K. L., and Thompson, R. B., pp. 43-60.
5. Fine, M. E., Connor, Z. M., and Achenbach, J. D., 1999, "Early Stages of Fatigue Damage in Riveted Alclad 2024-T3 Aluminum Alloy Lap Joint Specimens," in Proceeding of Nondestructive Evaluation (NDE) and Materials Properties IV Symposium, TMS, edited by Liaw, P. K., Arsenault, R. J., Green, Jr., R. E., Murty, K. L., and Thompson, R. B., pp. 1-9.
6. Birnbaum, G., and Free, G., 1979, "Eddy-current Characterization of Materials and Structures: A Symposium/Sponsored by ASTM Committee E-7 on Nondestructive Testing," American Society for Testing and Materials, Gaithersburg, MD, 5-7 September.
7. Moss, A. A., and Goldberg, H. I., 1979, "Computed Tomography, Ultrasound and X-Ray: An Integrated Approach," Masson Publication.
8. Jiang, L., Liaw, P. K., Brooks, C. R., Somieski, B., and Klarstrom, D. L., 2001, "Nondestructive Evaluation of Fatigue Damage in ULTEMET® Superalloy," Mater. Sci. Eng., A, 313(1-2), pp. 153-159.
9. Jeong, H., Hsu, D. K., and Liaw, P. K., 1998, "Anisotropic Conductivities of Multiphase Particulate Metal-Matrix Composites," Compos. Sci. Technol., 58, pp. 65-76.
10. Liaw, P. K., Hsu, D. K., Yu, N., Miriyala, N., and Jeong, H., 1996, "Investigation of Metal and Ceramic-Matrix Composites Moduli: Experiment and Theory," Acta Mater., 44(5), pp. 2101-2113.
11. Pitchumany, R., Liaw, P. K., Yao, S. C., Hsu, D. K., and Jeong, H., 1995, "Theoretical-Models for the Anisotropic Conductivities of 2-Phase and 3-Phase Metal-Matrix Composites," Acta Metall. Mater., 43(8), pp. 3045-3059.
12. Jeong, H. J., Hsu, D. K., Shannon, R. E., and Liaw, P. K., 1994, "Characterization of Anisotropic Elastic-Constants of Silicon-Carbide Particulate-Reinforced Aluminum Metal-Matrix Composites: 1. Experiment," Metall. Mater. Trans. A, 25(4), pp. 799-809.
13. Taylor, S., and Morken, J., 1998, "Thermographic Selection of Effective Catalysts from an Encoded Polymer-Bound Library," Science, 280, pp. 267-270.
14. Chaerle, L., Caeneghem, W. V., Messens, E., Lambers, H., Montagu, M. V., and Straeten, D. V. D., 1999, "Presymptomatic Visualization of Plant-virus Interactions by Thermography," Nat. Biotechnol., 17, pp. 813-816.
15. Ay, H., Jang, J., and Yeh, J. N., 2002, "Local Heat Transfer Measurements of Plate Finned-tube Heat Exchangers by Infrared Thermography," Int. J. Heat Mass Transfer, 45(20), pp. 4069-4078.
16. Marwaha, B., and Luss, D., 2002, "Formation and Dynamics of a Hot Zone in Radial Flow Reactor," AIChE J., 48(3), pp. 617-624.
17. Lohr, D. T., Enke, N. F., and Sandor, B. I., 1987, "Analysis of Fatigue Damage Evolution by Differential Infrared Thermography," Dynamic Failure: Proceedings of the 1987 SEM Fall Conference, October 25-27, Savannah, Georgia, pp. 169-174.
18. Liaw, P. K., Wang, H., Jiang, L., Yang, B., Huang, J. Y., Kuo, R. C., and Huang, J. G., 2000, "Thermographic Detection of Fatigue Damage of Pressure Vessel Steels at 1,000 Hz and 20 Hz," Scr. Mater., 42, pp. 389-395.
19. Luong, M. P., 1998, "Fatigue Limit Evaluation of Metals Using An Infrared Thermographic Technique," Mech. Mater., 28, pp. 155-163.
20. Guduru, P. R., Zehnder, A. T., Rosakis, A. J., and Ravichandran, G., 2001, "Dynamic Full Field Measurements of Crack Tip Temperatures," Eng. Fract. Mech., 68, pp. 1535-1556.
21. Machin, T. J., and Vernon, P. J., 2001, "Detecting Subsurface Cracking in Laminated Membranes Using Infrared Imaging," Polym. Compos., 22, pp. 752-761.
22. Gross, T. S., and Weertman, J., 1982, "Calorimetric Measurement of The Plastic Work of Fatigue Crack-propagation in 4140-Steel," Metall. Mater. Trans. A, 13(12), pp. 2165-2172.
23. Taylor, G. I., and Quinney, H., 1937, "The Latent Heat Remaining in a Metal after Cold Working," Proc. R. Soc. London, Ser. A, 163, pp. 157-181.
24. Henneke, E. G., Reifsnider, K. L., Shuford, R. I., Hinton, Y. L., Markert, B. R., 1982, "Thermography - Applications to the Manufacture and Non-Destructive Characterization of Composites," Proc. SPIE, 371, pp. 98-104.
25. Biot, M. A., 1956, "Thermoelasticity and Irreversible Thermodynamics," J. Appl. Phys., 27(3), pp. 240-253.
26. Rocca, R., and Bever, M. B., 1950, "The Thermoelastic Effect in Iron and Nickel as a Function of Temperature," Trans. AIME, 188, pp. 327-333.
27. Yang, B., Liaw, P. K., Wang, H., Jiang, L., Huang, J. Y., Kuo, R. C., and Huang, J. G., 2001, "Thermographic Investigation of The Fatigue Behavior of Reactor Pressure Vessel Steels," Mater. Sci. Eng., A, 314, pp. 131-139.
28. Dillon, O. W., 1963, "Coupled Thermoplasticity," J. Mech. Phys. Solids, 11, pp. 21-23.
29. Yang, B., Liaw, P. K., Wang, G., Peter, W. H., Buchanan, R. A., Yokoyama, Y., Huang, J. Y., Kuo, R. C., Huang, J. G., Fielden, D. E., and Klarstrom, D. L., 2004, "Thermal-Imaging Technologies for Detecting Damage during High-Cycle Fatigue," Metall. Mater. Trans. A, 35(1), pp. 15-23.
30. Zehnder, A. T., and Rosakis, A. J., 1991, "On the Temperature Distribution at the Vicinity of Dynamically Propagating Cracks in 4340 Steel," J. Mech. Phys. Solids, 39, pp. 385-415.
31. Zhou, M., Ravichandran, G., and Rosakis, A. J., 1996, "Dynamically Propagating Shear Bands in Impact-loaded Prenotched Plates - I. Experimental Investigations of Temperature Signatures and Propagation Speed," J. Mech. Phys. Solids, 44, pp. 981-1006.
32. Liaw, P. K., Yang, B., Tian, H., Jiang, L., Wang, H., Huang, J. Y., Kuo, R. C., Huang, J. G., Fielden, D., Strizak, J. P., and Mansur, L. K., 2002, "Frequency Effects on Fatigue Behavior and Temperature Evolution of Steels," Fatigue and Fracture Mechanics: 33rd Volume, ASTM STP 1417, W. G. Reuter and R. S. Piascik, Eds., ASTM International, West Conshohocken, PA, pp. 524-556.
33. Jiang, L., Wang, H., Liaw, P. K., Brooks, C. R., and Klarstrom, D. L., 2001, "Characterization of the Temperature Evolution during High-Cycle Fatigue of the ULTIMET Superalloy: Experiment and Theoretical Modeling," Metall. Mater. Trans. A, 32, pp. 2279-2296.
34. Wang, H., Jiang, L., Liaw, P. K., Brooks, C. R., and Klasstrom, D. L., 2000, "Infrared Temperature Mapping of ULTIMET Alloy during High-Cycle Fatigue Tests," Metall. Mater. Trans. A, 31, pp. 1307-1310.
35. Jiang, L., Wang, H., Liaw, P. K., Brooks, C. R., and Klarstrom, D. L., 2002, "Effects of Cyclic Loading on Temperature Evolution of ULTIMET® Super-alloy: Experiment and Theoretical Modeling," Trans. Nonferrous. Met. Soc. China, 12, pp. 734-747.
36. Chen, L. J., Liaw, P. K., Wang, H., He, Y. H., McDaniels, R. L., Jiang, L., Yang, B., and Klarstrom, D. L., 2004, "Cyclic Deformation Behavior of Haynes HR-120® Superalloy under Low-cycle Fatigue Loading," Mech. Mater., 36, pp. 85-98.
37. Jiang, L., Wang, H., Liaw, P. K., Brooks, C. R., Chen, L., and Klarstrom, D. L., 2004, "Temperature Evolution and Life Prediction in Fatigue of Superalloys," Metall. Mater. Trans. A, 35A(3), pp. 839-848.
38. Wang, H., Jiang, L., He, Y., Chen, L., Liaw, P., Seeley, R., and Klarstrom, D., 2002, "Infrared Imaging during Low-cycle Fatigue of HR-120 Alloy," Metall. Trans. A, 33, pp. 1287-1292.
39. Jiang, L., Wang, H., Liaw, P. K., Brooks, C. R., and Klarstrom, D. L., 2004, "Temperature Evolution during Low-Cycle Fatigue of ULTIMET Alloy: Experiment and Modeling," Mech. Mater., 36, pp. 73-84.
40. Yang, B., 2003,. "Thermographic Detection of Fatigue Damage of Reactor Pressure Vessel (RPV) Steels," J. Mater. Eng. Perform., 12(3), pp. 345-353.
41. Wang, G. Y., Liaw, P. K., Peter, W. H., Yang, B., Freels, M., Yokoyama, Y., Benson, M. L., Green, B. A., Saleh, T. A., McDaniels, R. L., Steward, R. V., Buchanan, R. A., Liu, C. T., and Brooks, C. R., 2004, "Fatigue Behavior and Fracture Morphology of Zr50A110Cu40 and Zr50A110Cu30Ni10 Bulk-Metallic Glasses," Intermetallics, 12(10-11), pp. 1219-1227.
42. Yang, B., Liaw, P. K., Wang, G., Morrison, M., Liu, C. T., Buchanan, R. A., and Yokoyama, Y., 2004 "In-Situ Thermographic Observation of Mechanical Damage in Bulk-Metallic Glasses During Fatigue and Tensile Experiments," Intermetallics, 12(10-11); pp. 1265-1274.
43. Wang, G. Y., Liaw, P. K., Peter, W. H., Yang, B., Yokoyama, Y., Benson, M. L., Green, B. A., Kirkham, M. J., White, S. A., Saleh, T. A., McDaniels, R. L., Steward, R. V., Buchanan, R. A., Liu, C. T., and Brooks, C. R., 2004, "Fatigue Behavior of Bulk-Metallic Glasses," Intermetallics, 12(7-9), pp. 885-892.