Critical factors that determine face-centered cubic to body-centered cubic phase transformation in sputter-deposited austenitic stainless steel films

Journal of Materials Research

Volumn 19, Issue 6, 2004, Pages 1696-1702

  Zhang, X ^a   Misra, A ^a   Schulze, R K ^a   Wetteland, C J ^a   Wang, H ^a   Nastasi, M ^a  

^a LOS ALAMOS NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ANNEALING; COMPRESSIVE STRENGTH; COOLING; CRYSTAL MICROSTRUCTURE; HIGH TEMPERATURE EFFECTS; METALLIC FILMS; NICKEL; PHASE TRANSITIONS; RESIDUAL STRESSES; SPUTTER DEPOSITION; TENSILE STRENGTH; THIN FILMS;

BODY CENTERED CUBIC STRUCTURE; FACE CENTERED CUBIC STRUCTURE; FURNACE COOLING; HIGH TEMPERATURE ANNEALING; PHASE STABILITY;

STAINLESS STEEL;

EID: 3142761143     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/JMR.2004.0215     Document Type: Article

References (28)

1. S.D. Dahlgren: Equilibrium phases in 304L stainless steel obtained by sputter-deposition. Metall. Trans. 1, 3095 (1970).
2. M.J. Godbole, A.J. Pedraza, L.F. Allard, and G. Geesey: Characterization of sputter-deposited 316L stainless steel films. J. Mater. Sci. 27, 5585 (1992).
3. S. Malavasi, A. Oueldennaoua, M. Foos, and C. Frantz: Metastable amorphous and crystalline phase in physical vapor deposited Fe-(Cr)-Ni-(C) deposits. J. Vac. Sci. Technol. A5, 1888 (1987).
4. J. Childress, S.H. Liou, and C.L. Chien: Ferromagnetism in metastable 304 stainless steel with bcc structure. J. Appl. Phys. 64, 6059 (1988).
5. J.P. Eymery and R. Krishnan: On some magnetic properties of 304 stainless steel films. J. Magn. Magn. Mater. 104-107, 1785 (1992).
6. T.F. Kelly, M. Cohen, and J.B. Vander Sande: Rapid solidification of a droplet-processed stainless steel. Metall. Trans. A15, 819 (1984).
7. R.P. Reed, "Martensitic Phase Transformation," in Materials at Low Temperatures, edited by R.P. Reed and A.F. Clark (American Society for Metals, Carnes Publication Services, Metals Park, OH, 1983), p. 299.
8. E.S. Machlin, in Materials Science in Microelectronics (Giro Press, Croton-on-Hudson, New York, 1995), p. 157.
9. M.J. Godbole, A.J. Pedraza, J.W. Park, and G. Geesey: The crystal structures of stainless steel films sputter-deposited on austenitic stainless steel substrates. Scripta Metall. Mater. 28, 1201 (1993).
10. X. Zhang, A. Misra, H. Wang, T.D. Shen, J.G. Swadener, J.D. Embury, H. Kung, R.G. Hoagland, and M. Nastasi: Strengthening mechanisms in nanostructured copper/304 stainless steel multilayers. J. Mater. Res. 18, 1600 (2003).
11. G.G. Stoney: Proc. R. Soc. London A82, 172 (1909).
12. L.R. Doolittle: Algorithms for the rapid simulation of Rutherford backscattering spectra. Nucl. Instrum. Methods Physics Research B9, 344 (1985).
13. L.R. Doolittle: A semiautomatic algorithm for Rutherford back-scattering analysis. Nucl. Instrum. Methods Physics Research B15, 227 (1986).
14. X. Zhang, A. Misra, H. Wang, T.D. Shen, M. Nastasi, T.E. Mitchell, J.P. Hirth, R.G. Hoagland, and J.D. Embury: Enhanced hardening in Cu/330 stainless steel multilayers by nanoscale twinning. Acta Mater. 52, 995 (2004).
15. X. Zhang, A. Misra, H. Wang, M. Nastasi, J.D. Embury, T.E. Mitchell, R.G. Hoagland, and J.P. Hirth: Nanoscale-twinning-induced strengthening in austenitic stainless steel thin films. Appl. Phys. Lett. 84, 1096 (2004).
16. S.L. Duan, J.O. Artman, B. Wong, and D.E. Laughlin: Study of the growth characteristics of sputtered Cr thin films. J. Appl. Phys. 67, 4913 (1990).
17. B. Okolo, P. Lamparter, U. Welzel, and E.J. Mittemeijer: Stress, texture, and microstructure in niobium thin films sputter deposited onto amorphous substrates. 95, 466 (2004).
18. N. Schell, J.H. Petersen, J. Bøttiger, A. Mucklich, J. Chevallier, K.P. Andreasen, and F. Eichhorn: On the development of texture during growth of magnetron-sputtered CrN. Thin Solid Films 426, 100 (2003).
19. U.C. Oh, J.H. Je, and J.Y. Lee: Change of the critical thickness in the preferred orientation of TiN films. J. Mater. Res. 10, 634 (1995).
20. J. Pelleg, L.Z. Zevin, S. Lungo, and N. Croitoru: Reactive-sputter-deposited TiN films on glass substrates. Thin Solid Films 197, 117 (1991).
21. C.V. Thompson: Texture evolution during grain growth in polycrystalline films. Scripta Metall. Mater. 28, 167 (1993).
22. 0.5N alloys grown by ultra-high-vacuum reactive magnetron sputtering. J. Appl. Phys. 73, 8580 (1993).
23. N. Schell, W. Matz, J. Bøttiger, J. Chevallier, and P. Kringhøj: Development of texture in TiN films by use of in situ synchrotron X-ray scattering. J. Appl. Phys. 91, 2037 (2002).
24. Alloy Phase Diagram: ASM Handbook (1990), Vol. 3, edited by ASM International Handbook Committee (ASM International, Materials Park, OH).
25. P.J. Grundy and J.M. Marsh: Amorphous thin films of stainless steel. J. Mater. Sci. Lett. 13, 677 (1978).
26. J.P. Eymery, N. Merakeb, Ph. Goudeau, A. Fnidiki, and B. Bouzabata: A Mossbauer comparative study of the local environment in metastable 304 stainless steel films depending on the preparation mode. J. Magn. Magn. Mater. 256, 227 (2003).
27. S. Sarkar, C. Bansal, and A. Chatterjee: Gibbs-Thomson effect in nanocrystalline Fe-Ge. Phys. Rev. B. 62, 3218 (2000).
28. O-H. Kwon, S-H. Ahn, J-G. Kim, and J-G. Han: An optimized condition for corrosion protection of type 316L films prepared by unbalanced magnetron sputtering in 3.5% NaCl solution. J. Mater. Sci. Lett. 21, 41 (2002).