An investigation on the initiation and propagation of damaged zones in adhesively bonded lap joints

Journal of Adhesion Science and Technology

Volumn 17, Issue 14, 2003, Pages 1889-1921

  Kemal Apalak, M ^a   Engin, Aysel ^a  

^a ERCIYES UNIVERSITY   (Turkey)

Author keywords

Adhesive joint; Damaged zone; Geometrical non linearity; Material non linearity; Plasticity; Stress analysis

Indexed keywords

BENDING (DEFORMATION); BOND STRENGTH (CHEMICAL); COMPUTATIONAL GEOMETRY; EPOXY RESINS; FRACTURE MECHANICS; INTERFACES (MATERIALS); LOADS (FORCES); PLASTICITY; POISSON RATIO; SCANNING ELECTRON MICROSCOPY; STIFFNESS; STRAIN; STRESS ANALYSIS; SURFACE TENSION; TENSILE TESTING; ADHESIVES; FAILURE (MECHANICAL); TENSILE STRENGTH; TENSILE STRESS;

DAMAGED ZONES; GEOMETRICAL NON-LINEARITY; MATERIAL NON-LINEARITY; POISSON EFFECTS; TENSILE LOADS;

ADHESIVE JOINTS;

ADHERENDS; ADHESIVE LAYERS; ADHESIVE THICKNESS; ADHESIVE-ADHEREND INTERFACE; ADHESIVELY BONDED LAP JOINT; DAMAGED ZONES; DOUBLE LAP JOINT; EPOXY ADHESIVES; FAILURE CRITERIA; FINITE ELEMENT; FRACTURE SURFACES; FREE EDGE; FREE END; GEOMETRICAL NON-LINEARITY; HYDROSTATIC STRESS STATE; INITIATION AND PROPAGATION; INTERFACIAL FAILURES; MATERIAL NON-LINEARITY; NONLINEAR MATERIALS; OVERALL STIFFNESS; OVERLAP REGION; POISSON EFFECTS; SEM MICROGRAPHS; TENSILE LOADS; ULTIMATE STRAIN; VON MISES CRITERION;

EID: 0348222237     PISSN: 01694243     EISSN: None     Source Type: Journal    
DOI: 10.1163/156856103770572043     Document Type: Article

References (38)

1. R. S. Raghava and R. M. Cadell, J. Mater. Sci. 8, 225 (1973).
2. L. J. Hart-Smith, McDonnell-Douglas Co. Report No: 6059A, Long Beach, California (1972).
3. L. J. Hart-Smith, NASA CR-112235, Langley Research Center, Hampton, VA (1973).
4. L. J. Hart-Smith, NASA CR-112236, Langley Research Center, Hampton, VA (1973).
5. L. J. Hart-Smith, NASA CR-112237, Langley Research Center, Hampton, VA (1973).
6. L. J. Hart-Smith, NASA CR-112238, Langley Research Center, Hampton, VA (1973).
7. L. J. Hart-Smith, NASA CR-2218, Langley Research Center, Hampton, VA (1974).
8. L. J. Hart-Smith, in: Developments in Adhesives - 2, A. J. Kinloch (Ed.), pp. 1-44. Elsevier Applied Science, London (1981).
9. F. Delale, F. Erdogan and M. N. Aydinoglu, J. Composite Mater. 15, 249-271 (1980).
10. F. Delale and F. Erdogan, Trans. ASME J. Appl. Mech. 48, 331-338 (1981).
11. J. W. Sawyer and P. A. Cooper, AIAA J. 19, 1443-1451 (1981).
12. J. A. Harris and R. D. Adams, Int. J. Adhesion Adhesives 4 (2), 65-78 (1984).
13. J. A. Harris and R. D. Adams, in: Adhesion 8, K. W. Allen (Ed.), pp. 1-18. Elsevier Applied Science, London (1984).
14. R. D. Adams and J. A. Harris, Int. J. Adhesion Adhesives 7, 69-80 (1987).
15. R. D. Adams, R. W. Atkins, J. A. Harris and A. J. Kinloch, J. Adhesion 20, 29-53 (1986).
16. A. D. Crocombe, Int. J. Adhesion Adhesives 9 (3), 167-178 (1989).
17. D. A. Bigwood and A. D. Crocombe, Int. J. Adhesion Adhesives 10 (1), 31-41 (1990).
18. A. D. Crocombe and D. A. Bigwood, J. Strain Anal. 27 (4), 211-218 (1992).
19. U. Edlund and A. Klarbring, Comput. Methods Appl. Mech. Eng. 78, 19-47 (1990).
20. A. J. Kinloch, Adhesion and Adhesives. Chapman and Hall, London (1987).
21. B. Chen and D. A. Dillard, Int. J. Solids Struct. 38, 6907-6924 (2001).
22. B. Chen and D. A. Dillard, Int. J. Adhesion Adhesives 21, 357-368 (2001).
23. K. D. Potter, F. J. Guild, H. J. Harvey, M. R. Wisnom and R. D. Adams, Int. J. Adhesion Adhesives 21, 435-443 (2001).
24. F. J. Guild, K. D. Potter, J. Heinrich, R. D. Adams and M. R. Wisnom, Int. J. Adhesion Adhesives 21, 445-453 (2001).
25. M. Kayupov and Y. A. Dzenis, Composite Struct. 54, 215-220 (2001).
26. P. T. Cheuk and L. Tong, Composites Sci. Technol. 62, 1079-1095 (2002).
27. A. Sheppard, D. Kelly and L. Tong, Int. J. Adhesion Adhesives 18, 385-400 (1998).
28. J. I. R. Blake, R. A. Shenoi, J. House and T. Turton, Composites A 32, 641-653 (2001).
29. U. Edlund and A. Klarbring, Int. J. Solids Struct. 30, 2693-2708 (1993).
30. L. E. Malvern, Introduction to the Mechanics of a Continuous Medium. Prentice-Hall, London (1969).
31. A. A. Saada, Elasticity - Theory and Applications. Pergamon Press, Oxford (1974).
32. W. Johnson and P. B. Mellor, Engineering Plasticity. Van Nostrand Reinhold, New York, NY (1973).
33. M. A. Crisfield, Non-linear Finite Element Analysis of Solids and Structures, Vol. 1. John Wiley, New York, NY (1991).
34. M. Kleiber, Incremental Finite Element Modelling in Non-linear Solid Mechanics. Ellis Horwood (1989).
35. O. C. Zienkiewicz and R. C. Taylor, The Finite Element Method (Solid and Fluid Mechanics, Dynamics and Non-linearity), Vol. 2. McGraw-Hill, New York, NY (1991).
36. A. D. Crocombe and A. C. Moult, in: Adhesion 12, K. W. Allen (Ed.). Elsevier Applied Science, London (1988).
37. R. D. Adams and W. C. Wake, Structural Adhesive Joints in Engineering. Elsevier Applied Science, London (1984).
38. J. Coppendale, Stress and failure analysis of structural adhesives, PhD Thesis, Bristol University, Bristol (1977).