Preparation of silicon-titanium-carbon-oxygen fabric/mullite filler/polytitanocarbosilane laminates by polymer impregnation and pyrolysis method

Journal of the American Ceramic Society

Volumn 87, Issue 6, 2004, Pages 996-1001

  Hirata, Yoshihiro ^a   Hayata, Kazunori ^a   Maeda, Tomoyuki ^a   Shibuya, Masaki ^b  

^a KAGOSHIMA UNIVERSITY   (Japan)

^b UBE INDUSTRIES LTD   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITION EFFECTS; DENSIFICATION; DENSITY (SPECIFIC GRAVITY); FILLERS; IMPREGNATION; LAMINATED COMPOSITES; MECHANICAL TESTING; MICROSTRUCTURE; PLASTIC DEFORMATION; POLYSILANES; PYROLYSIS; SILICON COMPOUNDS;

CONTINUOUS FIBER REINFORCED CERAMIC MATRIX COMPOSITES; MULLITE FILLER; POLYMER CONCENTRATION; POLYMER IMPREGNATION; POLYTITANOCARBOSILANE;

CERAMIC MATRIX COMPOSITES;

EID: 3142682994     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2004.00996.x     Document Type: Article

References (55)

1. R. J. Kerans and T. A. Parthasarathy, "Crack Deflection in Ceramic Composites and Fiber Coating Design Criteria," Composites, Part A, 30, 521-24 (1999).
2. R. J. Kerans, R. S. Hay, and N. J. Pagano, "The Role of the Fiber-Matrix Interface in Ceramic Composites," Am. Ceram. Soc. Bull., 68 [2] 429-42 (1989).
3. A. G. Evans and F. W. Zok, "Review: The Physics and Mechanics of Fiber-Reinforced Brittle-Matrix Composites," J. Mater. Sci., 29, 3857-96 (1994).
4. J. B. Davis, J. P. A. Lofvander, and A. G. Evans, "Fiber Coating Concepts for Brittle-Matrix Composites," J. Am. Ceram. Soc., 76 [5] 1249-57 (1993).
5. A. G. Evans, F. W. Zok, and J. B. Davis, "The Role of Interface in Fiber-Reinforced Brittle-Matrix Composites," Compos. Sci. Technol., 42, 3-24 (1991).
6. N. J. Pagano, "On the Micromechanical Failure Model in a Class of Ideal Brittle-Matrix Composites, Part 1. Coated-Fiber Composites," Composites, Part B, 29B, 93-119 (1998).
7. N. J. Pagano, "On the Micromechanical Failure Model in a Class of Ideal Brittle-Matrix Composites, Part 2. Uncoated-Fiber Composites," Composites, Part B, 29B, 121-30 (1998).
8. D. B. Marshall and A. G. Evans, "Failure Mechanisms in Ceramic-Fiber/Ceramic-Matrix Composites," J. Am. Ceram. Soc., 68 [5] 225-31 (1985).
9. A. G. Evans, M. Y. He, and J. W. Hutchinson, "Interface Debonding and Fiber Cracking in Brittle-Matrix Composites," J. Am. Ceram. Soc., 72 [12] 2300-303 (1989).
10. M. D. Thouless, O. Sbaizero, L. S. Sigl, and A. G. Evans, "Effect of Interface Mechanical Properties on Pull Out in a SiC-Fiber-Reinforced Lithium Aluminum Silicate Glass-Ceramic," J. Am. Ceram. Soc., 72 [4] 525-32 (1989).
11. P. G. Charalambides and A. G. Evans, "Debonding Properties of Residually Stressed Brittle-Matrix Composite," J. Am. Ceram. Soc., 72 [5] 746-53 (1989).
12. J. Llora and R. N. Singh, "Influence of Fiber and Interfacial Properties on Fracture Behavior of Fiber-Reinforced Ceramic Composites," J. Am. Ceram. Soc., 74 [11] 2882-90 (1991).
13. K. K. Chawla, Z. R. Xu, and J.-S. Ha, "Processing, Structure, and Properties of Mullite Fiber/Mullite Matrix Composites," J. Eur. Ceram. Soc., 16, 293-99 (1996).
14. R. J. Yong and X. Yang, "Interfacial Failure in Ceramic Fiber/Glass Composites," Composites, Part A, 27A, 737-41 (1996).
15. K. A. Keller, T. Mah, T. A. Parthasarathy, and C. M. Cooke, "Fugitive Interfacial Carbon Coatings for Oxide/Oxide Composites," J. Am. Ceram. Soc., 83 [2] 329-36 (2000).
16. B. Bender, D. Shadwell, C. Bulik, L. Incorvati, and D. Lewis III, "Effect of Fiber Coatings and Composite Processings on Properties of Zirconia-Based Matrix-SiC Fiber Composites," Am. Ceram. Soc. Bull., 65 [2] 363-69 (1986).
17. C. A. Lewinsohn, C. H. Henager Jr., R. H. Jones, and J. I. Eldridge, "Measuring Interphase Recession by Fiber Push-In Testing," J. Am. Ceram. Soc., 84 [4] 866-68 (2001).
18. E. Boakye, R. S. Hay, and M. D. Petry, "Continuous Coating of Oxide Fiber Tows Using Liquid Precursors: Monazite Coatings on Nextel 720™," J. Am. Ceram. Soc., 82 [9] 2321-31 (1999).
19. D.-H. Kuo, W. M. Kriven, and T. J. Mackin, "Control of Interfacial Properties through Fiber Coating Monazite Coatings in Oxide/Oxide Composites," J. Am. Ceram. Soc., 80 [12] 2987-96 (1997).
20. P. E. D. Morgan and D. B. Marshall, "Functional Interfaces for Oxide/Oxide Composites," Mater. Sci. Eng., A, 162, 15-25 (1993).
21. T. A. Parthasarathy, E. Boakye, M. Cinibulk, and M. D. Petry, "Fabrication and Testing of Oxide/Oxide Microcomposites with Monazite and Hibonite as Interlayers," J. Am. Ceram. Soc., 82 [12] 3575-83 (1999).
22. T. R. Mawdsley, D. Kovar, and J. W. Halloran, "Fracture Behavior of Alumina/Monazite Multilayer Laminate," J. Am. Ceram. Soc., 83 [4] 802-808 (2000).
23. P. E. D. Morgan and D. B. Marshall, "Ceramic Composites of Monazite and Alumina," J. Am. Ceram. Soc., 78 [6] 1553-63 (1995).
24. M. G. Cain, R. L. Cain, M. H. Lewis, and J. Gent, "In Situ Reaction Rare-Earth Hexaaluminate Interphases," J. Am. Ceram. Soc., 80 [7] 1873-76 (1997).
25. M. K. Cinibulk and R. S. Hay, "Textured Magnetoplumbite Fiber-Matrix Interphase Derived from Sol-Gel Fiber Coatings," J. Am. Ceram. Soc., 79 [5] 1233-46 (1996).
26. N. Iyi, S. Takekawa, and S. Kimura, "Crystal Chemistry of Hexaaluminates: β-Alumina and Magnetoplumbite Structure," J. Solid State Chem., 83, 8-9 (1989).
27. 2 and Monazite Coating Using Nextel™ 720-Fiber-Reinforced Blackglass™ Minicomposites," J. Am. Ceram. Soc., 84 [7] 1526-32 (2001).
28. P. Colomban, E. Bruneton, J. L. Langrange, and E. Mouchon, "Sol-Gel Mullite Matrix-SiC and Mullite 2D Woven Fabric Composites with or without Zirconia Coating Interphase: Elaboration and Properties," J. Eur. Ceram. Soc., 16 [2] 301-14 (1996).
29. O. Sudre, A. G. Razzell, L. Molliex, and M. Holmquist, "Alumina Single-Crystal Fiber-Reinforced Alumina-Matrix for Combustor Tiles," Ceram. Eng. Sci. Proc., 19 [4] 273-80 (1998).
30. R. J. Kerans and T. A. Parthasarathy, "Theoretical Analysis of the Fiber Pullout and Pushout Tests," J. Am. Ceram. Soc., 74 [7] 1585-96 (1991).
31. P. D. Jero, R. J. Kerans, and T. A. Parthasarathy, "Effect of Interfacial Roughness on the Frictional Stress Measured Using Pushout Tests," J. Am. Ceram. Soc., 74 [11] 2793-801 (1991).
32. R. J. Kerans, "The Role of Coating Compliance and Fiber/Matrix Interfacial Topography on Debonding in Ceramic Composites," Scr. Metall., 32 [4] 505-509 (1995).
33. R. J. Kerans, "Viability of Oxide Fiber Coatings in Ceramic Composites for Accommodation of Misfit Stresses," J. Am. Ceram. Soc., 79 [6] 1664-68 (1996).
34. T. A. Parthasarathy, D. R. Barlage, P. D. Jero, and R. J. Kerans, "Effect of Interfacial Roughness Parameters on the Fiber Push Out Behavior of Model Composite," J. Am. Ceram. Soc., 77 [12] 3232-36 (1994).
35. J. X. Li, Y. Matsuo and S. Kimura, "The Role of Fiber Coating on SiC-Fiber-Reinforced Alumina Composite," J. Ceram. Soc. Jpn., 100 [4] 499-503 (1992).
36. C. Droillard and J. Lamon, "Fracture Toughness of 2-D-Woven SiC/SiC CVI-Composites with Multilayered Interphases," J. Am. Ceram. Soc., 79 [4] 849-58 (1996).
37. T. K. Jacobsen and P. Brondsted, "Mechanical Properties of Two Plain-Woven Chemical Vapor Infiltrated Silicon Carbide-Matrix Composites," J. Am. Ceram. Soc., 84 [5] 1043-51 (2001).
38. Y. Hirata, T. Matsura, and K. Hayata, "Infiltration and Pyrolysis of Polytitano-carbosilane in a Si-Ti-C-O Fabric/Mullite Porous Composite," J. Am. Ceram. Soc., 83 [5] 1044-48 (2000).
39. T. Ogasawara, T. Ishikawa, H. Ito, N. Watanabe, and I. J. Davies, "Multiple Cracking and Tensile Behavior for an Orthogonal 3-D Woven Si-Ti-C-O Fiber/Si-Ti-C-O Matrix Composite," J. Am. Ceram. Soc., 84 [7] 1565-74 (2001).
40. S. Guo and Y. Kagawa, "Temperature Dependence of Tensile Strength for a Woven Boron Nitride-Coated Hi-Nicalon SiC-Fiber-Reinforced Silicon Carbide-Matrix Composite," J. Am. Ceram. Soc., 74 [7] 1585-96 (1991 ).
41. G. Morscher, P. Pirouz, and A. H. Heuer, "Temperature Dependence of Interfacial Shear Strength in SiC-Fiber-Reinforced Reaction-Bonded Silicon Nitride," J. Am. Ceram. Soc., 73 [3] 713-20 (1990).
42. D. Holz, S. Pagel, C. Bowen, S. Wu, and N. Claussen, "Fabrication of Low-to-Zero Shrinkage Reaction-Bonded Matrix Composites," J. Eur. Ceram. Soc., 16 [2] 255-60 (1996).
43. Y. Hirata, R. Yamashita, M. Matsuda, and M. Shibuya, "Observation of Interfaces of Si-Ti-C-O Fiber/Mullite Matrix Composites by Analytical Transmission Electron Microscopy," J. Ceram. Soc. Jpn., 103 [11] 1197-200 (1995).
44. Y. Hirata, R. Yamashita, and M. Shibuya, "Microstructure and Crack Extension of Laminated Si-Ti-C-O Fiber/Mullite Matrix Composites," Mater. Chem. Phys., 69, 252-60 (2001).
45. M. Schmücker, F. Flucht, and H. Shneider, "High-Temperature Behavior of Polycrystalline Aluminosilicate Fibers with Mullite Bulk Composition. I. Microstructure and Strength Properties," J. Eur. Ceram. Soc., 16 [2] 281-85 (1996).
46. R. Dong and Y. Hirata, "Processing of Ceria-Coated Alumina Fiber/Alumina Matrix Composite," J. Ceram. Soc. Jpn., 108 [9] 823-29 (2000).
47. Y. Kamino, Y. Hirata, and S. Sameshima, "Preparation and Mechanical Properties of Long Alumina Fiber/Alumina Matrix Composites," Mater. Lett., 28, 161-64 (1996).
48. R. Dong, H. Sueyoshi, M. Higo, Y. Uemura, and Y. Hirata, "Processing of SiC Fiber/Alumina-Mullite Matrix Composite," J. Ceram. Process. Res., 2 [2] 72-78 (2001).
49. Y. Nakamura, S. Kasuga, J. Nakamura, and Y. Hirata, "Mechanical Properties of Si-Ti-C-O Fabric/Polytitanocarbosilane/Mullite Laminated Composites"; pp. 721-27 in High-Temperature Ceramic-Matrix Composites. Edited by W. Krenkel, R. Naslain, and H. Shneider. Wiley-VCH, New York, 2001.
50. 3," J. Am. Ceram. Soc., 58 [11-12] 507-12 (1975).
51. I. A. Aksay, D. M. Dabbs, and M. Sarikaya, "Mullite for Structural, Electronic, and Optical Applications," J. Am. Ceram. Soc., 74 [10] 2343-58 (1991).
52. S. Somiya and Y. Hirata, "Mullite Powder Technology and Application in Japan," Am. Ceram. Soc. Bull., 70, 1624-32 (1991).
53. Y. Hirata and K. Takeshima, "Effects of Particle Classification on Colloidal Processing of Mullite," Mater. Lett., 16, 169-74 (1993).
54. R. Dong, Y. Hirata, H. Sueyoshi, M. Higo, and Y. Uemura, "Polymer Impregnation and Pyrolysis (PIP) Method for the Preparation of Laminated Woven Fabric/Mullite Matrix Composites with Pseudoductility," J. Eur. Ceram. Soc., 24 [1] 53-64 (2004).
55. B. Lawn, Fracture of Brittle Solids, 2nd Ed., Cambridge Solid State Science Series; pp. 51-56. Cambridge University Press, Cambridge, U.K., 1993.