Mechanical Properties of Two Plain-Woven Chemical Vapor Infiltrated Silicon Carbide-Matrix Composites

Journal of the American Ceramic Society

Volumn 84, Issue 5, 2001, Pages 1043-1051

  Jacobsen, Torben K ^a   Brøndsted, Povl ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

Author keywords

[No Author keywords available]

Indexed keywords

ANISOTROPY; CARBON FIBERS; COMPRESSIVE STRESS; CRACKS; ELASTIC MODULI; ELASTICITY; INTERFACES (MATERIALS); POROSITY; SILICON CARBIDE; TENSILE STRESS;

CHEMICAL VAPOR INFILTRATION; CROSS-PLY LAMINATE; INTERLAMINAR CRACKS; SILICON CARBIDE MATRIX COMPOSITE;

CERAMIC MATRIX COMPOSITES;

EID: 0035353959     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1151-2916.2001.tb00788.x     Document Type: Article

References (51)

1. J. Aveston, G. A. Cooper, and A. Kelly, "Single and Multiple Failure"; pp. 15-26 in The Properties of Fiber Composite, Conference Proceedings. IPC Science and Technology Press, Guildford, U.K, 1971.
2. D. B. Marshall, B. N. Cox, and A. G. Evans, "The Mechanics of Matrix Cracking in Brittle-Matrix Fiber Composites," Acta Metall., 33, 2013-21 (1985).
3. B. Budiansky, A. G. Evans, and J. W. Hutchinson, "Matrix Fracture in Fiber-Reinforced Ceramics," J. Mech. Phys. Solids, 34, 167-78 (1986).
4. C. Cho, J. W. Holmes, and J. R. Barber, "Estimation of Interfacial Shear in Ceramic Composites from Frictional Healing Measurements," J. Am. Ceram. Soc., 74 [11] 2802-808 (1991).
5. A. W. Pryce and P. Smith, "Modelling the Stress/Strain Behavior of Unidirectional Ceramic Matrix Composite Laminates," J. Mater. Sci., 27, 2695-704 (1992).
6. A. G. Evans and F. W. Zok, "Review, The Physics and Mechanics of Fibre-Reinforced Brittle Matrix Composites," J. Mater. Sci., 29, 3857-96 (1994).
7. J. M. Sánchez, M. R. Elizalde, A. M. Daniel, J. M. Martínez-Esnaola, I. Puente, and A. Martín, "Interfacial Characterization of 2D Woven SiC/SiC and Cross-Ply 0°/90° CAS/SiC Composites," Composites, Part A, 27A, 787-92 (1996).
8. D. B. Marshall and W. Oliver, "Measurements of Interfacial Mechanical Properties in Fiber-Reinforced Ceramic Composites," J. Am. Ceram. Soc., 70, 542 (1987).
9. A. G. Evans, F. W. Zok, and J. Davis, "The Role of Interfaces in Fiber-Reinforced Brittle Matrix Composites," Comp. Sci. Technol., 42, 3-24 (1991).
10. D. B. Marshall, "Analysis of Fiber Debonding and Sliding Experiments in Brittle Matrix Composites," Acta Metall. Mater., 40 [3] 427-41 (1992).
11. J. Lamon, F. Rebillat, and A. G. Evans, "Microcomposite Test Procedure for Evaluating the Interface Properties of Ceramic-Matrix Composites," J. Am. Ceram. Soc., 78 [2] 401-405 (1995).
12. J.-M. Domergue, F. E. Heredia, and A. G. Evans, "Hysteresis Loops and the Inelastic Deformation of 0/90 Ceramic-Matrix Composites," J. Am. Ceram. Soc., 79 [1] 161-70 (1996).
13. I. M. Daniel and G. Anastassopoulos, "Failure Mechanisms and Damage Evolution in Cross-Ply Ceramic Matrix Composites," Int. J. Solids Struct., 32 [3-4] 341-55 (1994).
14. K. W. Garrett and J. E. Bailey, "Multiple Transverse Fracture in 90° Cross-Ply Laminates of a Glass-Fibre-Reinforced Polyester," J. Mater. Sci., 12, 157-68 (1977).
15. D. S. Beyerle, S. M. Spearing, and A. G. Evans, "Damage Mechanisms and the Mechanical Properties of a Laminated 0/90 Ceramic-Matrix Composite," J. Am. Ceram. Soc., 75 [12] 3321-30 (1992).
16. P. G. Karandikar and T.-W. Chou, "Characterization and Modeling of Microcracking and Elastic Moduli Changes in Nicalon/CAS Composites," Comp. Sci. Technol., 46, 253-63 (1993).
17. A. W. Pryce and P. Smith, "Matrix Cracking in Cross-Ply Ceramic Matrix Composites under Quasi-Static and Cyclic Loading," Acta Metall. Mater. 42, 861-70 (1994).
18. Z. C. Xia, R. R. Carr, and J. W. Hutchinson, "Transverse Cracking in Fiber-Reinforced Brittle Matrix, Cross-Ply Laminates," Acta Metall. Mater. 41 [8] 2365-76 (1993).
19. L. N. McCartney, "Theory of Stress Transfer in a 0-90-0 Cross-Ply Laminate Containing a Parallel Array of Transverse Cracks," J. Mech. Phys. Solids, 40 [1] 27-68 (1992).
20. Z. Hashin, "Analysis of Cracked Laminates: A Variational Approach," Mech. Mater., 4, 121-36 (1985).
21. P. W. M. Peters, E. Martin, and P. Pluvinage, "Influence of Porosity and Fiber Coating on Engineering Elastic Moduli of Fiber-Reinforced Ceramics (SiC/SiC)," J. Am. Ceram. Soc., 78, 108-14 (1995).
22. T. J. Lu and J. W. Hutchinson, "Thermal Conductivity and Expansion of Cross-Ply Composites with Matrix Cracks," J. Mech. Phys. Solids, 43 [8] 1175-98 (1995).
23. W.-S. Kou and T.-W. Chou, "Modeling of Nonlinear Constitutive Relations of Woven Ceramic Composites," Ceram. Eng. Sci. Proc., 12 [7-8] 1556-73 (1991).
24. W.-S. Kou and T.-W. Chou, "Elastic Response and Effect of Transverse Cracking in Woven Fabric Brittle Matrix Composites," J. Am. Ceram. Soc., 78 [3] 783-92 (1995).
25. D. Sygulla, A. Mühlratzer, and P. Agatonovic, "Integrated Approach in Modelling, Testing, and Design of Gradient-CVI-Derived CMC Components," AGARD Report No. 795, Antalya, Turkey, Nov. 1993.
26. P. Pluvinage, A. Parvizi-Majidi, and T. W. Chou, "Damage Characterization of Two-Dimensional Woven and Three-Dimensional Braided SiC-SiC Composites," J. Mater. Sci., 31, 232-41 (1996).
27. Z. G. Wang, C. Laird, Z. Hashin, B. W. Rosen, and C.-F. Yen, "Mechanical Behaviour of a Cross-Weave Ceramic Matrix Composite - Part I Tensile and Compressive Loading," J. Mater. Sci., 26, 4751-58 (1991).
28. L. Guillaumat and J. Lamon, "Probabilistic Simulation of the Non-Linear Mechanical Behavior of a Woven SiC/SiC Composite," Comp. Sci. Technol., 56, 803-808 (1996).
29. E. Inghels and J. Lamon, "An Approach to the Mechanical Behaviour of SiC/SiC and C/SiC Ceramic Matrix Composites," J. Mater. Sci., 26, 5403-10 (1991).
30. X. Aubard, J. Lamon, and O. Allix, "Model of the Nonlinear Mechanical Behavior of 2D SiC-SiC Chemical Vapor Infiltration Composites," J. Am. Ceram. Soc., 77 [8] 2118-26 (1996).
31. A. Gasser, P. Ladevéze, and M. Poss, "Damage Mechanisms of a Woven SiC/SiC Composite: Modelling and Identification," Comp. Sci. Technol., 56, 779-84 (1996).
32. G. Camus and J.-E. Barbier, "Tensile Behavior of a 2D Woven C/SiC Composite at Ambient and Elevated Temperatures"; pp. 407-18 in Ceramic Transactions, Vol. 57, High-Temperature Ceramic-Matrix Composites I: Design, Durability, and Performance. Edited by A. G. Evans and R. Naslain. American Ceramic Society, Westerville, OH, 1995.
33. S. Baste, "Damage Mechanisms in CMCs As-Assessed by Ultrasonic Measurements"; see Ref. 32, pp. 131-40.
34. J. L. Chaboche, P. M. Lesne, and J. F. Maire, "Macroscopic Modeling and Damage Processes in CMCs"; see Ref. 32, pp. 65-75.
35. J. W. Hutchinson and H. M. Jensen, "Models of Fiber Debonding and Pullout in Brittle Composites with Friction," Mech. Mater., 9, 139-63 (1990).
36. A. G. Evans, J.-M. Domergue, and E. Vagaggini, "Methodology for Relating the Tensile Constitutive Behavior of Ceramic-Matrix Composites to Constituent Properties," J. Am. Ceram. Soc., 77 [6] 1425-35 (1994).
37. E. Vagaggini, J.-M. Domergue, and A. G. Evans, "Relationships between Hysteresis Measurements and the Constituent Properties of Ceramic-Matrix Composites: I, Theory," J. Am. Ceram. Soc., 78 [10] 2709-20 (1995).
38. M. Y. He, B.-X. Wu, A. G. Evans, and J. W. Hutchinson, "Inelastic Strains due to Matrix Cracking in Unidirectional Fiber-Reinforced Composites," Mech. Mater., 18, 213-29 (1994).
39. T. J. Lu and J. W. Hutchinson, "Effect of Matrix Cracking and Interface Sliding on the Thermal Expansion of Fibre-Reinforced Composites," Composites, 26, 403-14 (1995).
40. J.-L. Bobet, R. Naslain, A. Guette, N. Ji, and J.-L. Lebrun, "Thermal Residual Stresses in Ceramic Matrix Composites - II., Experimental Results for Model Materials," Acta Metall. Mater., 43 [6] 2255-68 (1995).
41. N. Iosipescu, "New Accurate Procedure for Single Shear Testing of Metals," J. Mater., 2 [3] 537-66 (1967).
42. S. S. Wang and A. Dasgupta, "Development of Iosipescu-Type Test for Determining In-Plane Shear Properties of Fiber Composite Materials: Critical Analysis and Experiment," Report No. UILU-ENG-86-5021, Department of Theoretical and Applied Mechanics. University of Illinois at Urbana-Champaign, IL, 1986.
43. P. Brøndsted, F. E. Heredia, and A. G. Evans, "In-Plane Shear Properties of 2-D Ceramic-Matrix Composites," J. Am. Ceram. Soc., 77 [10] 2569-74 (1994).
44. A. Burr, F. Hild, and F. A. Leckie, "Micro-mechanics and Continuum Damage Mechanics," Arch. Appl. Mech., 65, 1-20 (1995).
45. T. K. Jacobsen, "The Influence of Holes and Notches on the Fatigue Behavior of 2-D Woven Ceramic Matrix Composites"; Ph.D. Dissertation. Risø National Laboratory, Denmark, 1997.
46. B. N. Cox and D. B. Marshall, "Crack Initiation in Fiber-Reinforced Brittle Laminates," J. Am. Ceram. Soc., 79 [5] 1181-88 (1996).
47. J.-L. Bobet and J. Lamon, "Thermal Residual Stresses in Ceramic Matrix Composites - I., Axisymmetrical Model and Finite Element Analysis," Acta Metall. Mater., 43 [6] 2241-53 (1995).
48. W. P. Keith and K. T. Kedward, "The Stress-Strain Behavior of a Porous Unidirectional Ceramic Matrix Composite," Composites, 26, 163-74 (1995).
49. A. Dalmaz, R. Reynaud, D. Rouby, and G. Fantozzi, "Damage Propagation in Carbon/Silicon Carbide Composites During Tensile Tests Under the SEM," J. Mater. Sci., 31, 4213-19 (1996).
50. H. M. Hsiao and J. M. Daniel, "Effect of Fiber Waviness on Stiffness and Strength Reduction of Unidirectional Composites Under Compressive Loading," Comp. Sci. Technol., 56, 581-93 (1996).
51. A. S. Argon, Treatise on Materials Science and Technology, Vol. 1; p. 79, Academic Press, New York, 1972.