7th World Congress of Chemical Engineering: A review

Chemical Engineering Research and Design

Volumn 83, Issue 12 A, 2005, Pages 1345-1360

  Grant, Colin ^a   Bogle, David ^b   Slater, Nigel ^c   Darton, Richard ^d   Fryer, Peter ^e   Williams, Richard ^f   Nichols, John ^g   Ocone, Raffaella ^h   Shallcross, David ⁱ   Guy, Keith ^j  

^a UNIVERSITY OF STRATHCLYDE   (United Kingdom)

^b UNIVERSITY COLLEGE LONDON   (United Kingdom)

^c UNIVERSITY OF CAMBRIDGE   (United Kingdom)

^d UNIVERSITY OF OXFORD   (United Kingdom)

^e UNIVERSITY OF BIRMINGHAM   (United Kingdom)

^f UNIVERSITY OF LEEDS   (United Kingdom)

^g Foster Wheeler Energy Limited UK   (United Kingdom)

^h HERIOT WATT UNIVERSITY   (United Kingdom)

ⁱ UNIVERSITY OF MELBOURNE   (Australia)

^j Spiritus Consulting   (United Kingdom)

more..

Author keywords

[No Author keywords available]

Indexed keywords

CHEMICAL ENGINEERING; ENGINEERING EDUCATION; ENGINEERING RESEARCH; MOLECULES; SOCIETIES AND INSTITUTIONS;

ACADEMIC RESEARCH; EUROPEAN FEDERATION OF CHEMICAL ENGINEERS (CO); INSTITUTION OF CHEMICAL ENGINEERS (CO);

TECHNICAL PRESENTATIONS;

CHEMICAL ENGINEERING; ENGINEERING EDUCATION; ENGINEERING RESEARCH; MOLECULES; SOCIETIES AND INSTITUTIONS; TECHNICAL PRESENTATIONS;

EID: 30744466389     PISSN: 02638762     EISSN: None     Source Type: Journal    
DOI: 10.1205/cherd.mi.0512     Document Type: Article

References (77)

1. Alabi, S.I., Morris, A.J. and Martin, E.B., 2005, On-line dynamic process monitoring using wavelet-based generic dissimilarity measure, Trans IChemE, Part A, Chem Eng Res Des, 83(A6): 698-705.
2. Aguilera, J.M., 2005, Food material science: building the right microstructures, 7th World Congress of Chemical Engineering Proceedings, O90A-001 (IChemE, ISBN 0 85295 494 8).
3. Arizmendi-Sanchez, J.A. and Sharratt, P.N., 2005, Phenomenological modelling approach to support the implementation of process intensification in process design, 7th World Congress of Chemical Engineering Proceedings, 097-002 (IChemE, ISBN 0 85295 494 8).
4. Barton, M. and Petrie, J.G., 2005, Small, agile and dynamic - how to succeed as a small chemical engineering department in a changing global environment, 7th World Congress of Chemical Engineering Proceedings, C34-004 (IChemE, ISBN 0 85295 494 8).
5. Bebbington, J., 2005, Integrating sustainable development into project management processes, 7th World Congress of Chemical Engineering Proceedings, O56-001 (IChemE, ISBN 0 85295 494 8).
6. Bush, S.F., 2005, A techno-economic model applied to the development of new products and improved processes, Trans IChemE, Part A, Chem Eng Res Des, 83(A6): 646-654.
7. Clift, R., 2005, Nanotechnology: an example of risk management and regulation in an emerging technology, 7th World Congress of Chemical Engineering Proceedings, O67-002 (IChemE, ISBN 0 85295 494 8).
8. Cockshott, J.E., 2005, Probability bow-ties: a transparent risk management tool, Trans IChemE, Part B, Process Safety and Environmental Protection, 83(B4), 307-316.
9. Collier, J.R., Morton, S.A., Rogers, T.B., Collier, B.J., McEwan, J. and Reynier, M., 2005, Making scotch: engineering, chemistry, and education, 7th World Congress of Chemical Engineering Proceedings, O99-002 (IChemE, ISBN 0 85295 494 8).
10. Crosthwaite, C.A. and Cameron, I.T., 2005, Process and content - in pursuit of graduate attributes, 7th World Congress of Chemical Engineering Proceedings, C34-001 (IChemE, ISBN 0 85295 494 8).
11. Cussler, E. and Moggridge, G, 2005, Chemical product development, 7th World Congress of Chemical Engineering Proceedings, O55-001 (IChemE, ISBN 0 85295 494 8).
12. Cutlip, M.B., Shacham, M. and Elly, M., 2005, Efficient solution of numerical problems within Polymath and Excel, 7th World Congress of Chemical Engineering Proceedings, P20-018 (IChemE, ISBN 0 85295 494 8).
13. Debenedetti, P., 2005, Thermodynamics of glasses and supercooled liquids: from fundamentals to applications, 7th World Congress of Chemical Engineering Proceedings, O16-001 (IChemE, ISBN 0 85295 494 8).
14. Dijkema, G.P.J., van Zanten, D.J. and Grievink, J., 2005, Public roles and private interests in petrochemical clusters: model-based decision support of a Regional Development Agency, 7th World Congress of Chemical Engineering Proceedings, O123-001 (IChemE, ISBN 0 85295 494 8).
15. Double, J.M., Gourlay, B. and Atherton, J.H., 2005, Survey of process intensification equipment requirements, 7th World Congress of Chemical Engineering Proceedings, O156-003 (IChemE, ISBN 0 85295 494 8).
16. Douglas, J.M., 1988, The Conceptual Design of Chemical Processes, 108 (McGraw Hill, New York).
17. Etchells, J., 2005, Process intensification - a view from the Health and Safety Executive, 7th World Congress of Chemical Engineering Proceedings, O37-003 (IChemE, ISBN 0 85295 494 8).
18. Fitzgerald, K., 2005, Safety performance improvement through culture change, 7th World Congress of Chemical Engineering Proceedings, O10-003 (IChemE, ISBN 0 85295 494 8).
19. Fraser, D.M. and Linder, C., 2005, Learning through variation: a new way to view learning, 7th World Congress of Chemical Engineering Proceedings, P20-002 (IChemE, ISBN 0 85295 494 8).
20. Fraser, D.M., Linder, C., Case, J.M., Allison, S. and Coombes, H., 2005, Learning through computer simulation: application of variation theory, 7th World Congress of Chemical Engineering Proceedings, C35-003 (IChemE, ISBN 0 85295 494 8).
21. Fyfe, D., 2005, Spinouts of chemistry related businesses, Trans IChemE, Part A, Chem Eng Res Des, 83(A6): 596-602.
22. Gaidhani, H.K., McNeil, B. and Ni, X., 2005, Fermentation of pullulan using an oscillatory baffled reactor, Trans IChemE, Part A, Eng Res Des, 83(A6): 640-645.
23. Grant, C.D. and Dickson, B., 2005, Personal skills in chemical engineering graduates - does industry get what it needs or deserves?, 7th World Congress of Chemical Engineering Proceedings, O116-002 (IChemE, ISBN 0 85295 494 8).
24. Greager, I., Scholtz, J.H. and Desmet, M.A., 2005, Chemical opportunities from Sasol GTL, 7th World Congress of Chemical Engineering Proceedings, O144-001 (IChemE, ISBN 0 85295 494 8).
25. Hesketh, R., Slater, C.S. and Newell, J.A., 2005, Integrating green engineering throughout the curriculum to teach sustainable development, 7th World Congress of Chemical Engineering Proceedings, O83-004 (IChemE, ISBN 0 85295 494 8).
26. Higashitani, K., Kanda, Y. and Tamamoto, T., 2005, Nucleation and growth process in soap-free polymerization of styrene investigated by atomic force microscopy, 7th World Congress of Chemical Engineering Proceedings, O164-002 (IChemE, ISBN 0 85295 494 8).
27. Jiménez, L., Gauss, B., Bañares-Alcántara, R. and Wozny, G., 2005, E-learning in chemical engineering: similarities and contrasts of students and faculty members' preconceptions, 7th World Congress of Chemical Engineering Proceedings, P20-008 (IChemE, ISBN 0 85295 494 8).
28. Joergensen, K., Jensen, A.D., Bach, P. and Dam-Johansen, K., 2005, Effect of formulation ingredients on drying kinetics and morphology of particles formed during spray drying, 7th World Congress of Chemical Engineering Proceedings, O49-002 (IChemE, ISBN 0 85295 494 8).
29. Kavanagh, L. and Lant, P.A., 2005, Introduction to chemical product design - a hands-on approach, 7th World Congress of Chemical Engineering Proceedings, O83-001 (IChemE, ISBN 0 85295 494 8).
30. Kentish, S.E., Sharkey, A.G., Gravina, J.L. and Shallcross, D.C., 2005, Career destinations for chemical engineering postgraduates - does the training match the workplace need?, 7th World Congress of Chemical Engineering Proceedings, O116-001 (IChemE, ISBN 0 85295 494 8).
31. Kolb, G., Cominos, V., Hofmann, C., Pennemann, H., Schürer, J., Tiemann, D., Wichert, M., Zapf, R., Hessel, V. and Löwe, H., 2005, Integrated microstructured fuel processors for fuel cell applications, Trans IChemE, Part A, Chem Eng Res Des, 83(A6): 626-633.
32. Lehn, J.-M., 2005, Perspectives in supramolecular science and engineering, 7th World Congress of Chemical Engineering Proceedings, O1-001 (IChemE, ISBN 0 85295 494 8).
33. Lester, E., Blood, P., Poliakoff, M., Giddings, D., Denyer, J. and Azzopardi, B., 2005, Tailored nanoparticulate metal/metal oxides from a continuous supercritical water reactor, 7th World Congress of Chemical Engineering Proceedings, O135-002 (IChemE, ISBN 0 85295 494 8).
34. Lester, E., Schofield, D. and Wilson, T., 2005, Virtual reality interactive e-learning for chemical engineers, 7th World Congress of Chemical Engineering Proceedings, O48-003 (IChemE, ISBN 0 85295 494 8).
35. Lewin, G., 2005, 2005: an opportunity to change perceptions, The Chemical Engineer (tce), July 2005: 26.
36. Li, J., Ge, W., Zhang, J. and Kwauk, M., 2005, Multi-scale compromise and multi-level correlation in complex systems, Trans IChemE, Part A, Chem Eng Res Des, 83(A6), 574-582.
37. Li, Y., Kanda, Y., Shinto, H. and Higashitani, K., 2005, Fragile adsorbed layer on surface in electrolyte solution detected by dynamic method of AFM and its effect on zeta potential of solid surface, 7th World Congress of Chemical Engineering Proceedings, O27-002 (IChemE, ISBN 0 85295 494 8).
38. Liebermann, G., 2005, Lean six sigma and design for lean six sigma in process development, 7th World Congress of Chemical Engineering Proceedings, C43-002 (IChemE, ISBN 0 85295 494 8).
39. Liu, T., Gepert, V. and Veser, G., 2005, Process intensification through heat-integrated reactors for high-temperature millisecond contact-time catalysis, Trans IChemE, Part A, Chem Eng Res Des, 83(A6): 611-618.
40. Lodge, K.B., 2005, The programming of a microcontroller as an integral part of teaching process control to undergraduates in chemical engineering, 7th World Congress of Chemical Engineering Proceedings, P20-015 (IChemE, ISBN 0 85295 494 8).
41. McGlade, J., 2005, Eco-efficiency and innovation in chemical engineering, 7th World Congress of Chemical Engineering (not published in proceedings volume).
42. McGregor, C., Grové, J.J.C., Crause, C., Naudé, H. and Sharrock, C., 2005, Sasol's ModCoTM hydroformulation technology for the production of detergent range alcohols, 7th World Congress of Chemical Engineering Proceedings, 025-003 (IChemE, ISBN 0 85295 494 8).
43. Manathunga, C., Lant, P.A. and Mellick, G., 2005, RSVP - Research Student Virtual Portfolio, 7th World Congress of Chemical Engineering Proceedings, C34-005 (IChemE, ISBN 0 85295 494 8).
44. Marquardt, W. 2005, Model-based experimental analysis of kinetic phenomena in multi-phase reactive systems, Trans IChemE, Part A, Chem Eng Res Des, 83(A6), 561-573.
45. Matlosz, M., 2005, Multi-scale design: methods and tools for the sustainable chemical industry of the future, 7th World Congress of Chemical Engineering Proceedings, O148-001 (IChemE, ISBN 0 85295 494 8).
46. Melton, T., 2005, The benefits of lean manufacturing: what lean thinking has to offer the process industries, Trans IChemE, Part A, Chem Eng Res Des, 83(A6): 662-673.
47. Müller-Steinhagen, H., 2005, The contribution of renewable energies to a sustainable energy economy, 7th World Congress of Chemical Engineering Proceedings, O99-002 (IChemE, ISBN 0 85295 494 8).
48. Ng, F., Sultan, M., Jiang, M., Te, M., Smith, W.J., Hague, M., Watt, R. and Hodge, S., 2005, Avada: an innovative process for the production of ethyl acetate, 7th World Congress of Chemical Engineering Proceedings, O25-002 (IChemE, ISBN 0 85295 494 8).
49. Noble, D., 2005, Computational modelling of biological systems - the heart of the process, 7th World Congress of Chemical Engineering Proceedings, O68-001 (IChemE, ISBN 0 85295 494 8).
50. Obenndip, D.A. and Sharratt, P.N., 2005, Enhancing fine chemicals process chemistry: a practical approach, Trans IChemE, Part A, Chem Eng Res Des, 83(A6): 655-661.
51. Oliver, R., 2005, Chemical nanomanufacturing - prospects for the commercialisation of useful functional materials through chemical engineering futures, 7th World Congress of Chemical Engineering Proceedings, O159-001 (IChemE, ISBN 0 85295 494 8).
52. Ottino, J., 2005, From simple systems to complex systems: new problems, new tools, new opportunities, 7th World Congress of Chemical Engineering Proceedings, O90-001 (IChemE, ISBN 0 85295 494 8).
53. Papadopoulos, A.I. and Linke, P., 2005, Grid computing in integrated computer-aided solvent and process design, 7th World Congress of Chemical Engineering Proceedings, O121-003 (IChemE, ISBN 0 85295 494 8).
54. Perrier, M. and Stuart P.R., 2005, The Canadian Design Engineering Network (CDEN): design engineering through collaboration, infrastructure and knowledge sharing, 7th World Congress of Chemical Engineering Proceedings, O83-003 (IChemE, ISBN 0 85295 494 8).
55. Petrie, J., 2005, New models of sustainability for the resources sector, 7th World Congress of Chemical Engineering Proceedings, O147-001 (IChemE, ISBN 0 85295 494 8).
56. Plumb, K., 2005, Continuous processing in the pharmaceutical industry: changing the mind set, Trans IChemE, Part A, Chem Eng Res Des, 83(A6): 730-738.
57. Rafael, A.C. Teixeira, C.T., Ferreira, L.M., Bernardo, F. and Rasteiro, M.G., 2005, Virtual applications using a web platform to teach chemical engineering: the distillation case, 7th World Congress of Chemical Engineering Proceedings, P20-007 (IChemE, ISBN 0 85295 494 8).
58. Ricard, F., Brechtelsbauer, C., Xu, Y. and Lawrence, C., 2005, Monitoring of multi-phase pharmaceutical processes using electrical resistance tomography, Trans IChemE, Part A, Chem Eng Res Des, 83(A7): 794-805.
59. Richards, G.M., 2005, The changing role of engineers and the future of engineering education and training with special reference to the developing world, 7th World Congress of Chemical Engineering Proceedings, O160-001 (IChemE, ISBN 0 85295 494 8).
60. Russell, A., 2005, Seamless interfaces in tissue engineering and regenerative medicine, 7th World Congress of Chemical Engineering Proceedings, O29-001 (IChemE, ISBN 0 85295 494 8).
61. Scales, P.J., 2005, Effect of shear on particulate suspension dewatering, 7th World Congress of Chemical Engineering Proceedings, O75-003 (IChemE, ISBN 0 85295 494 8).
62. Seris, E.L.C., Abramowitz, G., Johnston, A.M. and Haynes, B.S., 2005, Demonstration plant for distributed production of hydrogen from steam reforming of methane, Trans IChemE, Part A, Chem Eng Res Des, 83(A6): 619-625.
63. Shallcross, D.C. and Parkinson, M.J., 2005, Teaching engineering ethics: some engineering class room scenarios, 7th World Congress of Chemical Engineering Proceedings, P20-001 (IChemE, ISBN 0 85295 494 8).
64. Shott, I. and Appleby C., 2005, An entrepreneurial adventure - introduction, 7th World Congress of Chemical Engineering Proceedings, O42-001 (IChemE, ISBN 0 85295 494 8).
65. Skelton, B., Bustnes, T.E. and Mackley, M.R., 2005, Development of the oscillatory flow based process for the production of biodiesel transport fuel, 7th World Congress of Chemical Engineering Proceedings, O12-003 (IChemE, ISBN 0 85295 494 8).
66. Smith, P.W., 2005, CCE-Multicontactor technology - new process intensification tool with major applications in the cleaning of bio-mass with energy recovery, 7th World Congress of Chemical Engineering Proceedings, C18-006 (IChemE, ISBN 0 85295 494 8).
67. Sparrow, O., 2005, Will the term 'the chemicals industry' still be useful in 2020?, 7th World Congress of Chemical Engineering Proceedings, O101-001 (IChemE, ISBN 0 85295 494 8).
68. Stephanopolous, G., 2005, Metabolic engineering in the post-genomic era, 7th World Congress of Chemical Engineering Proceedings, O2-001 (IChemE, ISBN 0 85295 494 8).
69. Svrcek, W.Y. and Young, B.R., 2005, Process control systems education in a hands on real time environment, 7th World Congress of Chemical Engineering Proceedings, P20-009 (IChemE, ISBN 0 85295 494 8).
70. Thien, M. and Paul, E., 2005, Development and manufacturing for processes requiring technological risk, 7th World Congress of Chemical Engineering Proceedings, O43-001 (IChemE, ISBN 0 85295 494 8).
71. Thomas, H., 2005, Transforming the pharmaceutical business: lean thinking applied to pharmaceutical manufacturing, 7th World Congress of Chemical Engineering Proceedings, O74-002 (IChemE, ISBN 0 85295 494 8).
72. Thomas, P., 2005, The use of innovative continuous processes in bulk active pharmaceutical ingredient manufacture as a means to reduce cost, improve quality and reduce environmental impact, 7th World Congress of Chemical Engineering Proceedings, O74-001 (IChemE, ISBN 0 85295 494 8).
73. Tonkovich, A., Kuhlmann, D., Rogers, A., McDaniel, J., Fitzgerald, S., Arora, R. and Yuschak, T., 2005, Microchannel technology scale-up to commercial capacity, Trans IChemE, Part A, Chem Eng Res Des, 83(A6): 634-639.
74. Trau, M., 2005, Drug and gene nano-balls: displaying and screening massive biomolecular libraries on colloidal surfaces, 7th World Congress of Chemical Engineering Proceedings, O4-001 (IChemE, ISBN 0 85295 494 8).
75. Vedrina, D.S., Galinec, G. and Božičević, J., 2005, Distributed laboratory for process control and teaching - LabTEx-Sys, 7th World Congress of Chemical Engineering Proceedings, P20-010 (IChemE, ISBN 0 85295 494 8).
76. Wright, F.L., 2005, Introducing emerging technologies and the current gap in development funding: a conundrum, 7th World Congress of Chemical Engineering Proceedings, O103-001 (IChemE, ISBN 0 85295 494 8).
77. Zhao, H., Wang, Y.D. and Liu, Z., 2005, Chemical engineering education in Tsinghua University - challenges and opportunities, 7th World Congress of Chemical Engineering Proceedings, P20-012 (IChemE, ISBN 0 85295 494 8).