Third body formation on brake pads and rotors

Tribology International

Volumn 39, Issue 5, 2006, Pages 401-408

  Österle, Werner ^a   Urban, Ingrid ^a  

^a BAM FEDERAL INSTITUTE FOR MATERIALS RESEARCH AND TESTING   (Germany)

Author keywords

Brake; Friction film; Friction layer; Friction material; Third body

Indexed keywords

COMPOSITION; DEFORMATION; FRICTION; ROTORS; SURFACES;

CROSS SECTIONAL PREPARATION; METAL PARTICLES; SUPERFICIAL LAYERS;

BRAKES;

EID: 30344464990     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2005.04.021     Document Type: Article

References (36)

1. M. Godet The third-body approach: a mechanical view of wear Wear 100 1984 437 452
2. M. Eriksson, F. Bergman, and S. Jacobson Surface characterization of brake pads after running under silent and squealing conditions Wear 232 1999 163 167
3. M. Eriksson, and S. Jacobson Tribological surfaces of organic brake pads Tribol Int 33 2000 817 827
4. M. Eriksson, F. Bergmann, and S. Jacobson On the nature of tribological contact in automotive brakes Wear 252 2002 26 36
5. Odie;sterle W, Bettge D. Comparison of methods for the characterization of brake pad surfaces. Prakt Metallogr 2004;41:494 - 505.
6. W. Österle, and I. Urban Friction layers and friction films on PMC brake pads Wear 257 2004 215 226
7. G.P. Ostermeyer On the dynamics of the friction coefficient Wear 254 2003 852 858
8. Steffen, T. Contact FE model to simulate disc brake squeal. Presented at IMAC 2000. Orlando, USA.
9. H. Jang, J. Lee, and J.W. Fash Compositional effects of the brake friction material on creep groan phenomena Wear 251 2001 1477 1483
10. Kemmer HA. Investigation of the friction behaviour of automotive brakes through experiments and tribological modelling. PhD thesis. Robert Bosch GmbH Schriftenreihe, ISBN 3-00-011230-8; 2002.
11. P. Filip, Z. Weiss, and J. Rafaja On friction layer formation in polymer matrix composite materials for brake applications Wear 252 2002 189 198
12. D. Bettge, and J. Stracevic Topographic properties of the contact zones of wear surfaces in disc brakes Wear 254 2003 195 202
13. M.H. Cho, S.J. Kim, R.H. Basch, and J.W. Fash Tribological study of gray cast iron with automotive brake linings - the effect of rotor microstructure Tribol Int 35 2003 537 545
14. P.J. Blau, and H.M. Meyer Characteristics of wear particles produced during friction tests of conventional and unconventional disk brake materials Wear 255 2003 1261 1269
15. Mosleh M, Blau PJ, Dumitrescu D. Characteristics and morphology of wear particles from laboratory tester of disk brake materials. Wear 2004;256:1128 - 34.
16. Shorowordi KM, Hasseeb ASMA, Celis JP. Velocity effects on the wear, friction and tribo chemistry of aluminium MMC sliding against phenolic brake pad. Wear 2004;256:1176 - 81.
17. W. Odie;sterle, I. Urban, W. Gesatzke, and H. Rooch Characterization and evaluation of the formation of friction layers during braking with conventional PMC friction material against a cast iron rotor W. Bartz Proceedings 14th International Colloquium Tribology, Esslingen, Germany vol. 1 2004 Technische Akademie Esslingen Esslingen, Germany 483 489
18. A. Wirth, D. Eggleston, and R. Whitaker A fundamental tribochemical study of the third body layer formed during automotive friction braking Wear 179 1994 75 81
19. A. Muroga, and H. Saka Analysis of rolling contact fatigued microstructure using focused ion beam sputtering and transmission electron microscopy observation Scripta Metall Mater 33 1995 151 156
20. J. Schöfer, P. Rehbein, U. Stolz, D. Löhe, and H. Zum Gahr Formation of tribological films and white layers on self-mated bearing steel surfaces in boundary lubricated sliding contact Wear 248 2001 7 15
21. S. Chaiwan, M. Hoffmann, P. Munroe, and U. Stiefel Investigation of subsurface damage during sliding wear of alumia using FIB milling Wear 252 2002 531 539
22. F. Altmann FIB-pinpointed preparation of TEM samples by a needle based manipulator (lift-out) technique Prakt Metallogr 49 2003 175 183
23. R. Spolanek, B. Heiland, C. Witt, R.M. Keller, P. Müllner, and E. Arzt The preparation of TEM specimens using Focused Ion Beam (FIB) systems Prakt Metallogr 37 2000 90 101
24. D.L.A. De Faria, S. Venancio Silca, and M.T. De Oliveira Raman spectroscopy of some iron oxides and oxyhydroxides J Raman Spectrosc 28 1997 873 878
25. R. Krueger Dual-column (FIB-SEM) wafer applications Micron 30 1999 221 226
26. A. Scharmann, and W. Kriegseis Exoelectron emission. Microscopic aspects of adhesion and lubrication J.M. Georges Tribology Series 7 1982 Elsevier Amsterdam 489 506
27. Holzapfel G, Lesz J, Otto W. Tribo-Exoemission from some silicate minerals. Radiation Protection Dosimetry 4, No.3, 243-6.
28. W. Österle, M. Griepentrog, Th. Gross, and I. Urban Chemical and microstructural changes induced by friction and wear of brakes Wear 251 2001 1469 1476
29. M. Furukawa, Z. Horita, and T. Langdon Developing ultrafine grain sizes using severe plastic deformation Adv Eng Mater 3 2001 121 123
30. T.F.J. Quinn, J.L. Sullivan, and D.M. Rowson Origins and development of oxidational wear at low ambient temperatures Wear 94 1984 175 191
31. W.M. Rainforth, A.J. Leonard, C. Perrin, A. Bedolla-Jacuinde, Y. Wang, H. Jones, and Q. Luo High resolution observations of friction-induced oxide and its interaction with the worn surface Tribol Int 35 2002 731 748
32. H. So, D.S. Yu, and C.Y. Chuang Formation and wear mechanism of tribo-oxides and the regime of oxidational wear of steel Wear 253 2002 1004 1015
33. V.L. Popov, S.G. Psakhie, A. Dimitrev, and E. Shilko Quasi-fluid nano-layers at the interface between rubbing bodies: simulations by movable cellular automata Wear 254 2003 901 906
34. M. Scherge, D. Shakhvorostov, and K. Pöhlmann On the measurement of nano-wear events W. Bartz Proceedings 14th International Colloquium Tribology vol. 1 2004 Technische Akademie Esslingen Esslingen, Germany 1 4
35. Melcher B, Faullant P. A comprehensive study of chemical and physical properties of metal sulfides. SAE Technical Paper 2000-01-2757: 39-49.
36. Österle W, Urban I, Kleinlein H, Loemba A. Trepte S. Reibschichtbildung und mögliche Einflüsse auf Reibschwingungen bei einem Bahn-Bremsbelag. VDI-Berichte 1736 Reibung und Schwingungen in Fahrzeugen, Maschinen und Anlagen VDI-Verlag Düsseldorf 2002; 283-96.