Impingement of acetabular cups in a hip simulator: Comparison of highly cross-linked and conventional polyethylene

Journal of Arthroplasty

Volumn 20, Issue SUPPL. 3, 2005, Pages 77-86

  Holley, Keith G ^a,b   Furman, Bridgette D ^a   Babalola, Omotunde M ^a   Lipman, Joseph D ^a   Padgett, Douglas E ^a   Wright, Timothy M ^a  

^a HOSPITAL FOR SPECIAL SURGERY   (United States)

^b NAVAL MEDICAL CENTER SAN DIEGO   (United States)

Author keywords

Cross linking; Hip simulator; Impingement; Polyethylene; Total hip arthroplasty

Indexed keywords

POLYETHYLENE;

ACETABULAR CUP; CONFERENCE PAPER; CROSS LINKING; GAMMA IRRADIATION; HIP; HIP PROSTHESIS; MOLECULAR WEIGHT; PHYSICAL CHEMISTRY; RADIATION EXPOSURE; SIMULATOR;

ACETABULUM; BIOMECHANICS; HIP PROSTHESIS; MATERIALS TESTING; POLYETHYLENES; PROSTHESIS DESIGN; PROSTHESIS FAILURE;

EID: 26444582223     PISSN: 08835403     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.arth.2005.04.026     Document Type: Conference Paper

References (30)

1. O.K. Muratoglu, C.R. Bragdon, and D.O. O'Connor A novel method of cross-linking ultra-high-molecular-weight polyethylene to improve wear, reduce oxidation, and retain mechanical properties. Recipient of the 1999 HAP Paul award J Arthroplasty 16 2001 2
2. H. McKellop, F.W. Shen, and B. Lu Development of an extremely wear-resistant ultra high molecular weight polyethylene for total hip replacements J Orthop Res 17 1999 2
3. H. Oonishi, I.C. Clarke, and K. Yamamoto Assessment of wear in extensively irradiated UHMWPE cups in simulator studies J Biomed Mater Res A 68 2004 1
4. D.A. Baker, A. Bellare, and L. Pruitt The effects of degree of crosslinking on the fatigue crack initiation and propagation resistance of orthopedic-grade polyethylene J Biomed Mater Res 66A 2003 1
5. J.C. Cole, J.E. Lemons, and A.W. Eberhardt Gamma irradiation alters fatigue-crack behavior and fracture toughness in 1900H and GUR 1050 UHMWPE J Biomed Mater Res 63 2002 5
6. A.M. Gillis, J.J. Schmieg, and S. Bhattacharyya An independent evaluation of the mechanical, chemical, and fracture properties of UHMWPE cross-linked by 34 different conditions Proceedings of the Forty-fifth Annual Meeting of the Orthopaedic Research Society vol 24 1999 908
7. M. Endo, J.L. Tipper, and D.C. Barton Comparison of wear, wear debris and functional biological activity of moderately crosslinked and non-crosslinked polyethylenes in hip prostheses Proc Inst Mech Eng [H] 216 2002 2
8. M. Yamaguchi, T. Akisue, and T.W. Bauer The spatial location of impingement in total hip arthroplasty J Arthroplasty 15 2000 3
9. A.P. Bennett, T.M. Wright, and S. Li Global Reference UHMWPE: characterization and comparison to commercial UHMWPE Proceedings of the Forty-second Annual Meeting of the Orthopaedic Research Society vol 21 1996 472
10. B. Furman, S. Agner, and S. Li Is there a difference in wear properties of commercially available crosslinked UHMWPE? Proceedings of the Forty-eighth Annual Meeting of the Orthopaedic Research Society, Dallas (TX) vol 27 2002 1038
11. M. Scott, W. Sauer, and M. Anthony Validation of an alternative method for isolating UHMWPE wear debris from joint simulator serum Society for Biomaterials, 6th World Biomaterials Congress vol 177 2000
12. J. Lipman, D.E. Padgett, and B.H. Robie Total hip component design and orientation influences range of motion and dislocation rate Proceedings of the Forty-sixth Annual Meeting of the Orthopaedic Research Society 1998 830
13. W.Y. Shon, T.M. Wright, and T. Baldini Impingement in total hip arthroplasty: a study of retrieved components Proceedings of the Forty-seventh Annual Meeting of the Orthopaedic Research Society, San Francisco (CA) 2001
14. M. Kligman, D.E. Padgett, and B.D. Furman Polyethylene wear opposite to impingement site in retrieved acetabular cups Proceedings of the Fiftieth Annual Meeting of the Orthopaedic Research Society, San Francisco (CA) vol 29 2004 1459
15. G.H. Isaac, B.M. Wroblewski, and J.R. Atkinson A tribological study of retrieved hip prostheses Clin Orthop 276 1992 115
16. V. Saikko, O. Calonius, and J. Keranen Wear of conventional and cross-linked ultra-high-molecular-weight polyethylene acetabular cups against polished and roughened CoCr femoral heads in a biaxial hip simulator J Biomed Mater Res 63 2002 6
17. H. McKellop, F.W. Shen, and W. DiMaio Wear of gamma-crosslinked polyethylene acetabular cups against roughened femoral balls Clin Orthop 369 1999 73
18. S.A. Maher, B. Furman, and T.M. Wright The effect of reduced fracture toughness on pitting and delamination wear of elevated cross-linked polyethylene S.M. Kurtz R. Gsell J. Martell Crosslinked and thermally treated ultra-high molecular weight polyethylene for joint replacements ASTM STP vol 1445 2004 ASTM International West Conshohocken (Pa) 137
19. T.H. Baldini, T.M. Wright, and J.A. Estupinan An apparatus for studying wear damage in UHMWPE: description and initial wear results A. Yoganathan Advances in bioengineering vol 39 1998 ASME New York 347
20. J.A. Estupinan, T.M. Wright, and D.L. Bartel Simulation predicts location and orientation of initial cracks in UHMWPE in low conformity sliding contact Proceedings of the Forty-seventh Annual Meeting of the Orthopaedic Research Society vol 26 2001 220
21. C.F. Scifert, T.D. Brown, and D.R. Pedersen Development and physical validation of a finite element model of total hip dislocation Comput Methods Biomech Biomed Engin 2 1999 2
22. R.L. Bartz, P.C. Nobel, and N.R. Kadakia The effect of femoral component head size on posterior dislocation of the artificial hip joint J Bone Joint Surg Am 82 2000 9
23. P.E. Beaule, T.P. Schmalzried, and P. Udomkiat Jumbo femoral head for the treatment of recurrent dislocation following total hip replacement J Bone Joint Surg Am 84-A 2002 2
24. D. Halley, A. Glassman, and R.D. Crowninshield Recurrent dislocation after revision total hip replacement with a large prosthetic femoral head. A case report J Bone Joint Surg Am 86-A 2004 4
25. J. Fisher, J. Bell, and P.S. Barbour A novel method for the prediction of functional biological activity of polyethylene wear debris Proc Inst Mech Eng [H] 215 2001 2
26. J.B. Matthews, A.A. Besong, and T.R. Green Evaluation of the response of primary human peripheral blood mononuclear phagocytes to challenge with in vitro generated clinically relevant UHMWPE particles of known size and dose J Biomed Mater Res 52 2000 2
27. T.R. Green, J. Fisher, and J.B. Matthews Effect of size and dose on bone resorption activity of macrophages by in vitro clinically relevant ultra high molecular weight polyethylene particles J Biomed Mater Res 53 2000 5
28. M.M. Endo, P.S. Barbour, and D.C. Barton Comparative wear and wear debris under three different counterface conditions of crosslinked and non-crosslinked ultra high molecular weight polyethylene Biomed Mater Eng 11 2001 1
29. M.D. Ries, M.L. Scott, and S. Jani Relationship between gravimetric wear and particle generation in hip simulators: conventional compared with cross-linked polyethylene J Bone Joint Surg Am 83-A Suppl 2, Pt 2 2001 116
30. O.K. Muratoglu, E.S. Greenbaum, and C.R. Bragdon Surface analysis of early retrieved acetabular polyethylene liners: a comparison of conventional and highly crosslinked polyethylenes J Arthroplasty 19 2004 1