Stabilization and solidification of waste phosphate sludge using Portland cement and fly ash as cement substitute

Journal of Environmental Science and Health - Part A Toxic/Hazardous Substances and Environmental Engineering

Volumn 40, Issue 9, 2005, Pages 1763-1774

  Pinarli, Vedat ^a   Karaca, Gizem ^a   Salihoglu, Guray ^a   Salihoglu, Nezih Kamil ^a  

^a ULUDAG UNIVERSITY   (Turkey)

Author keywords

Compressive strength; Fly ash; Leaching; Phosphate sludge; Portland cement

Indexed keywords

CONCENTRATION (PROCESS); ENVIRONMENTAL PROTECTION; FLY ASH; LAND FILL; LEACHING; MORTAR; NICKEL; PHOSPHATES; PORTLAND CEMENT; SOLIDIFICATION; STABILIZATION;

COMPRESSIVE STRENGTHS; LANDFILLING; PHOSPHATE SLUDGE; SOLIDIFIED WASTES;

SEWAGE SLUDGE;

CEMENT; NICKEL; PHOSPHATE; WATER; ZINC;

ARTICLE; COMPRESSIVE STRENGTH; CONCENTRATION (PARAMETERS); ENVIRONMENTAL PROTECTION; FLY ASH; LANDFILL; LEACHING; SLUDGE; SOLID WASTE; WASTE WATER MANAGEMENT;

CARBON; CONSTRUCTION MATERIALS; PARTICULATE MATTER; PHOSPHATES; REFUSE DISPOSAL; SEWAGE;

EID: 23844452319     PISSN: 10934529     EISSN: 15324117     Source Type: Journal    
DOI: 10.1081/ESE-200068051     Document Type: Article

References (52)

1. Conner, J.R. Chemical fixation and solidification of hazardous wastes. Van Nostrand Reinhold, New York, 1990, 417-426.
2. U.S. Environmental Protection Agency. Innovative site remediation technology design & application: Stabilization/solidification, EPA/542-B-97-007, 1997, Washington, Vol. 4, 1.1-2.22.
3. Glasser, F.P. Fundamental aspects of cement solidification and stabilization. J. Hazard. Mater. 1997, 52, 151-170.
4. Hamilton, I.W.; Sammes, N.M. Encapsulation of steel foundry bag house dusts in cement mortar. Cement Concrete Res. 1999, 29, 55-61.
5. Skvara, F.; Kastanek, F.; Pavelkova, I.; Solcova, O.; Maleterova, Y.; Schneider, P. Solidification of waste steel foundry dust with portland cement. J. Hazard. Mater. 2002, B89, 67-81.
6. Stegemann, J.; Caldwell, R.J.; Shi, C. Variability of field solidified waste. J. Hazard. Mater. 1997, 52, 335-348.
7. Andres, A.; Ortiz, I.; Viguri, J.R.; Irabien, A. Long-term behaviour of toxic metals in stabilized steel foundry dusts. J. Hazard. Mater. 1995, 40, 31-42.
8. Jang, A.; Kim, I.S. Solidification and stabilization of Pb, Zn, Cd and Cu in tailing wastes using cement and fly ash. Miner. Eng. 2000, 13, 14-15.
9. Chan, Y.M.; Agamuthu, P.; Mahalingam, R. Solidification and stabilization of asbestos waste from an automobile brake manufacturing facility using cement. J. Hazard. Mater. 2000, B77, 209-226.
10. Spence, R.D.; Mattus, A.J. Laboratory stabilization/ssolidification of tank sludges: MVST/BVEST. J. Environ. Manage. 2004, 70, 189-202.
11. Valls, S.; Vazquez, E. Stabilisation and solidification of sewage sludges with portland cement. Cement Concrete Res. 2000, 30, 1671-1678.
12. Pinarli, V.; Emre, N.K. Constructive sludge management-reutilization of municipal sewage sludge in portland cement mortars. Environ. Technol. 1994, 15, 833-841.
13. Pinarli, V.; Kaymal, G. An innovative sludge disposal option-reuse of sludge ash by incorporation in construction materials. Environ. Technol. 1994, 15, 843-852.
14. Cioffi, R.; Lavorgna, M.; Santoro, L. Environmental and technological effectiveness of a process for the stabilization of a galvanic sludge. J. Hazard. Mater. 2002, B89, 165-175.
15. Sawides, C.; Papadopoulos, A.; Haralambous, K.J.; Loizidou, M. Cement based stabilization/solidification of heavy metal plating sludge. J. Environ. Sci. Health A 2001, A36, 1129-1134.
16. Balkan, M.; Kocasoy, G. Solidification of industrial sludge and its beneficial usages, Proceedings Sardinia 99, Seventh International Waste Management and Landfill Symposium, Italy, Oct. 4-8, 1999; Environmental Sanitary Engineering Center: Cagliari, 1999.
17. Fitch, J.R.; Cheeseman, C.R. Characterization of environmentally exposed cement-based stabilized/solidified industrial waste. J. Hazard. Mater. 2003, 101, 239-255.
18. Li, X.D.; Zhang, Y.M.; Poon, C.S.; Lo, I.M.C. Study of zinc in cementitious material stabilized/solidified wastes by sequential chemical extraction and microstructural analysis. Chem. Spec. Bioavailab. 2001, 13, 1-7.
19. Asavapisit, S.; Naksrichum, S.; Harnwajanawong, N. Strength, leachability and characteristics of cement-based solidified plating sludge. Cement Concrete Res. 2005, 35, 1042-1049.
20. Ruiz, M.C.; Irabien, A. Environmental behaviour of cement-based stabilized foundry sludge products incorporating additives. J. Hazard. Mater. 2004, B109, 45-52.
21. Coz, A.; Andres, A.; Soriano, S.; Irabien, A. Environmental behaviour of stabilized foundry sludge. J. Hazard. Mater. 2004, B109, 95-104.
22. Andres, A.; Ibanez, R.; Ortiz, I.; Irabien, J.A. Experimental study of the waste binder anhydrite in the solidification/stabilization process of heavy metal sludges. J. Hazard. Mater. 1998, 57, 155-168.
23. Cheeseman, C.R.; Asavapisit, S.; Knight, J. Effect of uniaxially pressing ordinary Portland cement pastes containing metal hydroxides on porosity, density, and leaching. Cement Concrete Res. 1998, 28, 1639-1653.
24. Olmo, I.F.; Chacon, E.; Irabien, A. Influence of lead, zinc, iron (III) and chromium (III) oxides on the setting time and strength development of portland cement. Cement Concrete Res. 2001, 31, 1213-1219.
25. Park, C.K. Hydration and solidification of hazardous wastes containing heavy metals using modified cementitious materials. Cement Concrete Res. 2000, 30, 429-435.
26. Asavapisit, S.; Fowler, G.; Cheeseman, C.R. Solution chemistry during cement hydration in the presence of metal hydroxide wastes. Cement Concrete Res. 1997, 27, 1249-1260.
27. Earth, E.F.; Percin, P. Stabilization and solidification of hazardous wastes. Noyes Data Corporation, Park Ridge, NJ, 1990, 3-67.
28. Lagrega, M.D.; Buckingham, P.L.; Evans J.C. Hazardous waste management. McGraw-Hill, New York, 1994, 641-643.
29. ASTM C 150-86. Standard specification for portland cement. Annual Book of ASTM Standards Section 4. Construction: Philadelphia, 1989, Vol. 04.01, 115-119.
30. ASTM C 618-89. Standard specification for fly ash and raw or calcined natural Pozzolan for use As a mineral admixture in portland cement concrete. Annual Book of ASTM Standards Section 4. Construction: Philadelphia, 1989, Vol. 04.02, 296-298.
31. ASTM 204-84. Standard test method for fineness of portland cement by air permeability apparatus. Annual Book of ASTM Standards Section 4. Construction: Philadelphia, 1989, Vol. 04.01, 156-162.
32. ASTM C 778-87. Standard specification for standard sand. Annual Book of ASTM Standards Section 4. Construction: Philadelphia, 1989; Vol. 04.01, 333-334.
33. ASTM C 807-89. Standard test method for time of setting of hydraulic cement mortars using portions of prisms broken in flexure. Annual Book of ASTM Standards Section 4. Construction: Philadelphia, 1989, Vol. 04.01, 358-361.
34. Federal Register, Vol. 55, No. 61, 29 March 1990.
35. U.S. Environmental Protection Agency. Land disposal restrictions phase II-Universal treatment standards, and treatment standards for organic toxicity characteristics wastes and newly listed wastes, Final Rule, Title 40 Federal Regulations (CFR), 7-1-99 Edition, Part 268, 1999.
36. DOCE. European waste catalogue, L226/3-24. 2000/532/EC, Commission Decisions 2001/118/EC, 2001/119/EC and Council Decision 2001/573/EC, 2001.
37. Jolicoeur, C.; Simard, M.A.C. Chemical admixture-cement interactions: phenomenology and physico-chemical concepts. Cement Concrete Comp. 1998, 20, 87-101.
38. Gervais, C.; Ouki, S.K. Performance study of cementitious systems containing zeolite and silica fume: Effects of four metal nitrates on the setting time, strength and leaching characteristics. J. Hazard. Mater. 2002, B93, 187-200.
39. Rosetti, V.A.; Medici, F. Inertization of toxic metals in cement matrices; Effects on hydration, setting and hardening. Cement Concrete Res. 1995, 25, 1147-1152.
40. Hills, C.D.; Sollars, C.J.; Perry, R. Ordinary portland cement based solidification: The role of OPC reviewed. Cement Concrete Res. 1993, 23, 196-212.
41. Çolak, A. Characteristics of pastes from a portland cement containing different amounts of natural pozzolan. Cement Concrete Res. 2003, 33, 585-593.
42. Yijin, L.; Shiqiong, Z.; Jian, Y.; Yingli, G. The effect of fly ash on the fluidity of cement paste, mortar, and concrete. International Workshop on Sustainable Development and Concrete Technology, Beijing, May 20-21, 2004, 339-345.
43. Cheerarot, R.; Jaturapitakkul, C. A study of disposed fly ash from landfill to replace portland cement. Waste Manage. 2004, 24, 701-709.
44. Maltais, Y.; Marchand J. Influence of curing temperature on cement hydration and mechanical strength development of fly ash mortars. Cement Concrete Res. 1997, 27, 1009-1020.
45. Arliguie, G.; Grandet, J. Influence de la composition d'un ciments portland sur son hydration en presence de zinc. Cement Concrete Res. 1990, 20, 517-524.
46. Minocha, A.K.; Neeraj, J. and Verma, C.L.; Effect of inorganic materials on the solidification of heavy metal sludge. Cement Concrete Res. 2003, 33, 1695-1701.
47. Langan, B.W.; Weng, K.; Ward, M.A. Effect of silica fume and fly ash on heat of hydration of portland cement. Cement Concrete Res. 2002, 32, 1045-1051.
48. Poon, C.S.; Qiao X.C.; Lin Z.S. Pozzolanic properties of reject fly ash in blended cement pastes. Cement Concrete Res. 2003, 33, 1857-1865.
49. Kula, I.; Erdogan, Y.; Sevinc, V. Effects of colemanite waste, cool bottom ash, and fly ash on the properties of cement. Cempent Concrete Res. 2001, 31, 491-494.
50. Li, X.D.; Poon, C.S.; Sun, H.; Lo, I.M.C.; Kirk, D.W. Heavy metal speciation and leaching behaviours in cement based solidified/stabilized waste materials. J. Hazard. Mater. 2001, A82, 215-230.
51. Pereira, F.C.; Pinero, M.R.; Vale, J. Solidification/stabilization of electric arc furnace dust using coal ash analysis of the stabilization process. J. Hazard. Mater. 2001, B82, 183-195.
52. Antiohos, S.; Tsimas, S. Investigating the role of reactive silica in the hydration mechanisms of high-calcium fly ash/cement systems. Cement Concrete Comp. 2004,27, 171-181.