Design and implementation of the CMAC-based controller for permanent magnet synchronous motor

Electric Power Components and Systems

Volumn 33, Issue 9, 2005, Pages 1015-1037

  Lu, Hung Ching ^a   Tseng, Tzu Yu ^a  

^a TATUNG UNIVERSITY   (Taiwan)

Author keywords

CMAC; Permanent magnet synchronous motor

Indexed keywords

ACCELERATION; ERROR ANALYSIS; MATHEMATICAL MODELS; MATRIX ALGEBRA; PERMANENT MAGNETS; SIGNAL INTERFERENCE; SYNCHRONOUS MOTORS; TORQUE; VELOCITY;

AUXILIARY CONTROLLERS; CEREBELLAR-MODEL-ARTICULATION-CONTROLLERS (CMAC); ELECTROMOTIVE FORCE (EMF); PROPORTIONAL-INTEGRAL (PI);

CONTROL EQUIPMENT;

EID: 23144441557     PISSN: 15325008     EISSN: None     Source Type: Journal    
DOI: 10.1080/15325000590921035     Document Type: Article

References (30)

1. A. Rubaai and R. Yalamanchili, "Dynamic study of an electronically brushless DC machine via computer simulation," IEEE Transactions on Energy Conversion, vol. 7, pp. 132-138, March 1992.
2. M. E. Elbuluk and M. D. Kankam, "Motor drive technologies for the power-by-wire (PBW) program: Options, trends and tradeoffs - Part I: Motors and controllers," IEEE AES System Magazine, vol. 10, no. 10, pp. 37-41, November 1995.
3. H. C. Chen and C. M. Liaw, "Sensorless control via intelligent commutation tuning for brushless DC motor," IEE Proceeding Electric Power Applications, vol. 146, no. 6, November 1999.
4. K. S. Low, K. Y. Chiun, and K. V. Ling, "Evaluating generalized predictive control for a brushless DC drive," IEEE Transactions on Power Electronics, vol. 13, no. 6, November 1998.
5. P. C. Sen, "Electric motor drives and control-Past, present, and future," IEEE Transactions on Industrial Electronics, vol. 37, no. 6, pp. 562-567, December 1990.
6. A. Rubaai and R. Kotaru, "Neural net-based robust controller design for brushless DC motor drives," IEEE Transactions on Systems, Man and Cybernetics, Part C, vol. 29, no. 3, August 1999.
7. K. Y. Cheng and Y. Y. Tzou, "Design of a sensorless commutation IC for BLDC motors," IEEE Transactions on Power Electronics, vol. 18, no. 6, pp. 1365-1375, November 2003.
8. D. H. Jung and I. J. Ha, "Low-cost sensorless control of brushless DC motors using a frequency-independent phase shifter," IEEE Transactions on Power Electronics, vol. 15, no. 4, pp. 744-752, July 2000.
9. J. Hur, D. S. Hyun, and J. P. Hong, "A method for reduction of cogging torque in brushless DC motor considering the distribution of magnetization by 3DEMCN," IEEE Transactions on Magnetics, vol. 34, no. 5, pp. 3523-3535, September 1998.
10. X. Wang, Q. Li, S. Wang, and Q. Li, "Analytical calculation of air-gap magnetic field distribution and instantaneous characteristics of brushless DC motors," IEEE Transactions on Energy Conversion, vol. 18, no. 3, pp. 424-432, September 2003.
11. F. J. Lin and C. H. Lin, "A permanent-magnet synchronous motor servo drive using self-constructing fuzzy neural network controller," IEEE Transactions on Energy Conversion, vol. 19, no. 1, pp. 66-72, March 2004.
12. P. Pillay and R. Krishnan, "Modeling, simulation, and analysis of permanent-magnet motor drives, Part I: The permanent-magnet synchronous motor drive," IEEE Transactions on Industry Applications, vol. 25, no. 2, pp. 265-273, March/April 1989.
13. P. Pilly and R. Krishnan, "Application characteristics of permanent magnet synchronous and brushless DC motors for servo drives," IEEE Transactions on Industry Applications, vol. 27, no. 5, pp. 986-996, September/October 1991.
14. Y. Li, J. Zou, and Y. Lu, "Optimum design of magnet shape in permanent magnet synchronous motors," IEEE Transactions on Magnetics, vol. 39, no. 6, pp. 3523-3526, November 2003.
15. D. G. Taylor, "Nonlinear control of electric machines: An overview," IEEE Control System, vol. 14, pp. 41-51, December 1994.
16. Z. Chen, M. Tomita, S. Doki, and S. Okuma, "New adaptive sliding observers for position and velocity sensorless controls of brushless DC motors," IEEE Transactions on Industrial Electronics, vol. 47, no. 3, pp. 582-591, June 2000.
17. M. Tursini, R. Petrella, and F. Parasiliti, "Initial rotor position estimation method for PM motors," IEEE Transactions on Industry Applications, vol. 39, no. 6, pp. 1630-1640, November/December 2003.
18. W. T. Miller, F. H. Glanz, and L. G. Kraft, "Application of a general learning algorithm of the control of robotics manipulator," International Journal of Robot Res., vol. 6, no. 2, pp. 84-98, 1987.
19. W. T. Miller, R. P. Hewes, F. H. Glanz, and L. G. Kraft, "Real-time dynamic control of an industrial manipulator using a neural-network based learning controller," IEEE Transactions on Robotics Automat., vol. 6, no. 1, pp. 1-9, February 1990.
20. C. M. Lin and Y. F. Peng, "Adaptive CMAC-based supervisory control for uncertain nonlinear systems," IEEE Transactions on Systems, Man and Cybernetics, Part B, vol. 34, no. 2, pp. 1248-1260, April 2004.
21. F. J. G. Alez-Serrano, A. R. Figueiras-Vidal, and A. A. Es-Rodríguez, "Generalizing CMAC architecture and training," IEEE Transactions on Neural Networks, vol. 9, no. 6, pp. 1509-1514, November 1998.
22. M. A. EI-Sharkawi and S. Weerasooriya, "Development and implementation of self-tuning tracking controller for DC motors," IEEE Transactions on Energy Conversion, vol. 5, no. 1, pp. 122-128, March 1990.
23. D. Q. Zhang and S. K. Panda, "Chatting-free and fast-response sliding mode controller," IEE Proceedings Control Theory Applications, vol. 146, no. 2, pp. 412-419, March 1999.
24. J. N. Lin and S. M. Song, "Modeling gait transitions of quadrupeds and their generalization with CMAC neural networks," IEEE Transactions on Systems, Man and Cybernetics, Part C, vol. 32, no. 3, pp. 177-189, August 2002.
25. S. F. Su, T. Tao, and T. H. Hung, "Credit assigned CMAC and it's application to online learning robust controllers," IEEE Transactions on Systems, Man and Cybernetics, Part B, vol. 33, no. 2, pp. 202-213, April 2003.
26. J. S. Ker, Y. H. Kuo, R. C. Wen, and B. D. Liu, "Hardware implementation of CMAC neural network with reduced storage requirement," IEEE Transactions on Neural Networks, vol. 8, no. 6, pp. 1545-1556, November 1997.
27. C. P. Hung, "Integral variable structure control of nonlinear system using a CMAC neural network learning approach," IEEE Transactions on Systems, Man and Cybernetics, Part B, vol. 34, no. 1, pp. 702-709, February 2004.
28. T. Tao, H. C. Lu, and S. F. Su, "Robust CMAC control schemes for dynamic trajectory following," Journal of the Chinese Institute of Engineers, vol. 25, no. 3, pp. 253-263, 2002.
29. S. P. Wu, "Design and implementation of a DSP controller for a brushless DC motor, Master thesis, Department of Mechanical Engineering, National Chung-Hsing University, June 1998.
30. K. H. Kim and M. J. Youn, "A nonlinear speed control for a PM synchronous motor using a simple disturbance estimation technique," IEEE Transactions on Industrial Electronics, vol. 49, pp. 524-535, June 2002.