Engineering properties and performance of dental crowns

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine

Volumn 219, Issue 4, 2005, Pages 245-255

  Mitchell, C A ^a   Orr, J F ^a  

^a QUEEN'S UNIVERSITY BELFAST   (United Kingdom)

Author keywords

Dental cements; Dental crowns; Failure; Fracture; Glass ionomer luting cements

Indexed keywords

ADHESIVES; BONDING; DENTAL CEMENT; FAILURE (MECHANICAL); FATIGUE TESTING; FRACTURE; IONOMERS; MATHEMATICAL MODELS; MECHANICAL TESTING; PROBABILITY; REGRESSION ANALYSIS; RELIABILITY THEORY; CEMENTS; COMPUTER SYSTEM RECOVERY; DENTAL PROSTHESES; FRACTURE TOUGHNESS; GLASS; INTERFACES (MATERIALS); LOAD TESTING; PROBABILITY DISTRIBUTIONS; SILANES; SUBSTRATES; WEIBULL DISTRIBUTION;

DENTAL CROWNS; ENGINEERING PROPERTIES; GLASS IONOMER LUTING CEMENTS; MICROLEAKAGE; RELIABLE RETENTION; TOOTH STRUCTURE;

DENTAL PROSTHESES; FRACTURE;

ADHESION TO SUBSTRATE; DENTAL CROWNS; ENGINEERING PROPERTIES; GLASS IONOMER LUTING CEMENTS; LONG TERM PERFORMANCE; MIXED-MODE CONDITIONS; RELAXATION OF STRESS; RESIN-MODIFIED GLASS-IONOMER CEMENT;

BIOMEDICAL AND DENTAL MATERIALS; TOOTH CEMENT;

BIOMEDICAL ENGINEERING; CEMENTATION; CERAMICS; CHEMISTRY; COMPUTER AIDED DESIGN; DENTAL BONDING; DENTAL SURGERY; EQUIPMENT; HUMAN; MATERIALS; MATERIALS TESTING; MECHANICAL STRESS; METHODOLOGY; PROSTHESIS; REVIEW; SURFACE PROPERTY; TOOTH CROWN; TOOTH PROSTHESIS;

BIOMEDICAL ENGINEERING; CEMENTATION; CERAMICS; COMPUTER-AIDED DESIGN; CROWNS; DENTAL BONDING; DENTAL CEMENTS; DENTAL MATERIALS; DENTAL PROSTHESIS DESIGN; DENTAL RESTORATION FAILURE; EQUIPMENT FAILURE ANALYSIS; HUMANS; MANUFACTURED MATERIALS; MATERIALS TESTING; PROSTHESIS FITTING; STRESS, MECHANICAL; SURFACE PROPERTIES;

EID: 23044480459     PISSN: 09544119     EISSN: None     Source Type: Journal    
DOI: 10.1243/095441105X34248     Document Type: Article

References (52)

1. Mitchell, C. A. Selection of materials for post cementation, Dental Update, 2000, 27(7), 350-353.
2. Schwartz, N. L., Whitsett, L. D., and Stewart, J. L. Unserviceable crowns and fixed partial dentures: life-span and causes for loss of serviceability, J. Am. Dent. Ass., 1970, 81, 1395-1401.
3. Walton, J. N., Gardner, F. M., and Agar, J. R. A survey of crown and fixed partial denture failures: length of service and reasons for replacement, J. Prosthet. Dentistry, 1986, 56, 416-421.
4. Goodacre, C. J., Bernal, G., Rungeharassaeng, K., and Kan, J. Y. K. Clinical complications in fixed prosthodontics, J. Prosthet. Dentistry, 2003, 90, 31-41.
5. Nakamichi, I., Iwaku, M., and Fusayama, T. Bovine teeth as possible substitutes in the adhesion test, J. Dent. Res., 1983, 62, 1076-1081.
6. Schmalz, G., Hiler, K. A., Nunez, L. J., Stoll, J., and Weis, K. Permeability characteristics of bovine and human dentin under different pre-treatment conditions, J. Endodont., 2001, 27 (1), 23-30.
7. Schilke, R., Bauss, O., Lisson, J. A., Schuckar, M., and Geursten, W. Bovine dentin as a substitute for human dentin in shear bond strength measurements, Am. J. Dentistry, 1999, 12(2), 92-96.
8. Mitchell, C. A., Orr, J. F., and Kennedy, J. G. A semi-empirical model for the prediction of how post-retained crowns will fail under compressive loading, J. Dent. Res., 1992, 71(9), 1613-1618.
9. Ashby, M. F. and Jones, D. R. H. The statistics of brittle fracture and case study. In Engineering Materials, 1988, pp. 169-173 (Pergamon Press, Oxford).
10. McCabe, J. F. and Carrick, T. E. A statistical approach to the mechanical testing of dental materials and the statistical treatment of results, Dent. Mater., 1986, 2, 139-142.
11. Mitchell, C. A., Abbariki, M., and Orr, J. F. The influence of luting cement on the probabilities of survival and modes of failure of cast full-coverage crowns, Dent. Mater., 2000, 16, 198-206.
12. Creyke, W. E. C., Sainsbury, I. E. J., and Morrell, R. (Eds) Design with non-ductile materials, 1st Edition, 1982, pp. 83-87 (Applied Science Publishers, London).
13. Mitchell, C. A., Orr, J. F., Connor, K. N., Magill, J. P. G., and Maguire, G. R. Comparative study of four glass-ionomer luting cements during post pullout tests, Dent. Mater., 1994, 10, 88-91.
14. McCabe, J. F., Carrick, T. E., Chadwick, R. G., and Walls, A. W. G. Alternative approaches to evaluating the fatigue characteristics of materials, Dent. Mater., 1990, 6, 24.
15. Huysmans, M. C. D. N. J. M., Van Der Varst, P/G. T., Shafer, R., Peters, M. C. R. B., Plasschaert, A. J. M., and Soltesz, U. Fatigue behaviour of direct post-and-core-restored premolars, J. Dent. Res., 71, 1145.
16. Orr, J. F. and Mitchell, C. A. The evaluation of post-retained crowns using a custom-designed fatigue machine, J. Oral Rehabil., 1996, 23, 179-185.
17. Drummond, J. L. Cyclic fatigue of composite restorative materials, J. Oral Rehab., 1989, 16, 509.
18. Wiskott, H. W. A., Nicholls, J. I., and Taggert, R. Fatigue strength of a Au-Pd alloy/585 solder combination, J. Dent. Res., 1991, 70, 140.
19. Drummond, J. L. and Miescke, K. J. Weibull models for the statistical analysis of dental composite data: aged in physiologic media and cyclic-fatigued, Dent. Mater., 1991, 7, 25.
20. Hargreaves, A. S. The effects of cyclic stress on dental polymethylmethacrylate. II. Flexural fatigue, J. Oral Rehabil., 10, 137.
21. Mitchell, C. A. and Orr, J. F. Comparison of conventional and resin-modified glass-ionomer luting cements in the retention of post-crowns by fatigue loading, J. Oral Rehabil., 1998, 25, 472-478.
22. Mitchell, C. A., Orr, J. F., and Kennedy, J. G. Factors influencing the failure of dental glass ionomer luting cement due to contraction, Biomaterials, 1995, 16, 11-16.
23. Mitchell, G. A., Orr, J. F., and Russell, M. D. Capsulated versus hand-mixed glass-ionomer luting cements for post retention, J. Dentistry, 1998, 26(1), 47-51.
24. Davidson, C. L., Van Zeghbroeck, L., and Feilzer, A. J. Destructive stresses in adhesive luting cements, J. Dent. Res., 1991, 70, 880-882.
25. Watts, D. C., Kisumbi, B. K., and Toworfe, G. K. Dimensional changes of resin/ionomer restoratives in aqueous and neutral media. Dent. Mater., 2000, 16(2), 89-96.
26. Attin, T., Buchall, A. M., Kiebassa, A. M., and Hellwig, E. Curing shrinkage and volumetric changes of resin-modified glass ionomer restorative materials, Dent. Mater., 1995, 11, 359-362.
27. Kanchanavasita, W., Pearson, G. J., and Anstice, H. M. Influence of humidity on dimensional stability of a range of ion-leachable cements, Biomaterials, 1995, 16(12), 921-929.
28. Van Zeghbroeck, L. M., Davidson, C. L., and De Clercq, M. Cohesive failure due to contraction stresses in glass ionomer luting cements, J. Dent. Res., 1989, 68, 1014, abstract number 1180.
29. Hornsby, P. R. Dimensional stability of glass-ionomer cements, J. Chem. Technol. Biology, 1980, 30, 595-601.
30. Van Zeghbroeck, L. M., Davidson, C. L., and De Clerq, M. Cohesive failure due to contraction stresses in glass ionomer luting cements, J. Dent. Res., 1989, 68, 1014.
31. Feilzer, A. J., De Gee, A. J., and Davidson, C. L. Increased wall-to-wall curing contraction in thin bonded resin layers, J. Dent. Res., 1989, 68, 48-50.
32. De Jager, N., Pallav, P., and Feilzer, A. J. The apparent increase of the Young's modulus in thin cement layers, Dent. Mater., 2004, 20, 457-462.
33. Mitchell, C. A. and Douglas, W. H. Comparison of the porosity of hand-mixed and capsulated glass-ionomer luting cements, Biomaterials, 1997, 18(16), 1127-1131.
34. Covey, D. A. and Ewoldsen, N. O. Porosity in manually and machine mixed resin-modified glass-ionomer cements, Oper. Dentistry, 2001, 26(6), 617-623.
35. Fleming, G. J., Landini, G., and Marquis, P. M. Properties of encapsulated and hand-mixed zinc phosphate dental cement, Am. J. Dentistry, 2002, 15(2), 91-96.
36. Fleming, G. J. P. and Zala, D. M. An assessment of encapsulated versus hand-mixed glass-ionomer restoratives, Oper. Dentistry, 2003, 28(2), 168-177.
37. Sennou, H. E., Lebugle, A. A., and Gregoire, G. L. X-ray photoelectron spectroscopy study of the dentin-glass ionomer cement interface, Dent. Mater., 1999, 15, 229-237.
38. Yoshida, Y., Van Meerbeek, B., Nakayama, Y., Snauwaert, J., Hellemans, L., Lambrechts, P., Vanherle, G., and Wakasa, K. Evidence of chemical bonding at biomaterial-hard tissue interfaces, J. Dent. Res., 2000, 79(2), 709-714.
39. Ngo, H., Mount, G. J., and Peters, M. C. R. B. A study of glass-ionomer cement and its interface with enamel and dentin using a low-temperature, high-resolution scanning electron microscopic technique, Quintessence Int., 1997, 28, 63-69.
40. Sidhu, S. K. and Watson, T. F. Interfacial characteristics of resin modified glass-ionomer materials: a study on fluid permeability using confocal fluorescence microscopy. J. Dent. Res., 1998, 77 (9), 1749-1759.
41. Sidhu, S. K., Sherriff, M., and Watson, T. F. Failure of resin-modified glass-ionomers subjected to shear loading. J. Dent. 1999, 27(5), 373-381.
42. Tay, F. R., Sidhu, S. K., Watson, T. F., and Pashley, D. H. Water dependent interfacial transition zone in resin-modified glass-ionomer cement/dentin interfaces, J. Dent. Res., 2004, 83 (8), 644-649.
43. Mitchell, C. A., Douglas, W. H., and Cheng, Y.-S. Fracture toughness of conventional, resin-modified glass-ionomer and composite luting cements, Dent. Mater., 1999, 15, 7-13.
44. IC from small, non-LEFM specimens, supported by experiments on aluminium, Int. J. Fract. Mechanics, 1979, 5, 515-536.
45. Knobloch, L. A., Kerby, R. E., Seghi, R., Berlin, J. S., and Lee, J. S. Fracture toughness of resin-based luting cements, J. Prosthet. Dentistry, 2000, 83, 204-209.
46. Beatty, M. W. and Pidaparti, R. M. V. Elastic and fracture properties of direct filling materials, Biomaterials, 1993, 14, 999-1002.
47. Ryan, A. K., Orr, J. F., and Mitchell, C. A. A comparative evaluation of dental luting cements by fracture toughness tests and fractography, Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2001, 215(H1), 65-73.
48. Lin, C. P. Structure-property-function relationships in the dentine enamel complex and tooth restoration interface, PhD Thesis, Department of Oral Science, University of Minnesota, 1993.
49. Kovarik, R. E., Ergle, J. W., and Fairhurst, C. W. Effects of specimen geometry on the measurement of fracture toughness, Dent. Mater., 1991, 7, 166-169.
50. Ryan, A. K., Mitchell, C. A., and Orr, J. F. Fracture mechanics analysis of the dentine-luting cement interface, Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2002, 216 (H4), 271-276.
51. Fujishima, A. and Ferracane, J. L. Comparison of four modes of fracture toughness testing for dental composites, Dent. Mater., 1996, 12, 38-43.
52. Wang, X. and Agrawal, C. M. A mixed mode fracture toughness test of bone-biomaterial interfaces, J. Biomed. Mater. Res., 2000, 53, 664-672.