-
1
-
-
0037946819
-
Effect of the silicone disclosing procedure on the shear bond strength of composite cements to ceramic restorations
-
S. Szep, C. Schmid, P. Weigl, L. Hahn, and D. Heidemann Effect of the silicone disclosing procedure on the shear bond strength of composite cements to ceramic restorations J Prosthet Dent 89 2003 60 65
-
(2003)
J Prosthet Dent
, vol.89
, pp. 60-65
-
-
Szep, S.1
Schmid, C.2
Weigl, P.3
Hahn, L.4
Heidemann, D.5
-
2
-
-
0029311624
-
Chemical versus dual curing of resin inlay cements
-
W.A. el-Badrawy, and O.M. el-Mowafy Chemical versus dual curing of resin inlay cements J Prosthet Dent 73 1995 515 524
-
(1995)
J Prosthet Dent
, vol.73
, pp. 515-524
-
-
El-Badrawy, W.A.1
El-Mowafy, O.M.2
-
3
-
-
0025393398
-
Influence of ceramic thickness on the polymerization of light-cured resin cement
-
R. Blackman, N. Barghi, and E. Duke Influence of ceramic thickness on the polymerization of light-cured resin cement J Prosthet Dent 63 1990 295 300
-
(1990)
J Prosthet Dent
, vol.63
, pp. 295-300
-
-
Blackman, R.1
Barghi, N.2
Duke, E.3
-
4
-
-
0032608715
-
Hardening of new resin cements cured through a ceramic inlay
-
O.M. el-Mowafy, M.H. Rubo, and W.A. el-Badraway Hardening of new resin cements cured through a ceramic inlay Oper Dent 24 1999 38 44
-
(1999)
Oper Dent
, vol.24
, pp. 38-44
-
-
El-Mowafy, O.M.1
Rubo, M.H.2
El-Badraway, W.A.3
-
5
-
-
2442423177
-
Light transmission through all-ceramic dental materials: A pilot study
-
F.H. Rasetto, C.F. Driscoll, V. Prestipino, R. Masri, and J.A. von Fraunhofer Light transmission through all-ceramic dental materials: a pilot study J Prosthet Dent 91 2004 441 446
-
(2004)
J Prosthet Dent
, vol.91
, pp. 441-446
-
-
Rasetto, F.H.1
Driscoll, C.F.2
Prestipino, V.3
Masri, R.4
Von Fraunhofer, J.A.5
-
6
-
-
0032160199
-
Dental luting agents: A review of the current literature
-
S.F. Rosenstiel, M.F. Land, and B.J. Crispin Dental luting agents: a review of the current literature J Prosthet Dent 80 1998 280 301
-
(1998)
J Prosthet Dent
, vol.80
, pp. 280-301
-
-
Rosenstiel, S.F.1
Land, M.F.2
Crispin, B.J.3
-
7
-
-
1242317769
-
The efficiency of different light sources to polymerize composite beneath a simulated ceramic restoration
-
A.G. Ozyesil, A. Usumez, and B. Gunduz The efficiency of different light sources to polymerize composite beneath a simulated ceramic restoration J Prosthet Dent 91 2004 151 157
-
(2004)
J Prosthet Dent
, vol.91
, pp. 151-157
-
-
Ozyesil, A.G.1
Usumez, A.2
Gunduz, B.3
-
8
-
-
1842579077
-
Influence of curing modes on crosslink density in polymer structures
-
M.S. Soh, and A.U.J. Yap Influence of curing modes on crosslink density in polymer structures J Dent 32 2004 321 326
-
(2004)
J Dent
, vol.32
, pp. 321-326
-
-
Soh, M.S.1
Yap, A.U.J.2
-
9
-
-
0027571448
-
The influence of light exposure on polymerization of dual-cure resin cements
-
F.A. Rueggeberg, and W.F. Caughman The influence of light exposure on polymerization of dual-cure resin cements Oper Dent 18 1993 48 55
-
(1993)
Oper Dent
, vol.18
, pp. 48-55
-
-
Rueggeberg, F.A.1
Caughman, W.F.2
-
10
-
-
0032209459
-
Reduced light energy density decreases post-gel contraction while maintaining degree of conversion in composites
-
R.L. Sakaguchi, and H.X. Berge Reduced light energy density decreases post-gel contraction while maintaining degree of conversion in composites J Dent 26 1998 695 700
-
(1998)
J Dent
, vol.26
, pp. 695-700
-
-
Sakaguchi, R.L.1
Berge, H.X.2
-
11
-
-
11144324901
-
Effect of LED curing on the microleakage, shear bond strength and surface hardness of a resin-based composite restoration
-
T.G. Oberholzer, I.C. Du Preez, and M. Kidd Effect of LED curing on the microleakage, shear bond strength and surface hardness of a resin-based composite restoration Biomaterials 26 2005 3981 3986
-
(2005)
Biomaterials
, vol.26
, pp. 3981-3986
-
-
Oberholzer, T.G.1
Du Preez, I.C.2
Kidd, M.3
-
12
-
-
0037607394
-
Light-emitting diode curing: Influence on selected properties of resin composites
-
E. Asmussen, and A. Peutzfeldt Light-emitting diode curing: influence on selected properties of resin composites Quintessence Int 34 2003 71 75
-
(2003)
Quintessence Int
, vol.34
, pp. 71-75
-
-
Asmussen, E.1
Peutzfeldt, A.2
-
13
-
-
1842734535
-
Effects of various light curing methods on the leachability of uncured substances and hardness of a composite resin
-
H.J. Moon, Y.K. Lee, B.S. Lim, and C.W. Kim Effects of various light curing methods on the leachability of uncured substances and hardness of a composite resin J Oral Rehabil 31 2004 258 264
-
(2004)
J Oral Rehabil
, vol.31
, pp. 258-264
-
-
Moon, H.J.1
Lee, Y.K.2
Lim, B.S.3
Kim, C.W.4
-
14
-
-
0036013938
-
High power light emitting diode (LED) arrays versus halogen light polymerization of oral biomaterials: Barcol hardness, compressive strength and radiometric properties
-
R.W. Mills, A. Uhl, G.B. Blackwell, and K.D. Jandt High power light emitting diode (LED) arrays versus halogen light polymerization of oral biomaterials: Barcol hardness, compressive strength and radiometric properties Biomaterials 23 2002 2955 2963
-
(2002)
Biomaterials
, vol.23
, pp. 2955-2963
-
-
Mills, R.W.1
Uhl, A.2
Blackwell, G.B.3
Jandt, K.D.4
-
15
-
-
0347947230
-
Performance of two blue light-emitting-diode dental light curing units with distance and irradiation-time
-
A.W. Bennett, and D.C. Watts Performance of two blue light-emitting-diode dental light curing units with distance and irradiation-time Dent Mater 20 2004 72 79
-
(2004)
Dent Mater
, vol.20
, pp. 72-79
-
-
Bennett, A.W.1
Watts, D.C.2
-
16
-
-
0346686362
-
The influence of storage and indenter load on the Knoop hardness of dental composites polymerized with LED and halogen technologies
-
A. Uhl, C. Michaelis, R.W. Mills, and K.D. Jandt The influence of storage and indenter load on the Knoop hardness of dental composites polymerized with LED and halogen technologies Dent Mater 20 2004 21 28
-
(2004)
Dent Mater
, vol.20
, pp. 21-28
-
-
Uhl, A.1
Michaelis, C.2
Mills, R.W.3
Jandt, K.D.4
-
17
-
-
0346055609
-
Effect of energy density on properties and marginal integrity of posterior resin composite restorations
-
K.S. Vandewalle, J.L. Ferracane, T.J. Hilton, R.L. Erickson, and R.L. Sakaguchi Effect of energy density on properties and marginal integrity of posterior resin composite restorations Dent Mater 20 2004 96 106
-
(2004)
Dent Mater
, vol.20
, pp. 96-106
-
-
Vandewalle, K.S.1
Ferracane, J.L.2
Hilton, T.J.3
Erickson, R.L.4
Sakaguchi, R.L.5
-
18
-
-
0041491462
-
A comparative study of the properties of dental resin composites polymerized with plasma and halogen light
-
S. Deb, and H. Sehmi A comparative study of the properties of dental resin composites polymerized with plasma and halogen light Dent Mater 19 2003 517 522
-
(2003)
Dent Mater
, vol.19
, pp. 517-522
-
-
Deb, S.1
Sehmi, H.2
-
20
-
-
0035405803
-
A light curing method for improving marginal sealing and cavity wall adaptation of resin composite restorations
-
T. Yoshikawa, M.F. Burrow, and J. Tagami A light curing method for improving marginal sealing and cavity wall adaptation of resin composite restorations Dent Mater 17 2001 359 366
-
(2001)
Dent Mater
, vol.17
, pp. 359-366
-
-
Yoshikawa, T.1
Burrow, M.F.2
Tagami, J.3
-
21
-
-
0031136048
-
Physical properties and gap formation of light-cured composites with and without "softstart-polymerization"
-
A. Mehl, R. Hickel, and K.H. Kunzelman Physical properties and gap formation of light-cured composites with and without "softstart- polymerization" J Dent 25 1997 321 330
-
(1997)
J Dent
, vol.25
, pp. 321-330
-
-
Mehl, A.1
Hickel, R.2
Kunzelman, K.H.3
-
22
-
-
0038505306
-
Effect of different bonding agents on shear bond strengths of composite-bonded porcelain to enamel
-
C. Cura, A. Saracoglu, and H.S. Cotert Effect of different bonding agents on shear bond strengths of composite-bonded porcelain to enamel J Prosthet Dent 89 2003 394 399
-
(2003)
J Prosthet Dent
, vol.89
, pp. 394-399
-
-
Cura, C.1
Saracoglu, A.2
Cotert, H.S.3
-
23
-
-
0035501168
-
AFM and SEM study of the effects of etching on IPS Empress 2 dental ceramic
-
X.P. Luo, N. Silikas, M. Allaf, N.H.F. Wilson, and D.C. Watts AFM and SEM study of the effects of etching on IPS Empress 2 dental ceramic Surf Sci 491 2001 388 394
-
(2001)
Surf Sci
, vol.491
, pp. 388-394
-
-
Luo, X.P.1
Silikas, N.2
Allaf, M.3
Wilson, N.H.F.4
Watts, D.C.5
-
24
-
-
0033130006
-
Dentin bond strength and marginal adaptation: Direct composite resins vs ceramic inlays
-
R. Frankenberger, J. Sindel, N. Kramer, and A. Petscelt Dentin bond strength and marginal adaptation: direct composite resins vs ceramic inlays Oper Dent 24 1999 147 155
-
(1999)
Oper Dent
, vol.24
, pp. 147-155
-
-
Frankenberger, R.1
Sindel, J.2
Kramer, N.3
Petscelt, A.4
-
25
-
-
0033629132
-
Effect of different luting procedures on the seating of ceramic inlays
-
P. Hahn, H.G. Schaller, P. Hafner, and E. Hellwig Effect of different luting procedures on the seating of ceramic inlays J Oral Rehabil 27 2000 1 8
-
(2000)
J Oral Rehabil
, vol.27
, pp. 1-8
-
-
Hahn, P.1
Schaller, H.G.2
Hafner, P.3
Hellwig, E.4
-
26
-
-
0026918052
-
Improving bond strength through acid etching of dentin and bonding to wet dentin surfaces
-
J. Kanca Improving bond strength through acid etching of dentin and bonding to wet dentin surfaces J Am Dent Assoc 123 1992 35 43
-
(1992)
J Am Dent Assoc
, vol.123
, pp. 35-43
-
-
Kanca, J.1
-
27
-
-
0141497360
-
Tensile bond strengths of five luting agents to two CAD-CAM restorative materials and enamel
-
J.C. Chang, D.A. Hart, A.W. Estey, and J.T. Chan Tensile bond strengths of five luting agents to two CAD-CAM restorative materials and enamel J Prosthet Dent 90 2003 18 23
-
(2003)
J Prosthet Dent
, vol.90
, pp. 18-23
-
-
Chang, J.C.1
Hart, D.A.2
Estey, A.W.3
Chan, J.T.4
-
28
-
-
0035286330
-
Influence of cross-head speed on resin-dentin shear bond strength
-
A.T. Hara, L.A. Pimenta, and A.L. Rodrigues Jr. Influence of cross-head speed on resin-dentin shear bond strength Dent Mater 17 2001 165 169
-
(2001)
Dent Mater
, vol.17
, pp. 165-169
-
-
Hara, A.T.1
Pimenta, L.A.2
Rodrigues Jr., A.L.3
|