Cephalometric changes following simultaneous first and second maxillary molar distalization using a non-compliance intraoral appliance;Kephalometrische Veränderungen nach simultaner Distalisation erster und zweiter oberer Molaren mittels einer intraoralen Non-Compliance-Apparatur

Journal of Orofacial Orthopedics

Volumn 65, Issue 2, 2004, Pages 123-136

  Papadopoulos, Moschos A ^a   Mavropoulos, Anestis ^b   Karamouzos, Andreas ^a  

^a ARISTOTLE UNIVERSITY OF THESSALONIKI   (Greece)

^b UNIVERSITY OF GENEVA   (Switzerland)

Author keywords

Class II treatment; Intraoral distalization; Jig assembly; Molar distalization; Non compliance treatment

Indexed keywords

ADOLESCENT; ALVEOLAR BONE; ARTICLE; CEPHALOMETRY; CLINICAL ARTICLE; CONTROLLED STUDY; FEMALE; HUMAN; MALE; MALOCCLUSION; MAXILLA; MOLAR TOOTH; ORTHODONTIC DEVICE; ORTHODONTICS; PATIENT COMPLIANCE; PERIODONTAL DISEASE; PREMOLAR TOOTH; PRIORITY JOURNAL; PROSPECTIVE STUDY; RELIABILITY; SCHOOL CHILD; SOFT TISSUE; TOOTH RADIOGRAPHY;

ACTIVATOR APPLIANCES; ADOLESCENT; CEPHALOMETRY; CHILD; DENTAL STRESS ANALYSIS; FEMALE; FOLLOW-UP STUDIES; HUMANS; MALE; MALOCCLUSION, ANGLE CLASS II; MAXILLA; MOLAR; ORTHODONTIC WIRES; TOOTH MOVEMENT;

EID: 1842450887     PISSN: 14345293     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00056-004-0317-z     Document Type: Article

References (43)

1. Baumrind S, Korn EL, Isaacson RJ, et al. Quantitative analysis of the orthodontic and orthopedic effects of maxillary traction. Am J Orthod 1983;84:384-98.
2. Bolla E, Muratore F, Carano A, et al. Evaluation of maxillary molar distalization with the distal jet: A comparison with other contemporary methods. Angle Orthod 2002;72:481-94.
3. Bondemark L, Kurol J, Bernhold M. Repelling magnets versus superelastic nickel-titanium coils in simultaneous distal movement of maxillary first and second molars. Angle Orthod 1994;64:189-98.
4. Bondemark L, Kurol J. Distalization of maxillary first and second molars simultaneously with repelling magnets. Eur J Orthod 1992; 14:264-72.
5. Bourauel C, Drescher D, Ebling J, et al. Superelastic nickel titanium alloy retraction springs - an experimental investigation of force systems. Eur J Orthod 1997;19:491-500.
6. Brickman CD, Sinha PK, Nanda RS. Evaluation of the Jones jig appliance for distal molar movement. Am J Orthod Dentofacial Orthop 2000;118:526-34.
7. Bussick TJ, McNamara JA Jr. Dentoalveolar and skeletal changes associated with the pendulum appliance. Am J Orthod Dentofacial Orthop 2000;117:333-43.
8. Byloff FK, Darendeliler MA. Distal molar movement using the pendulum appliance. Part 1: Clinical and radiological evaluation. Angle Orthod 1997;67:249-60.
9. Cangialosi TJ, Meistrell ME, Leung MA, et al. A cephalometric appraisal of edgewise Class II nonextraction treatment with extraoral force. Am J Orthod Dentofacial Orthop 1988;93:315-24.
10. Carano A, Testa M. The distal jet for upper molar distalization. J Clin Orthod 1996;30:374-80.
11. Cetlin NM, Ten Hoeve A. Nonextraction treatment. J Clin Orthod 1983;17:396-413.
12. Dahlberg G. Statistical methods for medical and biological students. New York: Interscience Publications, 1940.
13. Erverdi N, Koyuturk O, Kucukkeles N. Nickel-titanium coil springs and repelling magnets: A comparison of two different intra-oral molar distalization techniques. Br J Orthod 1997;24:47-53.
14. Firouz M, Zernik J, Nanda R. Dental and orthopedic effects of high-pull headgear in treatment of Class II, Division I malocclusion. Am J Orthod Dentofacial Orthop 1992;102:197-205.
15. Ghosh J, Nanda RS. Evaluation of an intraoral maxillary molar distalization technique. Am J Orthod Dentofacial Orthop 1996;110: 639-46.
16. Giancotti A, Cozza P. Nickel titanium double-toop system for simultaneous distalization of first and second molars. J Clin Orthod 1998;32:255-60.
17. Gianelly AA, Bednar J, Dietz VS. Japanese NiTi coils used to move molars distally. Am J Orthod Dentofacial Orthop 1991;99: 564-6.
18. Gianelly AA, Vaitas AS, Thomas WM. The use of magnets to move molars distally. Am J Orthod Dentofacial Orthop 1989;96:161-7.
19. Gianelly AA. Distal movement of the maxillary molars. Am J Orthod Dentofacial Orthop 1998;114:66-72.
20. Graber TM. Extraoral force - facts and fallacies. Am J Orthod 1955;41:490-505.
21. Gulati S, Kharbanda OP, Parkash H. Dental and skeletal changes after intraoral molar distalization with sectional jig assembly. Am J Orthod Dentofacial Orthop 1998;114:319-27.
22. Haydar S, Üner O. Comparison of Jones jig molar distalization appliance with extraoral traction. Am J Orthod Dentofacial Orthop 2000; 117:49-53.
23. Heinig N, Göz G. Clinical application and effects of the Forsus™ spring. A study of a new Herbst hybrid. J Orofac Orthop 2001;62: 436-50.
24. Hubbard GW, Nanda RS, Currier GF. A cephalometric evaluation of nonextraction cervical headgear treatment in Class II malocclusions. Angle Orthod 1994;64:359-70.
25. Johnson J. Twin wire alignment appliance. Int J Orthodontia 1934;20:963.
26. Jones RD, White JM. Rapid Class II molar correction with an open-coil jig. J Clin Orthod 1992;26:661-4.
27. Kinzinger G, Fritz U, Diedrich P. Bipendulum and quad pendulum for non-compliance molar distalization in adult patients. J Orofac Orthop 2002;63:154-62.
28. Kinzinger G, Fritz U, Diedrich P. Combined therapy with pendulum and lingual arch appliances in the early mixed dentition. J Orofac Orthop 2003;64:201-13.
29. Kinzinger G, Fuhrmann R, Gross U, et al. Modified pendulum appliance including distal screw and uprighting activation for non-compliance therapy of Class-II malocclusion in children and adolescents. J Orofac Orthop 2000;61:175-90.
30. Kinzinger G, Ostheimer J, Förster F, et al. Development of a new fixed functional appliance for treatment of skeletal Class II malocclusion. J Orofac Orthop 2002;63:384-99.
31. Klein PL. An evaluation of cervical traction on the maxilla and the upper first permanent molar. Angle Orthod 1957;27:61-8.
32. Kloehn SJ. Evaluation of cervical anchorage force in treatment. Angle Orthod 1961;31:91-104.
33. McSherry PF, Bradley H. Class II correction-reducing patient compliance: A review of the available techniques. J Orthod 2000;27: 219-25.
34. Miura F, Mogi M, Ohura Y, et al. The super-elastic Japanese NiTi alloy wire for use in orthodontics. Part III. Studies on the Japanese NiTi alloy coil springs. Am J Orthod Dentofacial Orthop 1988;94:89-96.
35. Muse DS, Fillman MJ, Emmerson WJ, et al. Molar and incisor changes with Wilson rapid molar distalization. Am J Orthod Dentofacial Orthop 1993;104:556-65.
36. Papadopoulos MA. Simultaneous distalization of maxillary first and second molars by means of superelastic NiTi coils. Hell Orthod Rev 1998;1:71-6.
37. Puente M. Class II Correction with an edgewise-modified Nance appliance. J Clin Orthod 1997;31:178-82.
38. Reiner TJ. Modified Nance appliance for unilateral molar distalization. J Clin Orthod 1992;26:402-4.
39. Runge ME, Martin JT, Bukai F. Analysis of rapid maxillary molar distal movement without patient cooperation. Am J Orthod Dentofacial-Orthop 1999;115:153-7.
40. Sinha P. Reply to "LEtter to the Editor". Am J Orthod Dentofacial Orthop 2001;119:12A-3A.
41. Toroglu MS, Uzel I, Ham OY, et al. Cephalometric evaluation of the effects of pendulum appliance on various vertical growth patterns and of the changes during short-term stabilization. Clin Orthod Res 2001;4:15-27.
42. Wieslander L. Early or late cervical traction therapy of Class II malocclusion in the mixed dentition. Am J Orthod 1975;67;432-9.
43. Wieslander L. The effect of orthodontic treatment on the concurrent development of the craniofacial complex. Am J Orthod 1963; 49:15-27.