Development and validation of a cascade atomization and drop breakup model for high-velocity dense sprays

Atomization and Sprays

Volumn 14, Issue 3, 2004, Pages 211-242

  Tanner, Franz X ^a  

^a MICHIGAN TECHNOLOGICAL UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ATOMIZATION; COMPUTER SIMULATION; DROP BREAKUP; MATHEMATICAL MODELS; NOZZLES; PRESSURE EFFECTS; VOLUME FRACTION;

CATASTROPHIC BREAKUP; DROP DISINTEGRATION; FUEL SPRAYS; TAYLOR DROP OSCILLATORS;

SPRAYING;

ATOMIZATION; COMPUTER SIMULATION; DROP BREAKUP; MATHEMATICAL MODELS; NOZZLES; PRESSURE EFFECTS; SPRAYING; VOLUME FRACTION;

EID: 17744391161     PISSN: 10445110     EISSN: None     Source Type: Journal    
DOI: 10.1615/AtomizSpr.v14.i3.20     Document Type: Article

References (60)

1. O. L. Guider, Temporally and Spatially Resolved Drop Sizing of Dense Diesel Sprays, Proc. 2nd ILASS-Americas Annual Meeting, Pittsburgh, PA, pp. 78-81, May 1988.
2. O. L. Guider, G. J. Smallwood, and D. R. Snelling, Diesel Spray Structure Investigation by Laser Diffraction and Sheet Illumination, SAE Paper 920577, 1992.
3. A. J. Yule and D. G. Salters, A Conductivity Probe Technique for Investigating the Breakup of Diesel Sprays, Atomization and Sprays, vol. 4, pp. 41-63, 1994.
4. T.-W. Lee and A. Mitrovic, Liquid Core Structure of Pressure-Atomized Sprays via Laser Tomographic Imaging, Atomization and Sprays, vol. 6, pp. 111-126, 1996.
5. H. Chaves, M. Knapp, A. Kubitzek, F. Obermeier, and T. Schneider, Experimental Study of Caviation in the Nozzle Hole of Diesel Injectors Using Transparent Nozzles, SAE Paper 950290, 1995.
6. N. Tamaki, M. Shimizu, K. Nishida, and H. Hiroyasu, Effects of Cavitation and Internal Flow on Atomization of a Liquid Jet, Atomization and Sprays, vol. 8, pp. 179-197, 1998.
7. A. Yule, A. Dalli, and K. Yeong, Transient Cavitation and Separation in a Scaled-Up Model of a VCO Orifice, Proc., 14th ILASS-Europe Annual Conference, Manchester, England, pp. 230-235, July 1998.
8. C. Arcoumanis and M. Gavaises, Cavitation in Diesel Injectors: Modelling and Experiments, Proc. 14tb ILASS-Europe Annual Conference, Manchester, UK, pp. 248-255, July 1998.
9. H. Hiroyasu, Spray Breakup Mechanism from the Hole-Type Nozzle and Its Applications, Atomization and Sprays, vol. 10, pp. 511-527, 2000.
10. D. Schmidt, C. Rutland, and M. Corradini, A Numerical Study of Cavitating Flow Through Various Nozzle Shapes, SAE Paper 971597, 1997.
11. C. Arcoumanis, M. Gavaises, J. Nouri, E. Abdul-Wahab, and R. W. Horrocks, Analysis of the Flow in the Nozzle of a Vertical Multi Hole Diesel Engine Injector, SAE Paper 980811, 1998.
12. C. Arcoumanis and M. Gavaises, Linking Nozzle Flow with Spray Characteristics in a Diesel Fuel Injection System, Atomization and Sprays, vol. 8, pp. 307-347, 1998.
13. D. Schmidt, J. Rutland, and M. Corradini, A Fully Compressible, Two-Dimensional Model of Small, High-Speed, Cavitating Nozzles, Atomization and Sprays, vol. 9, pp. 255-276, 1999.
14. R. Bunnell, S. Heister, C. Yen, and S. Collicott, Cavitating Injector Flows: Validation of Numerical Models and Simulations of Pressure Atomizers, Atomization and Sprays, vol. 9, pp. 445-466, 1999.
15. X. Changhai, R. Bunnell, and S. Heister, On the Influence of Internal Flow Structure on Performance of Plain-Orifice Atomizers, Atomization and Sprays, vol. 11, pp. 335-350, 2001.
16. G. Smallwood and O. Gülder, Views on the Structure of Transient Diesel Sprays, Atomization and Sprays, vol. 10, pp. 355-386, 2000.
17. W. Sirignano and C. Mehring, Review of Theory of Distortion and Disintegration of Liquid Streams, Progr. Energy Combust. Sci., vol. 26, pp. 609-655, 2000.
18. Y. Yue, C. Powell, R. Poola, J. Wang, and J. Schaller, Quantitative Measurements of Diesel Fuel Spray Characteristics in the Near-Nozzle Region Using X-Ray Absorption, Atomization and Sprays, vol. 11, no. 4, pp. 471-490, 2001.
19. F. X. Tanner and K. Boulouchos, A Computational Investigation of the Spray-Induced Flow and Its Influence on the Fuel Distribution for Continuous and Intermittent DI-Diesel Sprays, SAE Paper 960631, 1996.
20. P. J. O'Rourke and A. A. Amsden, The TAB Method for Numerical Calculation of Spray Droplet Breakup, SAE Paper 872089, 1987.
21. G. I. Taylor, The Shape and Acceleration of a Drop in a High Speed Air Stream, in G. K. Batchelor (ed.), The Scientific Papers of Sir Geoffrey Ingram Taylor, vol. 3, pp. 457-464, Cambridge University Press, 1963.
22. L. Allocca, F. E. Corcione, A. Fusco, F. Papetti, and S. Succi, Modeling of Diesel Spray Dynamics and Comparison with Experiments, SAE Paper 941895, 1994.
23. Z. Han, S. Parrish, P. Farrell, and R. Reitz, Modeling Atomization Processes of Pressure-Swirl Hollow-Cone Fuel Sprays Applications, Atomization and Sprays, vol. 7, pp. 663-684, 1997.
24. L. Fan, G. Li, Z. Han, and R. Reitz, Multidimensional Modeling of Spray Atomization and AirFuel Mixing in a Direct-Injection Spark-Ignition Engine, SAE Paper 1999-01-0175, 1999.
25. R. D. Reitz, Modeling Atomization Processes in High-Pressure Vaporizing Sprays, Atomization Spray Technol., vol. 3, pp. 309-337, 1987.
26. R. D. Reitz and R. Diwakar, Structure of High-Pressure Fuel Sprays, SAE Paper 870598, 1987.
27. R. D. Reitz and F. V. Bracco, Mechanisms of Breakup of Round Liquid Jets, Encyclopedia of Fluid Mechanics, vol. 3, pp. 233-249, Gulf Pub., NJ, 1986.
28. T. F. Su, M. A. Patterson, R. D. Reitz, and P. V. Farrell, Experimental and Numerical Studies of High Pressure Multiple Injection Sprays, SAE Paper 960861, 1996.
29. L. Ricart, J. Xin, G. R. Bower, and R. D. Reitz, In-Cylinder Measurement and Modeling of Liquid Fuel Spray Penetration in a Heavy-Duty Diesel Engine, SAE Paper 971591, 1997.
30. C. Habchi, D. Verhoeven, C. H. Huu, L. Lambert, J. L. Vanhemelryck, and T. Baritaud, Modeling Atomization and Break Up in High-Pressure Diesel Sprays, SAE Paper 970881, 1997.
31. M. Pilch and C. Erdman, Use of Breakup Time Data and Velocity History Data to Predict the Maximum Size of Stable Fragments for Acceleration-Induced Breakup of Liquid Drops, Int. J. Multiphase Flow, vol. 13, no. 6, pp. 741-757, 1987.
32. A. Nishimura and D. Assanis, A Model for Primary Diesel Fuel Atomization Based on Caviation Bubble Collapse Energy, Proc. 8th Int. Conf. on Liquid Atomization and Spray Systems, Pasadena, CA, July 2000.
33. Y. Yi and R. Reitz, Modeling the Effect of Primary Atomization on Diesel Engine Emissions, SAE Paper 2003-01-1041, 2003.
34. F. X. Tanner, Liquid Jet Atomization and Droplet Breakup Modeling of Nonevaporating Diesel Fuel Sprays, SAE Trans. J. Engines, vol. 106, no. 3, pp. 127-140, 1998.
35. F. X. Tanner and G. Weisser, Simulation of Liquid Jet Atomization for Fuel Sprays by Means of a Cascade Drop Breakup Model, SAE Paper 980808, 1998.
36. A. B. Liu and R. D. Reitz, Mechanisms of Air-Assisted Liquid Atomization, Atomization and Sprays, vol. 3, pp. 55-75, 1993.
37. P. Rodatz, G. Weisser, and F. Tanner, Assessment of CFD Methods for Large Diesel Engines Equipped with a Common Rail Injection System, SAE Trans. J. Engines, vol. 109, no. 3, pp. 1063-1074, 2001.
38. F. X. Tanner, M. Brunner, and G. Weisser, A Computational Investigation of Water Injection Strategies for Nitric Oxide Reduction in Large-Bore DI Diesel Engines, SAE Paper 2001-01-1069, 2001.
39. M. Larmi, P. Rantanen, J. Tiainen, J. Kiijärvi, F. X. Tanner, and K. Stalsberg-Zarling, Simulation of Nonevaporating Diesel Sprays and Verification with Experimental Data, SAE Paper 2002-01-0946, 2002.
40. O. Kaario, M. Larmi, and F. X. Tanner, Nonevaporating Liquid Spray Simulations with the ETAB and Wave Droplet Breakup Models, Proc., 18th ILASS-Europe Annual Conference, Zaragoza, Spain, pp. 49-54, September 2002.
41. S. Hou, S. Are, and D. P. Schmidt, A Generalized Adaptive Collision Mesh for Multiple Injector Orifices, 13th Int. Multidimensional Engine Modeling Meeting, Detroit, MI, March 2003.
42. R. D. Reitz and F. Bracco, Mechanism of Atomization of a Liquid Jet, Phys. Fluids, vol. 25, pp. 1730-12, 1982.
43. st CIMAC Congress 1995, Interlaken, Switzerland, May 1995.
44. H. Hiroyasu and T. Kadota, Fuel Droplet Size Distribution in Diesel Combustion Chamber, SAE Paper 740715, 1974.
45. H. Koß D. Brüggemann, A. Wiartalla, H. Bäcker, and A. Breuer, Results from Fuel/Air Ratio Measurements in an N-Heptane Injection Spray, IDEA periodic report, RWTH Aachen, 1992.
46. F. X. Tanner, Validation of an Auto-Ignition Model Based on a Transport Equation of a Characteristic Ignition Progress Variable, Proc. 15tb ILASS-Americas Annual Conference, Madison, Wisconsin, pp. 98-102, May 2002.
47. U. Reuter, Kammerversuche zur Strahlausbreitung und Zündung bei dieselmotorischer Einspritzung, PhD thesis, RWTH, Aachen, 1989.
48. R. Bellman and R. H. Pennington, Effects of Surface Tension and Viscosity on Taylor Instability, Q. Appl. Math., vol. 12, no. 2, 1954.
49. M. Patterson and R. Reitz, Modeling the Effects of Fuel Spray Characteristics on Diesel Engine Combustion and Emission, SAE Paper 980131, 1998.
50. A. A. Amsden, P. J. O'Rourke, and T. D. Butler, KIVA II: A Computer Program for Chemically Reactive Flows with Sprays, Tech. Rep. LA-11560-MS, Los Alamos National Laboratory, May 1989.
51. V. G. Levich, Physicochemical Hydrodynamics, Prentice Hall, Englewood Cliffs, NJ, pp. 639-650, 1962.
52. G. Weisser, F. Tanner, and K. Boulouchos, Modeling of Ignition and Early Flame Development with Respect to Large Diesel Engine Simulation, SAE Trans. J. Fuels Lubricants, vol. 107, no. 4, pp. 802-811, 1999.
53. J. Inhelder, C. E. Frouzakis, and K. Boulouchos, A Discussion of Approaches for Predicting End-Gas Autoignition in Homogeneous Charge Engines, LW Internal Report 93/20, ETHZ, 1993.
54. C. Espey and J. E. Dec, Planar Laser Rayleigh Scattering for Quantitative Vapor-Fuel Imaging in a Diesel Jet, Combust. Flame, vol. 109, pp. 65-86, 1997.
55. B. Higgins, D. Siebers, and A. Aradi, Diesel-Spray Ignition and Premixed-Burn Behavior, SAE Paper 2000-01-0940, 2000.
56. T. Kim and J. B. Ghandhi, Quantitative 2-D Fuel Vapor Concentration Measurements in an Evaporating Diesel Spray Using the Exciplex Fluorescence Method, SAE Paper 2001-01-3495, 2001.
57. A. A. Amsden, KIVA-3: A KIVA Program with Block-Structured Mesh for Complex Geometries, Tech. Rep. LA-12503-MS, Los Alamos National Laboratory, March 1993.
58. Z. Y. Han and R. D. Reitz, Turbulence Modeling of Internal Combustion Engines Using RNG k-ε Models, Combust. Sci. Technol., vol. 106, pp. 267-295, 1995.
59. J. Abraham, F. V. Bracco, and R. D. Reitz, Comparisons of Computed and Measured Premixed Charge Engine Combustion, Combust. Flame, vol. 60, pp. 309-322, 1985.
60. S.-C. Kong and R. D. Reitz, Multidimensional Modeling of Diesel Ignition and Combustion Using a Multistep Kinetics Model, J. Eng. Gas Turb. Power, vol. 115, pp. 781-789, 1993.