Fracture behavior of lithia disilicate- and leucite-based ceramics

Dental Materials

Volumn 20, Issue 10, 2004, Pages 956-962

  Della Bona, Alvaro ^a   Mecholsky Jr , John J ^b   Anusavice, Kenneth J ^c  

^a UNIVERSITY OF PASSO FUNDO   (Brazil)

^b University of Florida   (United States)

^c UNIVERSITY OF FLORIDA   (United States)

Author keywords

Fractography; Fracture; Fracture toughness; Structural reliability; Weibull modulus

Indexed keywords

BENDING STRENGTH; CRACK PROPAGATION; DENTAL MATERIALS; ERROR ANALYSIS; FRACTOGRAPHY; FRACTURE; FRACTURE TOUGHNESS; SILICATES; STRESS INTENSITY FACTORS; WEIBULL DISTRIBUTION;

DENTAL CERAMICS; STRUCTURAL PERFORMANCE; STRUCTURAL RELIABILITY; WEIBULL MODULUS;

CERAMIC MATERIALS;

ALUMINUM SILICATE; GLASS; IPS EMPRESS CERAMIC; IPS-EMPRESS CERAMIC; LEUCITE; LITHIA DISILICATE;

ANALYSIS OF VARIANCE; ARTICLE; DENTAL CARE; ELASTICITY; EQUIPMENT; HARDNESS; MATERIALS TESTING; NONPARAMETRIC TEST; PLIABILITY; REGRESSION ANALYSIS; SCANNING ELECTRON MICROSCOPY; SURVIVAL; TOOTH PROSTHESIS;

ALUMINUM SILICATES; ANALYSIS OF VARIANCE; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; ELASTICITY; EQUIPMENT FAILURE ANALYSIS; GLASS; HARDNESS; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; PLIABILITY; REGRESSION ANALYSIS; STATISTICS, NONPARAMETRIC; SURVIVAL ANALYSIS;

EID: 12444332060     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2004.02.004     Document Type: Article

References (27)

1. Griffith A.A. The phenomena of rupture and flow in solids. Philos Trans R Soc. 221:1920;163-198
2. West J.K., Mecholsky J.J. Jr, Hench L.L. The application of fractal and quantum geometry to brittle fracture. J Non-Cryst Solids. 260:1999;99-108
3. Mecholsky J.J. Jr. Fractography: determining the sites of fracture initiation. Dent Mater. 11:1995;113-116
4. Anstis G.R., Chantikul P., Lawn B.R., Marshall D.B. A critical evaluation of indentation techniques for measuring fracture toughness: I. Direct crack measurements. J Am Ceram Soc. 64:1981;533-538
5. Chantikul P., Anstis G.R., Lawn B.R., Marshall D.B. A critical evaluation of indentation techniques for measuring fracture toughness: II. Strength method. J Am Ceram Soc. 64:1981;539-543
6. IC) of a dental porcelain determined by fractographic analysis. Dent Mater. 15:1999;342-348
7. Randall P.N. Plain strain crack toughness testing of high strength metallic materials. Brown W.F. Jr, Strawley J.E. ASTM STP 410. 1966;88-126 American Society for Testing and Materials, Philadelphia
8. Mecholsky J.J. Jr, Freiman S.W., Rice R.W. Fractographic analysis of ceramics. Strauss B.M., Cullen W.H. Fractography in failure analysis, ASTM STP 645. 1978;363-379 American Society for Testing and Materials, Philadelphia
9. Mecholsky J.J. Jr. Fracture mechanics principles. Dent Mater. 11:1995;111-112
10. Anusavice K.J. Phillips' science of dental materials. 11th ed. :2003;Saunders, an imprint of Elsevier Science, St. Louis, MO
11. Della Bona A., Anusavice K.J., DeHoff P.H. Weibull analysis and flexural strength of hot-pressed core and veneered ceramic structures. Dent Mater. 19:2003;662-669
12. Ban S., Anusavice K.J. Influence of test method on failure stress of brittle dental materials. J Dent Res. 69:1990;1791-1799
13. Rice R.W. Ceramic fracture features, observations, mechanisms, and uses. Mecholsky J.J. Jr, Powell S.R. Jr. Fractography of ceramic and metal failures, ASTM STP 827. 1984;5-103 American Society for Testing and Materials, Philadelphia
14. Fréchette V.D. Advances in ceramics: failure analysis of brittle materials. vol. 28:1990;American Ceramic Society, Westerville, OH
15. Della Bona A., Anusavice K.J., Mecholsky J.J. Jr. Failure analysis of resin composite bonded to ceramic. Dent Mater. 19:2003;693-699
16. Irwin G.R. Analysis of stresses and strains near the end of crack transversing a plate. J Appl Mech. 24:1957;361-364
17. Hertzberg R.W. Deformation and fracture mechanics of engineering materials. 4th ed. :1996;Wiley, New York
18. Weibull W. A statistical theory of the strength of materials. Ing Vetensk Akad Proc. 151:1939;1-45
19. Ritter J.E. Critique of test methods for lifetime predictions. Dent Mater. 11:1995;147-151
20. Kelly J.R., Campbell S.D., Bowen H.K. Fracture-surface analysis of dental ceramics. J Prosthet Dent. 62:1989;536-541
21. Kelly J.R., Giordano R., Pober R., Cima M.J. Fracture surface analysis of dental ceramics: clinically failed restorations. Int J Prosthodont. 3:1990;430-440
22. Thompson J.Y., Anusavice K.J., Naman A., Morris H.F. Fracture surface characterization of clinically failed all-ceramic crowns. J Dent Res. 73:1994;1824-1832
23. Höland W., Schweiger M., Frank M., Rheinberger V. A comparison of the microstructure and properties of the IPS Empress 2 and the IPS Empress glass-ceramics. J Biomed Mater Res. 53:2000;297-303
24. Drummond J.L., King T.J., Bapna M.S., Koperski R.D. Mechanical property evaluation of pressable restorative ceramics. Dent Mater. 16:2000;226-233
25. Fischer H., Marx R. Fracture toughness of dental ceramics: comparison of bending and indentation methods. Dent Mater. 18:2002;12-19
26. Thompson G.A. Influence of relative layer height and testing method on the failure mode and origin in a bilayered dental ceramic composite. Dent Mater. 16:2000;235-243
27. Mecholsky J.J. Jr. Quantitative fracture surface analysis of glass materials. Simmons C.J., El-Bayoumi O. Experimental techniques of glass science. 1993;483-520 American Ceramic Society, Westerville, OH