Fracture of aluminium reinforced with densely packed ceramic particles: Link between the local and the total work of fracture

Acta Materialia

Volumn 52, Issue 5, 2004, Pages 1337-1351

  Miserez, A ^a   Rossoll, A ^a   Mortensen, A ^a  

^a Bâtiment des Matériaux   (Switzerland)

Author keywords

Fracture; Liquid infiltration; Metal matrix composites; Toughness; Valve effect

Indexed keywords

ALUMINUM; CERAMIC MATERIALS; CRACKS; FRACTURE TOUGHNESS; INTERFACIAL ENERGY; MICROSTRUCTURE; NUCLEATION; STRESSES;

FRACTURE ENERGY; LIQUID INFILTRATION; PLASTIC DISSIPATION; VALVE EFFECT;

METALLIC MATRIX COMPOSITES;

EID: 1242306723     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actamat.2003.11.019     Document Type: Article

References (90)

1. Hunt W.H., Osman T.M., Lewandowski J.J. JOM. 45:1993;30-35.
2. Mortensen A. Masounave J., Hamel F.G. Proc of the Conf on Fabrication of Particulates Reinforced Metal Composites, Montréal, Qué. Canada. 1990;217-233 ASM International.
3. Lloyd D.J. Int. Mater. Rev. 39:1994;1-23.
4. Lewandowski J.J., Singh P.M. Lewandowski J.J., Hunt J.W.H. Proc of the Conf on Intrinsic and Extrinsic Fracture Mechanisms in Inorganic Composite Systems. 1995;129-146 The Minerals, Metals & Materials Society.
5. Lewandowski J.J. Clyne T.W. Comprehensive composite materials. Metal matrix composites. vol. 3:2000;151-187 Elsevier, Amsterdam.
6. Sinclair I., Gregson P.J. Mater. Sci. Technol. 13:1997;709-725.
7. Davidson D.L. Composites. 24:1993;248-255.
8. Hunt W.H. Lewandowski J.J., Hunt J.W.H. Proc of the Conf on Intrinsic and Extrinsic Fracture Mechanisms in Inorganic Composite Systems, Las Vegas, Nevada. 1995;31-38 The Minerals, Metals & Materials Society.
9. Leggoe J.W., Hu X.Z., Bush M.B. Eng. Fract. Mech. 53:1996;873-895.
10. Kamat S.V., Hirth J.P., Mehrabian R. Acta Metall. 9:1989;2395-2402.
11. Flom Y., Arsenault R.J. Acta Metall. 37:1989;2413-2423.
12. Manoharan M., Lewandowski J.J. Acta Metall. Mater. 38:1990;489-496.
13. Hadianfard M.J., Heness G., Healy J.C., Mai Y.-W. Fatigue Fract. Eng. Mater. Struct. 17:1994;253-263.
14. Pestes R.H., Kamat S.V., Hirth J.P. Mater. Sci. Eng. A. 189:1994;9-14.
15. Rabiei A., Kim B.N., Enoki M., Kishi T. Mater. Trans., JIM. 37:1996;1148-1155.
16. Song S.G., Shi N., Gray G.T., Roberts J.A. Metall. Mater. Trans. 27A:1996;3739-3746.
17. Pandey A.B., Majumdar B.S., Miracle D.B. Metall. Mater. Trans. A. 31:2000;921-936.
18. Davidson D.L. Metall. Trans. A. 18:1987;2115-2128.
19. Miserez A, Rossoll A, Mortensen A, Eng Fract Mech 2003, accepted.
20. Knott J.F., Boccaccini A.R. Meyers M.A., Armstrong R.W., Kirchner H.O.K. Mechanics and Materials: Fundamentals and Linkages. 1999;399-427 John Wiley & Sons, New York.
21. Kolednik O. Eng. Fract. Mech. 38:1991;403-412.
22. Turner C.E., Kolednik O. Fatigue Fract. Eng. Mater. Struct. 17:1994;1089-1107.
23. Stampfl J., Kolednik O. Int. J. Fract. 101:2000;321-345.
24. Poech M.H., Fischmeister H.F. Eng. Fract. Mech. 43:1992;581-588.
25. Stüwe H.P. Eng. Fract. Mech. 13:1980;231-236.
26. Stüwe H.P. Nemat-Nasser S. Proc of the Conf on Three-dimensional Constitutive Relations and Ductile Fracture. 1981;213-221 N-H Publishing, Dourdan.
27. Gilman J.J. Lee E.H., Symonds P.S. Plasticity. 1960;43-99 Pergamon Press, Oxford.
28. Rice J.R. Yokobori T., Kawsaki T., Swedlow J.L. Proc of the Third Int Conf on Fracture, Sendai. 1965;309-340 Japanese Soc. for Strength and Fracture of Metals.
29. Jokl M.L., Vitek V., McMahon C.J. Acta Metall. 28:1980;1479-1488.
30. Suo Z., Shih C.F., Varias A.G. Acta Metall. Mater. 41:1993;1551-1557.
31. Lipkin D.M., Beltz G.E. Acta Mater. 4:1996;1287-1291.
32. Lipkin D.M., Clarke D.R., Beltz G.E. Acta Mater. 44:1996;4051-4058.
33. Beltz G.E., Rice J.R., Shih C.F., Xia L. Acta Mater. 44:1996;3943-3954.
34. Beltz G.E., Lipkin D.M. MRS Bull. 25:2000;21-26.
35. Kysar J.W. J. Mech. Phys. Solids. 51:2003;795-824.
36. Gerberich W.W. Wells J.M., Landes J.D. Fracture: interactions of microstructure, mechanisms and mechanics. 1984;49-74 TMS, Warrendale, PA.
37. Hirth J.P., Froes F.H. Metall. Trans. 8A:1977;1165-1176.
38. Pineau A. Argon A.S. Topics in fracture and fatigue. 1992;197-234 Springer, New York.
39. Tvergaard V., Hutchinson J.W. J. Mech. Phys. Solids. 40:1992;1377-1397.
40. Tvergaard V., Hutchinson J.W. Int. J. Solids. Struct. 33:1996;3297-3308.
41. Siegmund T., Brocks W. Paris P.C., Jerina K.L. Fatigue and fracture mechanics: vol. 30. ASTM STP 1360. 2000;139-151 ASTM, West Conshohocken, PA, USA.
42. Li H., Chandra N. Int. J. Plasticity. 19:2003;849-882.
43. Tvergaard V. Willis J.R. Proc of the Conf on IUTAM Symposium on Nonlinear Analysis of Fracture. 1997;93-104 Kluwer Academic Publishers, Dordrecht.
44. Hutchinson J.W. Willis J.R. Proc of the Conf on IUTAM Symposium on Nonlinear Analysis of Fracture. 1997;81-91 Kluwer Academic Publishers, Dordrecht.
45. Hutchinson J.W., Evans A.G. Acta Mater. 48:2000;125-135.
46. Michaud V.J. Suresh S., Mortensen A., Needleman A. Fundamentals of metal matrix composites. 1993;3-22 Butterworth-Heinemann, London.
47. Mortensen A., Michaud V.J., Flemings M.C. JOM. 45:1993;36-43.
48. Mortensen A. Clyne T.W. Comprehensive composite materials. Metal matrix composites. vol. 3:2000;521-554 Elsevier, Amsterdam.
49. Garcia-Cordovilla C., Louis E., Narciso J. Acta Mater. 47:1999;4461-4479.
50. SanMarchi C., Kouzeli M., Miserez A., Moser B., Rossoll A., Weber L., et al. Song J., Yin R. ICETS 2000-Session 3: Proc of the Advanced Materials Conference, Beijing, China. 2000;74-82 New World Press.
51. Kouzeli M., Weber L., SanMarchi C., Mortensen A. Acta Mater. 49:2001;3699-3709.
52. Miserez A, Fracture and toughening of high volume fraction ceramic particle reinforced metals. Ph.D. Thesis, No. 2703, Ecole Polytechnique Fédérale de Lausanne - EPFL. Available from: library.epfl.ch/theses/?display=detail&NR=2703.
53. Viala J.C., Bouix J., Gonzalez G., Esnouf C. J. Mater. Sci. 1997;4559-4573.
54. Meyer F.D., Hillbrecht H. J. Alloys Compd. 252:1997;98-102.
55. Viala JC, Peronnet M, Bosselet F, Bouix J, In: Massard T, Vautrin A, editors. Proc of the 12th Int Conf on Composite Materials, Paris, 1999 ed.
56. Kouzeli M., SanMarchi C., Mortensen A. Mater. Sci. Eng. A337:2002;264-273.
57. Kouzeli M., Mortensen A. Acta Mater. 50:2002;39-51.
58. E 1737-96: Standard test method for J -integral characterization of fracture toughness. Philadelphia: ASTM; 1996. p. 957-80.
59. Brocks W., Schmitt W. Kirk M., Bakker A. Constraints effects in fracture, theory and applications: vol. 2. ASTM STP 1244. 1995;209-231 ASTM, Philadelphia.
60. Merkle J.G. Reuter W.G., Underwood J.H., Newman J.C. Fracture mechanics: vol. 26. ASTM STP 1256. 1995;3-40 ASTM, Philadelphia.
61. Parks D.M. Blauel J.G., Schwalbe K.-H. Proc of the European Symposium on Elastic-Plastic Fracture Mechanics: Defect Assessment in Components - Fundamentals and Applications, Freiburg, Germany. 1991;205-231 Mechanical Engineering Publications, London.
62. Stampfl J., Scherer S., Gruber M., Kolednik O. Appl. Phys. A. 63:1996;341-346.
63. Stampfl J., Scherer S., Berchthaler M., Gruber M., Kolednik O. Int. J. Fract. 78:1996;35-44.
64. Anderson T.L. Fracture mechanics. 2nd ed. 1995;CRC Press, Boca Raton (FL).
65. Hutchinson J.W., Paris P.C. Landes J.D., Begley J.A., Clarke G.A. Elastic-plastic fracture. ASTM STP 668. 1979;37-64 ASTM.
66. Hutchinson J.W. J. Appl. Mech. 50:1983;1042-1051.
67. Wegner L.D., Gibson L.J. Int. J. Mech. Sci. 43:2001;1771-1791.
68. Ashby M.F., Blunt F.J., Bannister M. Acta Metall. 37:1989;1847-1857.
69. Sigl L.S., Mataga P.A., Dalgleish B.J., McMeeking R.M., Evans A.G. Acta Metall. 36:1988;945-953.
70. Tvergaard V. Comput. Mech. 20:1997;186-191.
71. Tvergaard V. Int. J. Mech. Sci. 42:2000;381-395.
72. Bannister M., Ashby M.F. Acta Metall. Mater. 39:1991;2575-2582.
73. Miserez A, Müller R, Rossoll A, Weber L, Mortensen A, In: Proc of the 13th Int Conf on the Strength and Fracture of Materials - Special issue (ICSMA 13), Budapest, 2003, Mater. Sci. Eng. A, accepted for publication.
74. Davidson D.L. J. Mater. Sci. 24:1989;681-687.
75. Evans A.G., Dalgleish B.J. Acta Metall. Mater. 40:1992;s295-s306.
76. Evans A.G., Dalgleish B.J. Mater. Sci. Eng. A. 162:1993;1-13.
77. McNaney J.M., Cannon R.M., Ritchie R.O. Acta Mater. 44:1996;4713-4728.
78. Evans A.G., Hutchinson J.W., Wei Y. Acta Mater. 47:1999;4093-4113.
79. Lipkin D.M., Clarke D.R., Evans A.G. Acta Mater. 46:1998;4835-4850.
80. Wei Y., Hutchinson J.W. Int. J. Fract. 95:1999;1-17.
81. Saiz E., Cannon R.M., Tomsia A.P. Acta Mater. 47:1999;4209-4220.
82. Rice J.R., Wang J.S. Mater. Sci. Eng. A. 107:1989;23-40.
83. Zhang W., Smith J.R., Evans A.G. Acta Mater. 50:2002;3803-3816.
84. Korn D., Elssner G., Cannon R.M., Rühle M. Acta Mater. 50:2002;3881-3901.
85. Cannon R.M., Korn D., Elssner G., Rühle M. Acta Mater. 50:2002;3903-3925.
86. Sglavo V.M., Trentini E., Boniecki M. J. Mater. Sci. Lett. 18:1999;1127-1130.
87. Cawley J.D. Buschow K.H., Flemings M.C., Kramer E.J., Cahn R.W., Ilschner B., Mahajan S. Encyclopedia of materials science and technology. 2001;524-533 Elsevier, Amsterdam.
88. Tressler R.E. Buschow K.H., Flemings M.C., Kramer E.J., Cahn R.W., Ilschner B., Mahajan S. Encyclopedia of materials science and technology. 2001;8913-8921 Elsevier, Amsterdam.
89. DeWith G. J. Mater. Sci. 19:1984;457-466.
90. Parvizi-Majidi A. Comprehensive composite materials. Fiber reinforcements and general theory of composites. vol. 1:2000;175-198 Elsevier, Amsterdam.