Titanium release from implants prepared with different surface roughness: An in vitro and in vivo study

Clinical Oral Implants Research

Volumn 15, Issue 5, 2004, Pages 505-512

  Wennerberg, Ann ^a,e   Ide Ektessabi, Ari ^b   Hatkamata, Shino ^b   Sawase, Takashi ^c   Johansson, Carina ^a   Albrektsson, Tomas ^a   Martinelli, Anna ^d   Södervall, Ulf ^d   Odelius, Hans ^d  

^a UNIVERSITY OF GOTHENBURG   (Sweden)

^b KYOTO UNIVERSITY   (Japan)

^c NAGASAKI UNIVERSITY   (Japan)

^d CHALMERS UNIVERSITY OF TECHNOLOGY   (Sweden)

^e Institute of Surgical Sciences   (Sweden)

Author keywords

Implant; in vitro; in vivo; Ion release; SIMS; SRXRF

Indexed keywords

LACTIC ACID; PHOSPHATE; SODIUM CHLORIDE; TITANIUM; ALUMINUM OXIDE;

AQUEOUS SOLUTION; ARTICLE; BONE TISSUE; CONCENTRATION (PARAMETERS); CORRELATION ANALYSIS; MASS SPECTROMETRY; NONHUMAN; RABBIT; RISK ASSESSMENT; SYNCHROTRON; TOOTH IMPLANTATION; X RAY FLUORESCENCE; ANIMAL; BONE MARROW; CHEMISTRY; COMPARATIVE STUDY; DENTAL SURGERY; MATERIALS TESTING; SPECTROMETRY; SURFACE PROPERTY; TIBIA; TIME; TOOTH PROSTHESIS;

AIR ABRASION, DENTAL; ALUMINUM OXIDE; ANIMALS; BONE MARROW; DENTAL IMPLANTS; DENTAL PROSTHESIS DESIGN; LACTIC ACID; MATERIALS TESTING; PHOSPHATES; RABBITS; SODIUM CHLORIDE; SPECTROMETRY, MASS, SECONDARY ION; SPECTROMETRY, X-RAY EMISSION; SURFACE PROPERTIES; TIBIA; TIME FACTORS; TITANIUM;

EID: 12144252348     PISSN: 09057161     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1600-0501.2004.01053.x     Document Type: Article

References (32)

1. Albrektsson, T. & Wennerberg, A. (1999) Die klinische Bedeutung verschiedener Oberflächeneigenschaften enossaler Titanimplantate. Implantologie 3: 249-268.
2. Arvidsson, K., Bystedt, H., Frykholm, A., von Konow, L. & Lothigius, E. (1998) Five-year prospective follow-up report of the Astra Tech dental implant system in the treatment of edentulous mandibles. Clinical Oral Implants Research 9: 225-234.
3. Åstrand, P., Anzén, B., Karlsson, U., Saltholm, S., Svärdström, P. & Hellem, S. (2000) Nonsubmerged implants in the treatment of the edentulous upper jaw: a prospective clinical and radiographic study of ITI implants - Results after 1 year. Clinical Implant Dentistry & Related Research 2: 166-174.
4. Becker, W., Becker, B., Ricci, A., Bahat, O., Rosenberg, E., Rose, L., Handelsman, M. & Israelson, H. (2000) A prospective, multicenter clinical trial comparing one- and two-stage titanium screw shaped fixtures with one-stage plasma-sprayed solid-screw fixtures. Clinical Implant Dentistry & Related Research 2: 159-165.
5. Bianco, P.D., Ducheyne, P. & Cuckler, J.M. (1996) Local accumulation of titanium released from a titanium implant in the absence of wear. Journal of Biomedical Materials Research 31: 227-234.
6. Buser, D., Nydegger, T., Hirt, H.P., Cochran, D. & Nolte, L. (1998) Removal torque values of titanium implants in the maxilla of miniture pigs. International Journal of Oral & Maxillofacial Implants 13: 611-619.
7. Carlsson, L., Röstlund, T., Albrektsson, & Albrektsson, T. (1988) Removal torques for polished and rough titanium implants. International Journal of Oral & Maxillofacial Implants 3: 21-24.
8. Cochran, D.L., Buser, D., tenBruggenkate, C.M., Weingart, D., Taylor, T.M., Bernard, J.P., Peters, F. & Simpson, J.P. (2002) The use of reduced healing times on ITI implants with a sandblasted and acid-etched (SLA) surface: early results from clinical trials on ITI SLA implants. Clinical Oral Implants Research 13: 144-153.
9. 2-blasted surface. Journal of Prosthodontics 10: 2-7.
10. Karlsson, U., Gotfredsen, K. & Olsson, C. (1998) A 2-year report on maxillary and mandibular fixed partial dentures supported by Astra Tech dental implants. A comparison of 2 implants with different surface textures. Clinical Oral Implants Research 9: 235-242.
11. Lindhe, J. (1997) Prospective clinical trials on implant therapy in the partially edentulous dentition using the Astratech dental implant system. 13th European conference on biomaterials, European Society for Biomaterials, Transactions of workshops, Göteborg, Sweden, p. 9.
12. Lodding, A., Fischer, P.M., Odelius, H., Norén, J.G., Sennerby, L., Johansson, C., Chabala, J.M. & Levisetti, R. (1990) Secondary ion mass spectroscopy in the study of biomineralizations and biomaterials. Analytica Chimica Acta 241: 299-314.
13. Norton, M. (1998) Marginal bone levels at single tooth implants with a conical fixture design. The influence of surface macro- and microstructure. Clinical Oral Implants Research 9: 91-99.
14. Osborn, J.F., Willich, P. & Meenen, N. (1990) The release of titanium into human bone from a titanium implant coated with plasma-sprayed titanium. In: Heimke, G., Soltész, U. & Lee, A.J.C., eds. Clinical implant materials. Advances in biomaterials, Vol. 9, 75-80. Amsterdam: Elsevier Science Publishers B.V.
15. Palmer, R., Palmer, P. & Smith, B. (2000) A 5-year prospective study of Astra single tooth implants. Clinical Oral Implants Research 11: 179-182.
16. Savarino, L., Stea, S., Ciapetti, G., Granchi, D., Donati, M.E., Cervellati, M., Visentin, M., Moroni, A. & Pizzoferrato, A. (1998) The interface of bone microstructure and an innovative coating: an X-ray diffraction study. Journal of Biomedical Materials Research 40: 86-91.
17. Schliephake, H., Reiss, G., Urban, R. & Neukam, F.W. (1993) Metal release from titanium fixtures during placement in the mandible: an experimental study. International Journal of Oral & Maxillofacial Implants 8: 502-511.
18. Shimojo, N., Homma-Takeda, S., Ohuchi, K., Shinyashiki, M., Sun, G.F. & Kumagai, Y. (1997) Mercury dynamics in hair of rats exposed to methylmercur by synchrotron radiation X-ray fluorescence imaging. Life Science 60: 2129-2137.
19. Testori, T., Del Fabbro, M., Feldman, S., Vincenzi, G., Sullivan, D., Rossi, R. Jr, Anitua, E., Bianchi, F., Francetti, L. & Weinstein, R.L. (2002) A multicenter prospective evaluation of 2-months loaded Osseotite implants placed in the posterior jaws: 3-year follow up results. Clinical Oral Implants Research 13: 154-161.
20. Testori, T., Wiseman, L., Woolfe, S. & Porter, S.S. (2001) A prospective multicenter clinical study of the Osseotite implant: four-year interim report. International Journal of Oral & Maxillofacial Implants 16: 193-200.
21. Tsutsui, T., Kawaguchi, H., Fujino, A., Sakai, A., Kaji, H. & Nakamura, T. (1999) Exposure of macrophage-like cells to titanium particles does not affect bone resorption, but inhibits bone formation. Journal of Orthopaedic Sciences 4: 32-38.
22. Wennerberg, A. & Albrektsson, T. (2000) Suggested guidelines for the topographic evaluation of implant surfaces. International Journal of Oral & Maxillofacial Implants 15: 331-344.
23. Wennerberg, A., Albrektsson, T. & Andersson, B. (1995b) An animal study of c.p. titanium screws with different surface topographies. Journal of Materials Science: Materials in Medicine 6: 302-309.
24. Wennerberg, A., Albrektsson, T. & Andersson, B. (1996c) Bone tissue response to commercially pure titanium implants blasted with fine and coarse particles of aluminum oxide. International Journal of Oral & Maxillofacial Implants 11: 38-45.
25. Wennerberg, A., Albrektsson, T., Andersson, B. & Krol, J.J. (1995a) A histomorphometric and removal torque study of screw-shaped titanium implants with three different surface topographies. Clinical Oral Implants Research 6: 24-30.
26. Wennerberg, A., Albrektsson, T., Johansson, C.B. & Andersson, B. (1996a) Experimental study of turned and grit blasted screw-shaped implants with special emphasis on effects of blasting material and surface topography. Biomaterials 17: 15-22.
27. Wennerberg, A., Albrektsson, T. & Lausmaa, J. (1996b) A torque and histomorphometric evaluation of c.p. titanium screws, blasted with 25 and 75 μm sized particles of Al2O3. Journal of Biomedical Materials Research 30: 251-260.
28. Wennerberg, A., Albrektsson, T., Ulrich, H. & Krol, J.J. (1992) An optical three-dimensional technique for topographical description of surgical implants. Journal of Biomedical Engineering 14: 412-418.
29. Wennerberg, A., Ektessabi, A.M., Albrektsson, T., Johansson, C.B. & Andersson, B. (1997) A 1-year follow-up of implants of differing surface roughness placed in rabbit bone. International Journal of Oral & Maxillofacial Implants 12: 486-494.
30. Wennerberg, A., Hallgren, C., Johansson, C.B. & Danelli, S. (1998) A histomorphometrical evaluation of screw-shaped implants, each prepared with two surface roughnesses. Clinical Oral Implants Research 9: 11-19.
31. Wennerberg, A., Ohlsson, R., Rosén, B.-G. & Andersson, B. (1996d) Characterizing 3D topography of engineering and biomaterial surfaces by confocal laser scanning and stylus techniques. Journal of Medical Engineering & Physics 18: 548-556.
32. Yoshitomi, T., Nakayasu, C., Hasegawa, S., Iida, A. & Okamoto, N. (1998) Site-specific lead distribution in scales of lead-administered carp (Cyprinus carpio) by non-destructive SR-XRF analysis. Chemosphere 36: 2305-2310.