Sensor needs for control and health management of intelligent aircraft engines

Proceedings of the ASME Turbo Expo 2004

Volumn 2, Issue , 2004, Pages 873-882

  Simon, Donald L ^a   Garg, Sanjay ^a   Hunter, Gary W ^a   Guo, Ten Huei ^a   Semega, Kenneth J ^b  

^a NASA GLENN RESEARCH CENTER   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CONTROL SYSTEMS; FEEDBACK CONTROL; LUBRICATION; OPTIMIZATION; RELIABILITY; ROBUSTNESS (CONTROL SYSTEMS); SENSORS;

INTELLIGENT ENGINE VISION; PROPULSION CONTROL AND HEALTH MANAGEMENT (PCHM); SELF-DIAGNOSTICS; SELF-PROGNOSTICS;

AIRCRAFT ENGINES;

EID: 10244279247     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/gt2004-54324     Document Type: Conference Paper

References (42)

1. Garg, S., 2002, "Propulsion Controls and Health Management Research at NASA Glenn Research Center," NASA TM-2002-211590.
2. National Aeronautics and Space Administration, 2003, National Aeronautics and Space Administration 2003 Strategic Plan, Washington, DC.
3. Turbine Engine Technology: A Century of Power for Flight, 2002 IHPTET/VAATE Brochure.
4. Carlin, C.M., Frisch, I., Kolden, J.J., Koncsek, J.L., Marrs, K.J., Mayer, D.W., McMahon, S.L., Milligan, K.H., Sommerfield, D.M., 2003, "Supersonic Test of the 10-Inch Bifurcated Two-Stage Supersonic Inlet (BTSSI)," NASA/CR-2003-212313.
5. Hansman, R.J., Kang, B.H., 1988, "Preliminary Definition of Pressure Sensing Requirements for Hypersonic Vehicles," Paper AIAA-88-4652-CP, AIAA/NASA/AFWAL Conference on Sensors and Measurement Techniques for Aeronautical Applications, Atlanta, GA.
6. nd AIAA/ASME/SAE Joint Propulsion Conference, Lake Buena Vista, FL.
7. Southwick, R.D., 1999, "High Stability Engine Control (HISTEC): Phase IIIB Final Report," NASA CR-1999-209315.
8. Weigl, H.J., Paduano, J.D., Fréchette, L.G., Epstein, A.H., Greitzer, E.M., Bright, M.M., Strazisar, A.J., 1998, "Active Stabilization of Rotating Stall and Surge in a Transonic Single Stage Axial Compressor," ASME Journal of Turbomachinery, 120, No. 4, pp. 625-636.
9. Simon, J.S., Valavani, L., Epstein, A.H., Greitzer, E.M., 1993, "Evaluation of Approaches to Active Compressor Surge Stabilization," ASME Journal of Turbomachinery, 115, No. 1, pp. 57-67.
10. Weigl, H.J., 1997, "Active Stabilization of Rotating Stall and Surge in a Transonic Single Stage Axial Compressor," Doctor of Philosophy Thesis at the Massachusetts Institute of Technology, Cambridge, MA.
11. Culley, D.E., Bright, M.M., Prahst, P.S., Strazisar, A.J., 2003, "Active Flow Separation Control of a Stator Vane Using Surface Injection in a Multistage Compressor Experiment," NASA/TM-2003-212356, Paper ASME GT2003-38863, Turbo Expo 2003, Atlanta, GA.
12. th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV.
13. DeLaat, J.C., Breisacher, K.J., Saus, J.R., Paxson, D.E., 2000, "Active Combustion Control for Aircraft Gas Turbine Engines," NASA/TM-2000-210346, Paper AIAA-2000-3500, 36th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Huntsville, AL.
14. DeLaat, J.C., Chang, C.T., 2003, "Active Control of High Frequency Combustion Instability in Aircraft Gas-Turbine Engines," NASA/TM-2003-212611, Paper ISABE-2003-1054, 16th International Symposium on Airbreathing Engines, Cleveland, OH.
15. Chang, C.T., DeLaat, J.C., 2004, Personal communication.
16. nd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV.
17. Melcher, K.J., Kypuros, J., 2003, "Toward a Fast-Response Active Turbine Tip Clearance Control," Paper ISABE-2003-1102 16th International Symposium on Airbreathing Engines, Cleveland, OH.
18. Lattime, S.B., Steinetz, B.M, 2002, "Turbine Clearance Control Systems: Current Practices and Future Directions," NASA TM-2002-211794.
19. Urban, L.A., 1972, "Gas Path Analysis Applied to Turbine Engine Condition Monitoring," Paper AIAA 72-1082, AIAA 8th Joint Propulsion Specialist Conference, New Orleans, LA.
20. Urban, L.A., and Volponi, A.J., 1992, "Mathematical Methods of Relative Engine Performance Diagnostics," SAE 1992 Transactions, 101, Journal of Aerospace, Technical Paper 922048.
21. Luppold, R.H., Roman, J.R., Gallops, G.W., and Kerr, L.J., 1989, "Estimating In-Flight Engine Performance Variations Using Kalman Filter Concepts," Paper AIAA-89-2584, AIAA 25th Joint Propulsion Conference, Monterey, CA.
22. Adibhatla, S., and Johnson, K.L., 1993, "Evaluation of a Nonlinear PSC Algorithm on a Variable Cycle Engine," Paper AIAA-93-2077, AIAA 29th Joint Propulsion Conference, Monterey, CA.
23. SAE AIR 4986, 1999, "Engine Electrostatic Gas Path Monitoring."
24. rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Seattle, WA.
25. Zakrajsek, J.J., 1989, "An Investigation of Gear Mesh Failure Prediction Techniques," NASA-TM-102340.
26. Sonnichsen, H.E., 2000, "Real-time Detection of Developing Cracks in Jet Engine Rotors," Proc. 2000 IEEE Aerospace Conference, Big Sky, MT, 6, pp. 173-184.
27. Haase, W.C., Drumm, M.J., 2002, "Detection, Discrimination and Real-Time Tracking of Cracks in Rotating Disks," Proc. of SPIE - The International Society for Optical Engineering, 4704, pp. 139-149.
28. SAE AIR 1828, 1983, "A Guide to Gas Turbine Engine Oil System Monitoring."
29. Taylor, B., 1999, "Real-Time Monitoring of Bearing Condition," Paper ASME 99-GT-307, International Gas Turbine & Aeroengine Congress & Exhibition, Indianapolis, IN.
30. Miller, J.L., Kitaljevich, D., 2000, "In-Line Oil Debris Monitor for Aircraft Engine Condition Assessment," Proc. 2000 IEEE Aerospace Conference, Big Sky, MT, 6, pp. 18-25.
31. Powrie, H., 1999, "Use of Electrostatic Technology for Aero Engine Oil System Monitoring," Proc. 1999 IEEE Aerospace Conference, Aspen, CO., 3, pp. 11-20.
32. Wright, R.L., Pearce, J.A., 2001 "Sensor Technology Improves Jet Engine Reliability," AFRL Technology Horizons, page 23.
33. Von Flotow, A., Mercadal, M., Tappert, P., 2000, "Health Monitoring and Prognostics of Blades and Disks with Blade Tip Sensors," Proc. 2000 IEEE Aerospace Conference, Big Sky, MT, 6, pp. 433-440.
34. Dowell, M., Sylvester, G., 1999, "Turbomachinery Prognostics and Health Management via Eddy Current Sensing: Current Developments," Proc. 1999 IEEE Aerospace Conference, Aspen, CO., 3, pp. 1-9.
35. Roeseler, C., von Flotow, A., Tappert, P., 2002, "Monitoring Blade Passage in Turbomachinery Through the Engine Case (No Holes)," Proc. 2002 IEEE Aerospace Conference, Big Sky, MT., 6, pp. 6-3125 -6-3129.
36. Drurnm, M., Haase, W.C., 2000, "High Performance Rotor Health Monitoring," Proc. of the 19th Digital Avionics Systems Conferences (DASC), Philadelphia, PA, 2, pp. 6E4/1 -6E4/8.
37. Engel, S.J., Gilmartin, B.J., Bongort, K., Hess, A., 2000, "Prognostics, the Real Issues Involved With Predicting Life Remaining," Proc. 2000 IEEE Aerospace Conference, Big Sky, MT, 6, pp. 457-469.
38. SAE AIR 1872, 1998, "Guide to Life Usage Monitoring and Parts Management for Aircraft Gas Turbine Engines."
39. Guo, T.H., Chen, P., 2003, "Sensor Based Engine Life Calculation - A Probabilistic Perspective," NASA/TM-2003-212499, Paper ISABE-2003-1147, 16th International Symposium on Airbreathing Engines, Cleveland, OH.
40. Baaklini, G.Y., Smith, K., Raulerson, D., Gyekenyesi, A.L., Sawicki, J.T., Brasche, L., 2002, "Tools for Engine Diagnostics Under the NASA Aviation Safety Program," Materials Evaluation, 60, No. 7, pp. 878-883.
41. Lewis, T.J., 1996, "Distributed Architectures for Advanced Engine Control Systems," Wright Laboratories, Wright-Patterson AFB, OH USA.
42. Hunter, G.W., 2003, "Morphing, Self-Repairing Engines: A Vision for the Intelligent Engine of the Future," Paper AIAA 2003-3045, AIAA/ICAS International Ah- and Space Symposium and Exposition: The Next 100 Years, Dayton, OH.