Development of microstructure in FCC metals during cold work

Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences

Volumn 357, Issue 1756, 1999, Pages 1447-1469

  Hansen, Niels ^a   Jensen, Dorte Juul ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

Author keywords

Flow stress anisotropy; Grain subdivision; Low energy structure; Orientation microstructure relationship; Scaling hypothesis; Slip pattern analysis

Indexed keywords

EID: 0348229406     PISSN: 1364503X     EISSN: None     Source Type: Journal    
DOI: 10.1098/rsta.1999.0384     Document Type: Article

References (83)

1. Argon, A. S. & Haasen, P. 1993 A new mechanism of work hardening in the late stages of large strain plastic flow in FCC and diamond cubic crystals. Acta Metall. Mater. 41, 3289-3306.
2. Armstrong, P. E., Hockett, J. E. & Sherby, O. D. 1982 Large strain multidirectional deformation of 1100 aluminium at 300 K. J. Mech. Phys. Solid 30, 37-58.
3. Ashby, M. F. 1970 The deformation of plastically non-homogeneous materials. Phil. Mag 21, 399-424.
4. Barlow, C. Y., Bay, B. & Hansen, N. 1985 A comparative investigation of surface relief structures and dislocation microstructures in cold-rolled aluminium. Phil. Mag A 51, 253-275.
5. Barrett, C. S. & Levenson, L. H. 1940 The structure of aluminium after compression. Trans. AIM 137, 112-127.
6. Basson, F. & Driver, J. H. 1998 The evolution of geometrically necessary boundaries under multiple slip conditions. In Proc. 19th Risø Int. Symp. on Materials Science (ed. J. V. Carstensen, T. Leffers, T. Lorentzen, O. B. Pedersen, B. F. Sørensen & G. Winther), pp. 213-218. Roskilde: Risø National Laboratory.
7. Bay, B., Hansen, N. & Kuhlmann-Wilsdorf, D. 1989 Deformation structures in lightly rolled pure aluminium. Mater. Sci. Engng A 113, 385-397.
8. Bay, B., Hansen, N., Hughes, D. A. & Kuhlmann-Wilsdorf, D. 1992 Evolution of FCC deformation structures in polyslip. Acta Metall. Mater. 40, 205-219.
9. Beaudoin, A. J., Mecking, H. &: Kocks, U. F. 1996 Development of localized orientation gradients in FCC polycrystals. Phil. Mag 73, 1503-1517.
10. Becker, R. & Panchanadeesvaran, S. 1995 Effects of grain interactions on deformation and local texture in polycrystals. Acta Metall. Mater. 43, 2701-2719.
11. Becker, R., Butler, J. F., Hu, H. & Lalli, L. A. 1991 Analysis of an aluminium single crystal with unstable initial orientation (001)[110] in channel die compression. Metall. Trans. A 22, 45-58.
12. Chin, G. Y. 1973 The role of preformed orientations in plastic deformation. In The inhomogeneity of plastic deformation, pp. 83-112. Metals Park, OH: American Society for Metals.
13. Christoffersen, H. & Leffers, T. 1998 The orientation of dislocation walls in rolled copper relative to the sample coordinate system. Acta Mater. 46, 4093-4102.
14. Cottrell, A. H. 1953 Dislocations and plastic flow in crystal, pp. 162-168. Oxford: Clarendon.
15. Cottrell, A. H. 1963 The mechanical properties of matter, pp. 277-278. London: John Wiley.
16. Dawson, P. R. & Beaudoin, A. J. 1998 Finite element modelling of heterogeneous plasticity. In Texture and anisotropy (ed. U. F. Kocks, C. N. Tomé & H.-R. Wenk), pp. 512-531. Cambridge University Press.
17. Dillamore, I. L., Morris, P. L., Smith, C. J. E. & Hutchinson, W. B. 1972 Transition bands and recrystallization in metals. Proc. R. Soc. Lond. A 329, 405-420.
18. Doherty, R. 1980 Nucleation and recrystallization in single phase and dispersion hardened polycrystalline materials. In Proc. 1st Risø Int. Symp. on Metallurgy and Materials Science (ed. N. Hansen, A. R. Jones & T. Leffers), pp. 57-70. Roskilde: Risø National Laboratory.
19. Driver, J. H., Juul Jensen, D. & Hansen, N. 1994 Large deformation structures in aluminium crystals with rolling texture orientations. Acta Metall. Mater. 42, 3105-3114.
20. Duly, D., Baxter, G. J., Shercliff, H. R. Whiteman, J. A., Sellars, C. M. & Ashby, M. F. 1996 Microstructure and local crystallographic evolution in an A1-1wt%Mg alloy deformed at intermediate temperature and high strain rate. Acta Mater. 44, 2947-2962.
21. Frank, F. C. 1950 In Report on a symposium on plastic deformation of crystalline solids, pp. 150-154. Washington, DC: Carnegie Institute of Technology and Office of Naval Research, US Government Printing Office.
22. Gasperini, M., Pinna, C. & Swiatnicki, W. 1996 Microstructure evolution and strain localization during shear deformation of an aluminium alloy. Acta Mater. 44, 4195-4208.
23. Gil Sevillano, J., van Houtte, P. & Aernoudt, E. 1981 Large strain work hardening and textures. Prog. Mat. Sci 25, 69-412.
24. Godfrey, A. & Hughes, D. A. 1998 Characterization of dislocation wall spacing distribution. In Solidification (ed. S. P. Marsh, J. A. Dantzig, W. Hofmeister, R. Trivedi, M. G. Chu, E. J. Lavernia & J. H. Chun), pp. 191-199.
25. Godfrey, A., Juul Jensen, D. & Hansen, N. 1998a Slip pattern, microstructure and local crystallography in an aluminium crystal of brass orientation {110}〈112〈. Acta Mater. 46, 823-833.
26. Godfrey, A., Juul Jensen, D. & Hansen, N. 1998a Slip pattern, microstructure and local crystallography in an aluminium single crystal of copper orientation {112}〈111〉. Acta Mater. 46, 835-848.
27. Hansen, N. 1990 Cold deformed microstructures. Mater. Sci. Technol. 6, 1039-1047.
28. Hansen, N. & Huang, X. 1998 Microstructure and flow stress of polycrystals and single crystals. Acta Mater. 46, 1827-1836.
29. Hansen, N. & Hughes, D. A. 1995 Analysis at large dislocation populations in deformed metals. Physica Status Solidi B 149, 155-172.
30. Harris, C., Roberts, S. M., Prangnell, P. B. & Humphreys, F. J. 1996 Finite element modelling of ECA extrusion of aluminium and the study of its annealing behaviour at very high levels of plastic strain. In Recrystallization 96, Monterey, CA, pp. 587-594.
31. Hu, H. 1963 Annealing of silicon-iron single crystals. In Recovery and recrystallization of metals (ed. L. Himmel), pp. 311-378. New York: Interscience.
32. Huang, X. 1998 Grain orientation effect on the microstructure in tensile strained copper. Scr. Mater. 38, 1697-1703.
33. Huang, X. & Hansen, N. 1997 Grain orientation dependency of microstructure of aluminium deformed in tension. Scr. Mater. 37, 1-7.
34. Huang, X., Liu, Q. & Hansen, N. 1998 Grain subdivision on different length scales during plastic deformation. In Proc. 19th Risø Int. Symp. on Materials Science (ed. J. V. Carstensen, T. Leffers, T. Lorentzen, O. B. Pedersen, B. F. Sørensen & G. Winther), pp. 299-306. Roskilde: Risø National Laboratory.
35. Hughes, D. A. 1993 Microstructural evolution in a non cell forming metal: A1-Mg. Acta Metall. Mater. 41, 1421-1430.
36. Hughes, D. A. 1995 Evolution of deformation microstructure and local orientations. In Proc. 16th Risø Int. Symp. on Materials Science (ed. N. Hansen, D. Juul Jensen, Y. L. Liu & B. Ralph), pp. 63-85. Roskilde: Risø National Laboratory.
37. Hughes, D. A. & Godfrey, A. 1998 Dislocation structures formed during hot and cold working. In Proc. Hot Deformation of Aluminium Alloys II (ed. T. R. Bieler, L. A. Lalli & S. R. MacEwen), pp. 23-36. Warrendale, PA: The Metals and Materials Society.
38. Hughes, D. A. & Hansen, N. 1993 Microstructural evolution in nickel during rolling to large strains. Metall. Trans. A 24, 2021-2037.
39. Hughes, D. A. & Hansen, N. 1997 High angle boundaries formed by grain subdivision mechanisms. Acta Mater. 45, 3871-3886.
40. Hughes, D. A., Liu, Q., Chrzan, D. C. & Hansen, N. 1997 Scaling of microstructural parameters: misorientation of deformation induced boundaries. Acta Mater. 45, 105-112.
41. Hull, D. 1975 Introduction to dislocations. Oxford: Pergamon.
42. Humphreys, F. J. & Hatherly, M. 1995 Recrystallization and related annealing phenomena. Oxford: Pergamon.
43. Jago, R. A. & Hansen, N. 1986 Grain size effects in the deformation of polycrystalline iron. Acta Metall. 34, 1711-1720.
44. Juul Jensen, D. 1995a Growth rates and misorientation relationships between growing nuclei/ grains and the surrounding deformed matrix during recrystallization. Acta Metall. Mater. 43, 4117-4129.
45. Juul Jensen, D. 1995b Effects of orientation on growth during recrystallization. In Proc. 16th Risø Int. Symp. on Materials Science (ed. N. Hansen, D. Juul Jensen, Y. L. Liu & B. Ralph), pp. 119-137. Roskilde: Risø National Laboratory.
46. Juul Jensen, D. 1997 Effects of orientation correlations on misorientation distributions in cold deformed aluminium. Mat. Sci. Engng A 234-236, 762-765.
47. Juul Jensen, D., Lyttle, M. T. & Hansen, N. 1998 Hot and cold deformed aluminium: deformation microstructure and recrystallization behaviour. In Proc. Hot deformation of aluminium alloys II (ed. T. R. Bieler, L. A. Lalli & S. R. MacEwen), pp. 9-21. Warrendale, PA: The Metals and Materials Society.
48. Kocks, U. F. & Canova, G. R. 1981 How many slip systems and which? In Proc. 2nd Risø Int. Symp. on Metallurgy and Materials Science (ed. N. Hansen, A. Horsewell, T. Leffers & H. Lilholt), pp. 35-44. Roskilde: Risø National Laboratory.
49. Kuhlmann-Wilsdorf, D. 1989 Theory of plastic deformation: properties of low energy dislocation structures. Mater. Sci. Engng A 113, 1-41.
50. Kuhlmann-Wilsdorf, D. 1995 Technological high strain deformation of 'wavy glide' metals and LEDS. Physica Status Solidi A 149, 225-241.
51. Kuhlmann-Wilsdorf, D. 1999 The theory of dislocation based crystal plasticity. Phil. Mag. A 79, 955-1008.
52. Kuhlmann-Wilsdorf, D. & Hansen, N. 1991 Geometrically necessary, incidental and subgrain boundaries. Scr. Metall. Mater. 25, 1557-1562.
53. Lee, C. S. & Duggan, B. J. 1991 A simple theory for the development of inhomogeneous rolling textures. Metall Trans. A 22, 2637-2643.
54. Lee, C. S. & Duggan, B. J. 1993 Deformation banding and copper-type rolling textures. Acta Metall. Mater. 41, 2691-2699
55. Leffers, T. 1993 Heterogeneities in plastic deformation - observations and tentative models. In Advances in engineering plasticity and its application (ed. W. B. Lee), pp. 119-128. Elsevier.
56. Liu, Q. & Hansen, N. 1995 Geometrical necessary boundaries and incidental dislocation boundaries formed during cold deformation. Scr. Metall Mater. 32, 1289-1295.
57. Liu, Q. & Hansen, N. 1998 Macroscopic and microscopic subdivision of a cold-rolled single crystal of cubic orientation. Proc. R. Soc. Lond. A 454, 1-38.
58. Liu, Q., Juul Jensen, D. & Hansen, N. 1998 Effect of grain orientation on deformation structure in cold-rolled polycrystalline aluminium. Acta Mater. 20, 1-19.
59. Malin, A. S. & Hatherly, M. 1979 Microstructures of cold-rolled copper. Met. Sci. 13, 463-472.
60. Mika, D. P. & Dawson, P. R. 1998a Effects of grain interaction on deformation in polycrystals. Mat. Sci. Engng A 257, 62-76.
61. Mika, D. P. & Dawson, P. R. 1998b Polycrystal plasticity modelling of intercrystalline boundary textures. Acta Mater. 47, 1355-1369.
62. Müller, M., Zehetbauer, M., Borbely, A. & Ungar, T. 1996 Stage IV work hardening in cell forming materials. Part I. Features of the dislocation structure determined by X-ray line broadening, Scr. Mater. 35, 1461-1466.
63. Nabarro, F. R. N. 1994 The coefficient of work hardening in stage IV. Scr. Metall. Mater. 30, 1085-1087.
64. Oscarsson, A., Hutchinson, B., Nicol, B., Bate P. & Ekström, H.-E. 1994 Misorientation distribution and the transition to continuous recrystallization in strip cast aluminium alloys. Mat. Sci. Forum 157-162, 1271-1276.
65. Pantleon, W. 1998 On the statistical origin of disorientations in dislocation structures. Acta Mater. 46, 451-456.
66. Pantleon, W. & Hansen, N. 1998 On the behaviour of low-energy dislocation boundaries during plastic deformation. In Proc. 19th Risø Int. Symp. on Materials Science (ed. J. V. Carstensen, T. Leffers, T. Lorentzen, O. B. Pedersen, B. F. Sørensen & G. Winther), pp. 405-410. Roskilde: Risø National Laboratory.
67. Rosen, G. S., Juul Jensen, D., Hughes, D. A. & Hansen, N. 1995 Microstructure and crystallography of cold rolled aluminium. Acta Metall. Mater. 43, 2563-2579.
68. Randle, V., Hansen, N. & Juul Jensen, D. 1996 The deformation behaviour of grain boundary regions in polycrystalline aluminium. Phil. Mag. A 73, 265-282.
69. Steeds, S. W. 1966 Dislocation arrangement in copper single crystals as a function of strain. Proc. R. Soc. Lond. A 292, 343-373.
70. Strauss, S., Blum, W., Maier, H. J., Ungar, T., Borbily, A. & Renner, H. 1996 Long-range internal stress in cell and subgrain structures of copper during deformation at constant stress. Acta Mater. 44, 4337-4350.
71. Swann, P. R. 1963 Dislocation arrangements in face-centered cubic metals and alloys. In Electron microscopy and strength of crystals (ed. G. Thomas & J. Washburn), pp. 131-181. New York: Interscience.
72. Taylor, G. I. 1938 Plastic strain in metals. J. Inst. Met. 62, 307-324.
73. m. Physica Status Solidi A 199, 367-378.
74. Valiev, R. Z., Korznikov, A. V. & Mulynkov, R. R. 1993 Structure and properties of ultra-fine grained materials produced by severe plastic deformation. Mater. Sci. Engng A 197, 157-164.
75. Weertman, J. 1998 Non-redundant and redundant dislocations in stress gradient fields. In Proc. 19th Risø Int. Symp. on Materials Science (ed. J. V. Carstensen, T. Leffers, T. Lorentzen, O. B. Pedersen, B. F. Sørensen & G. Winther), pp. 169-183. Roskilde: Riso National Laboratory.
76. Wert, J. A. 1998 The influence of slip patterns on crystal subdivision at various length scales. In Proc. 19th Risø Int. Symp. on Materials Science (ed. J. V. Carstensen, T. Leffers, T. Lorentzen, O. B. Pedersen, B. F. Sørensen & G. Winther), pp. 573-584. Roskilde: Risø National Laboratory.
77. Wert, J. A., Liu, Q. & Hansen, N. 1995 Dislocation boundaries and active slip systems. Acta Metall Mater. 43, 4153-4163.
78. Wert, J. A., Liu, Q. & Hansen, N. 1997 Dislocation boundary formation in a cold-rolled cube-oriented A1 single crystal. Acta Mater. 45, 2565-2576.
79. Winther, G. 1998 Deformation microstructure and yield anisotropy predicted by crystal plasticity modelling. In Proc. 19th Risø Int. Symp. on Materials Science (ed. J. V. Carstensen, T. Leffers, T. Lorentzen, O. B. Pedersen, B. F. Sørensen & G. Winther), pp. 185-199. Roskilde: Risø National Laboratory.
80. Winther, G., Juul Jensen, D. & Hansen, N. 1997 Dense dislocation walls and microbands aligned with slip planes - theoretical considerations. Acta Mater. 45, 5059-5068.
81. Wonsiewicz, B. C. & Chin, G. Y. 1970 Inhomogeneity of plastic flow in constrained deformation. Metall. Trans. 1, 57-61.
82. Wrobel, M., Dymak, S., Blicharski, M. & Gorczyca, S. 1994 Dislocation structure and texture development in rolled copper single crystals. Z. Metall. 85, 415-425.
83. Zisman, A. A. & Rybin, V. V. 1998 Microscopic stress field arising from the grain interaction in plastically deformed polycrystals. Acta Mater. 46, 457-464.