Fretting fatigue behaviour of shot-peened Ti-6Al-4V at room and elevated temperatures

Fatigue and Fracture of Engineering Materials and Structures

Volumn 26, Issue 9, 2003, Pages 767-778

  Lee, H ^a   Jin, O ^a   Mall, S ^a  

^a AIR FORCE INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Alloys; Fatigue; Fretting; Multiaxial fatigue models; Residual stress; Shot peening

Indexed keywords

CRACK INITIATION; FINITE ELEMENT METHOD; FRETTING CORROSION; RESIDUAL STRESSES; SHEAR STRESS; STRESS ANALYSIS; STRESS RELAXATION; THERMAL EFFECTS; TITANIUM ALLOYS; X RAY DIFFRACTION ANALYSIS;

FATIGUE CRACK INITIATION MODEL; FRETTING FATIGUE TEST; MODIFIED SHEAR STRESS RANGE; MULTIAXIAL FATIGUE MODELS; RESIDUAL STRESS MEASUREMENT; SHOT PEENED TITANIUM ALLOY;

FATIGUE OF MATERIALS;

EID: 0141731309     PISSN: 8756758X     EISSN: None     Source Type: Journal    
DOI: 10.1046/j.1460-2695.2003.00677.x     Document Type: Article

References (31)

1. Hoeppner, D. W., Chandrasekaran, V. and Elliot, C. B., Eds. (2000) Fretting-Fatigue: Current Technologies and Practices. ASTM STP 1367, American Society for Testing and Materials, West Conshohocken, PA.
2. Hoeppner, D. and Goss, G. (1974) A fretting-fatigue damage threshold concept. Wear 27, 61-70.
3. Waterhouse, R. B. (1992) Fretting fatigue. Int. Mater. Rev. 37, 77-97.
4. Waterhouse, R. B. (1981) Avoidance of fretting fatigue failure. In: Fretting Fatigue. Applied Science Publishers, London, pp. 221-240.
5. Leadbeater, G., Noble, B. and Waterhouse, R. B. (1984) The Fatigue of an aluminum alloy produced by fretting on shot peened surfaces. In: Proceedings of Sixth International Conference on Fracture, India. Vol. 3, pp. 2125-2132.
6. Gabel, M. K. and Bethk, J. J. (1979) Coatings for fretting prevention. Wear 46, 81-96.
7. Mutoh, Y., Satoh, T. and Tsunoda, E. (1992) Improving fretting fatigue strength at elevated temperatures by shot peening in steam turbine steel. In: Standardization of Fretting Fatigue Test Methods and Equipment. ASTM STP 1159, ASTM, Philadelphia, PA, pp. 199-209.
8. De Los Rios, E. R., Trooll, M. and Levers, A. (1999) Improving fatigue crack resistance of 2024-T351 aluminum alloy by shot peening. In: Life Extension-Aerospace Technology Opportunities. The Royal Aeronautical Society Publication. Vol. 26. pp. 1-26.
9. Namjoshi, S. A., Jain, V. K. and Mall, S. (2002) Effect of shot-peening on fretting-fatigue behavior of Ti-6Al-4V. J. Engr. Mater. Tech. 124, 222-228.
10. Stott, F. H., Lin, D. S., Wood, C. and Stevenson, C. W. (1976) The tribological behavior of nickel and nickel-chromium alloys at temperatures from 20°C to 800°C. Wear 36, 147-174.
11. Barnes, D. J., Stott, F. H. and Wood G. C. (1976) The frictional behavior of iron and iron-chromium alloys at elevated temperatures. Wear 45, 199-209.
12. Hurricks, P. L. (1974) The fretting wear of mild steel from 200° to 500°C. Wear 30, 189-212.
13. Hamdy, M. M. and Waterhouse, R. B. (1979) The fretting fatigue behavior of a nickel-based alloy (Inconel 718) at elevated temperatures. In: Proceedings of the International Conference on Wear of Materials. American Society of Mechanical Engineers, New York.
14. Hamdy, M. M. and Waterhouse, R. B. (1981) The fretting wear of Ti-6Al-4V and aged Inconel 718 at elevated temperatures. Wear 71, 237-248.
15. Hamdy, M. M. and Waterhouse, R. B. (1977) The fretting fatigue behavior of Ti-6Al-4V at temperatures up to 600°C. Wear 45, 1-8.
16. Kato Y., Takafuji, S. and Kiriyama, M. (1996) Effect of shot peening on fatigue strength of Ti-6Al-4V alloy at elevated temperatures. J. Soc. Mater. Sci. Jpn. 45, 43-47.
17. Khadhraoui, M., Cao, W., Castex, L. and Guedou, J. Y. (1997) Experimental investigation and modelling of relaxation behavior of shot peening residual stresses at high temperature for Nickel base superalloys. Mater. Sci. Tech. 13, 360-367.
18. Holzapfel, H., Schulze, V., Voehringer, O. and Macherauch, E. (1998) Residual stress relaxation in an AISI 4140 steel due to quasistatic and cyclic loading at high temperatures. Mater. Sci. Engr. A. A248, 9-18.
19. Kato, Y. and Takafuji, S. (1997) Fatigue properties of shot peened Ti-6Al-4V alloy at elevated temperatures. J. Soc. Mater. Sci. Jpn. 46, 1136-1142.
20. Mall, S., Jin, O., Yuskel, H. and Calcaterra, J. R. (2002) Investigation into fretting fatigue behavior of shot-peened Ti-6Al-4V. In:Proceedings of the Seventh National Turbine Engine High Cycle Fatigue Conference, West Palm Beach, FL.
21. Sahan, O. (2002) Fretting Fatigue Behavior of a Titanium Alloy Ti-6Al-4V at Elevated Temperature. M.S. Thesis, Air Force Institute of Technology, Dayton, OH.
22. ABAQUS Standard User's Manual. Hibbit (1995), Karlsson and Sorensen, Inc.
23. Walker, K. (1970) The effective stress ratio during crack propagation and fatigue for 2024-T3 and 7075-T6 Aluminum. In: Effects on Environment and Complex Load History on Fatigue Life. American Society for Testing and Materials, Philadelphia, PA., pp. 1-14.
24. Lykins, C. D., Mall, S. and Jain, V. K. (2000) An evaluation of parameters for predicting fretting fatigue crack initiation. Int. J. Fatigue 22, 703-716.
25. Szolwinski, M. and Farris, T. (1996) Mechanics of fretting fatigue crack formation. Wear 198, 93-107.
26. Neu, R., Pape, J. and Swalla-Michaud, D. (2000) Methodologies for linking nucleation and propagation approaches for predicting life under fretting fatigue. In: Fretting Fatigue: Current Technology and Practice. ASTM 1367. American Society for Testing and Materials, West Conshohocken, PA.
27. Fatemi, A. and Socie, D. (1988) A critical plane approach to multiaxial fatigue damage including out of phase loading. Fatigue Fract. Engng. Mater. Struct. 11, 149-165.
28. Findley, W. N. (1975) Fatigue of metals under combination of stresses. Transac. ASME 79, 1337-1348.
29. Lykins, C. D., Mall, S. and Jain, V. K. (2001) A shear stress based parameter for fretting fatigue crack initiation. Fatigue Fract. Engng. Mater. Struct. 24, 461-473.
30. Namjoshi, S., Mall, S., Jain, V. K. and Jin, O. (2002) Fretting fatigue crack initiation mechanism in Ti-6Al-4V. Fatigue Fract. Engng. Mater. Struct. 25, 955-964.
31. Lykins, C. D., Mall, S. and Jain, V. K. (2001) Combined experimental-numerical investigation of fretting fatigue crack initiation. Int. J. Fatigue 23, 703-711.