Thermal management of microelectronic equipment. Heat transfer theory, analysis methods, and design practices

Thermal Management of Microelectronic Equipment

Volumn , Issue , 2002, Pages 1-347

  Yeh, L T ^a   Chu, R C ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

COOLING SYSTEMS; ELECTRONIC EQUIPMENT MANUFACTURE; ELECTRONIC EQUIPMENT TESTING; HEAT RESISTANCE; HEAT SINKS; HEAT TRANSFER; THERMOANALYSIS;

EQUIPMENT HEAT SOURCE; THERMAL CONTROL; THERMAL PATH;

ELECTRONIC EQUIPMENT;

EID: 0141705197     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Conference Paper

References (281)

1. U.S. Air Force Avionics Integrity Program (AVIP) notes, 1989.
2. A. Bar-Cohen, A. D. Kraus, and S. F. Davidson, "Thermal Frontiers in the Design and Packaging of Microelectronic Equipment," Mech. Eng., June 1983.
3. W. F. Hilbert and F. H. Kube, "Effects on Electronic Equipment Reliability of Temperature Cycling in Equipment," Report No. EC-69-400 (Final Report), Grumman Aircraft Corp., Bethpage, NY, February 1969.
4. A. H. Mayer, "Opportunities for Thermal Optimization in Electronics Packaging," Proc. 1st Int. Electronics Packaging Soc. Conf., 1981.
5. "Thermal Design, Analysis, and Test Procedures for Airborne Electronic Equipment," MIL-STD-2218, 1987.
6. R, L. Berger, "A System Approach-Minimizing Avionics Life-Cycle Cost," SAE Technical Paper Series 831107, 13th Intersociety Conf. on Environmental Systems, San Francisco, 1983.
7. L. T. Yeh, "Future Thermal Design and Management of Electronic Equipment," in Wei-Jei Yang and Yasuo Mori, eds., Heat Transfer in High Technology and Power Engineering, Hemisphere, New York, 1987.
8. A. D. Kraus, Cooling Electronic Equipment, Prentice-Hall, Englewood Cliffs, NJ, 1965.
9. J. H. Seely and R. C. Chu, Heat Transfer in Microelectronic Equipment: A Practical Guide, Marcel Dekker, New York, 1972.
10. A. W. Scott, Cooling of Electronic Equipment, Wiley, New York, 1974.
11. D. S. Steinberg, Cooling Techniques for Electronic Equipment, Wiley, New York, 1980.
12. A. D. Kraus and A. Bar-Cohen, Thermal Analysis and Control of Electronic Equipment, Hemisphere, New York, 1983.
13. G. N. Ellison, Thermal Computation for Electronic Equipment, Van Nostrand Reinhold, New York, 1984.
14. L. T. Yeh, "Review of Heat Transfer Technologies in Electronic Equipment," J. Electronic Packaging 117, 1995.
15. M. Pecht, "Why the Traditional Reliability Prediction Models Do Not Work-Is There An Alternative?" Electronics Cooling 2(1), 1996.
16. J. B. J. Fourier, The Analytical Theory of Heat, Dover, New York, 1955.
17. R. D. Lindsted and R. J. Surty, "Steady State Junction Temperature of Semiconductor Chips," IEEE Trans. Electron Devices 19(1), 1972.
18. D. P. Kennedy, "Spreading Resistance in Cylindrical Semiconductor Devices," J. Appl. Phys. 31(8), 1960
19. M. P. Heisler, "Temperature Charts for Induction and Constant-Temperature Heating," Trans. ASME 26, 1947.
20. R. D. Zerkle and J. E. Sunderland, "The Transient Temperature Distribution in a Slab Subject to Thermal Radiation," J. Heat Transfer 87, 1965.
21. D. L. Ayers, "The Transient Temperature Distribution in a Radiating Cylinder," ASME Paper No. 67-HT-71, 1967.
22. D. L. Ayers, "Transient Cooling of a Sphere in Space," J. Heat Transfer 92, 1970.
23. B. T. F. Chung and L. T. Yeh, "Heat Conduction in Slabs with Uniform Heat Sources and Radiative Boundary Conditions," J. Spacecraft and Rockets 10, 1973.
24. B. T. F. Chung and L. T. Yeh, "Temperature Distribution in Radiating Cylinders and Spheres with Uniform Heat Generation," ASME Paper No. 73-WA/HT-2, 1973.
25. J. Stefan, "Über die Theorie der Eisbildung, insbesondere über die Eisbildung im Polarmeere," Ann. Phys. Chem. N.S. 42, 1891.
26. H. S. Carslaw and J. C. Jaeger, Conduction of Heat in Solids, Oxford University Press, London, 1947.
27. M. N. Ozisik, Boundary Value Problems of Heat Conduction, International Textbook, Scranton, PA, 1968.
28. E. M. Sparrow, S. V. Patankar, and S. Ramadhyani, "Analysis of Melting in the Presence of Natural Convection in the Melt Region," J. Heat Transfer 99, 1977.
29. E. M. Sparrow and P. Souza Mendes, "Natural Convection Heat Transfer Coefficients Measured in Experiments on Freezing," Int. J. Heat Mass Transfer 25, 1982.
30. R. C. Estes, "The Effect of Thermal Capacitance and Phase Change on Outside Plant Electronic Enclosures," IEEE Trans. Components, Hybrid and Manufacturing Technol. 5, 1992.
31. D. Pal and Y. K. Joshi, "Transient Thermal Management of an Avionics Module Using Solid-Liquid Phase Change Materials (PCMs)," 7, ASME Proc. 31st Nat. Heat Transfer Conf., ASME HTD-329, 1996.
32. A. Haji-Sheikh, J. Eftekhar, and D. Y. S. Lou, "Some Thermophysical Properties of Paraffin Wax as a Thermal Storage Medium," in P. E. Bauer and H. E. Collicott, eds., Spacecraft Thermal Control, Design, and Operations, Vol. 86 of Progress in Astronautics and Aeronautics, AIAA, New York, NY, 1983.
33. C. P. Colvin, J. C. Mulligan, and Y. G. Bryant, "Enhanced Heat Transport in Environmental Systems Using Microencapsulated Phase Change Materials," 22nd Int. Conf. on Environmental Systems, Seattle, July 13-16, 1992.
34. L. T. Yeh, "Validity of One Heat Transfer Correlation to Various Shaped Ducts via Hydraulic Diameter Concept," Proc. 4th Int. Electronics Packaging Conf., Baltimore, 1984.
35. R. K. Shah and A. L. London, "Laminar Flow Forced Convection in Ducts," Advances in Heat Transfer, Supplement 1, Academic Press, New York, 1978.
36. W. M. Kays, Convective Heat and Mass Transfer, McGraw-Hill, New York, 1966.
37. L. F. Moody, "Friction Factors for Pipe Flow," Trans. ASME 66, 1944.
38. F. Kreith, Principles of Heat Transfer, International Textbook, Scranton, PA, 1965.
39. J. R. Howell, A Catalog of Radiation Configuration Factors, McGraw-Hill, New York, 1982.
40. H. C. Hottel and A. Sarofim, Radiative Transfer, McGraw-Hill, New York, 1967.
41. Research, Development, Test and Evaluation of Materials for Extreme Climatic Conditions, U.S. Army AR 70-38, 1979.
42. F. Kreith, Chapter 5, Principles of Heat Transfer, International Textbook, Scranton, PA, 1958.
43. W. C. Swinbank, "Long Wave Radiation from Clear Skies," Quar. J. Royal Meteorol. Soc. 89, 1963.
44. R. W. Bliss, "Atmospheric Radiation Near the Surface of the Ground," Solar Energy 5, 1961.
45. R. Siegel and J. R. Howell, Thermal Radiation Heat Transfer, McGraw-Hill, New York, 1972.
46. D. G. Gilmore, "Satellite Thermal Environments," Chapter II, Satellite Thermal Control, D. G. Gilmore (ed.), Aerospace Corporation Press, El Segundo, CA, 1994.
47. W. M. Rohsenow, "Nucleation with Boiling Heat Transfer," ASME paper No. 70-HT-18, 1970.
48. J. H. Seely and R. C. Chu, Heat Transfer in Microelectronic Equipment: A Practical Guide, Marcel Dekker, New York, 1972.
49. A. Bar-Cohen and T. W. Simon, "Wall Superheat Excursions in the Boiling Incipience of Dielectric Fluids," AIAA/ASME Conf. 1, 1986.
50. A. E. Bergles and W. M. Rohsenow, "The Determination of Forced Convection Surface Boiling Heat Transfer," J. Heat Transfer 86, 1964.
51. J. H. Lienhard, "Correlation of Limiting Liquid Superheat," Chem. Eng. Sciences 31, 1976.
52. W. M. Rohsenow, "A Method of Correlating Heat Transfer Data for Surface Boiling of Liquids," Trans. ASME 74, 1952.
53. W. M. Rohsenow, "Pool Boiling," in G. Hetsroni, ed., Handbook of Multiphase Systems, Hemisphere/McGraw-Hill, New York, 1982.
54. W. M. Rohsenow and P. Griffith, "Correlation of Maximum Heat Transfer Data for Boiling Saturated Liquids," Chem. Eng. Progress Symp. Ser. 52(18), 1956.
55. N. Zuber, "On the Stability of Boiling Heat Transfer," J. Heat Transfer, 80(3), 1958.
56. N. Zuber, "Hydrodynamic Aspects of Boiling Heat Transfer," U.S. AEC Report AEC-4439, 1959 (doctoral dissertation, University of California at Los Angeles, 1959).
57. S. S. Kutateladze, "Heat Transfer in Condensation and Boiling," U.S. AEC Report AEC-TR-3770, 1952.
58. Y.P. Chang and N. W. Synder, "Heat Transfer Saturated Boiling," Chem. Eng. Progress Symp. Ser. 56(30), 1960.
59. N. Zuber, M. Tribus, and J. W. Westwater, "The Hydrodynamic Crisis in Pool Boiling of Saturated and Subcooled Liquids," Int. Dev. Heat Transfer, Part II, ASME, New York, 1961.
60. Y. P. Chang, "Some Possible Critical Conditions in Nucleate Boiling," J. Heat Transfer 86, 1964.
61. J. D. Seader et al., "Boiling Heat Transfer for Cryogenics," NASA CR-243, 1965.
62. K. H. Sun and J. H. Lienhard, "The Peak Pool Boiling Heat Flux on Horizontal Cylinders," Int. J. Heat and Mass Transfer 10, 1970.
63. J. H. Lienhard and V. K. Dhir, "Hydrodynamic Prediction of Peak Pool Boiling Heat Fluxes from Finite Bodies," J. Heat Transfer 95, 1973.
64. J. H. Lienhard, V. K. Dhir, and D. M. Ricerd, "Peak Pool Boiling Heat Flux Measurements on Finite Horizontal Flat Plate," J. Heat Transfer 95, 1973.
65. A. E. Bergles, "Burnout in Boiling Heat Transfer, Part 1: Pool Boiling Systems," Nuclear Safety 16, 1975.
66. P. J. Berenson, "Transition Boiling Heat Transfer from a Horizontal Surface," J. Heat Transfer 83, 1961.
67. J. H. Lienhard and P. T. Y. Wong, "The Dominant Instable Wavelength and Minimum Heat Flux during Film Boiling on a horizontal Cylinder," J. Heat Transfer 86, 1964.
68. S. A. Kovalev, "An Investigation of Minimum Heat Fluxes in Boiling of Water," Int. J. Heat and Mass Transfer 9, 1966.
69. C. A. Bromley, "Heat Transfer in Stable Film Boiling," Chem. Eng. Progress Symp. Ser. 46(5), 1950.
70. B. P. Breen and J. W. Westwater, "Effect of Diameter of Horizontal Tubes on Film Boiling Heat Transfer," Chem. Eng. Progress Symp. Ser. 58(7), 1962.
71. M. T. Cichelli and C. F. Bonilla, Trans. AIChE 41, 1945.
72. A. E. Bergles and W. M. Rohsenow, "The Determination of Forced-Convection Surface-Boiling Heat Transfer," J. Heat Transfer 86, 1964.
73. E. E. Duke and V. E. Shrock, "Void Volume, Site Density, and Bubble Size for Subcooled Nucleate Pool Boiling," Proc. Heat Transfer and Fluid Mech. Inst., Stanford University Press, Palo Alto, CA, 1961.
74. H. J. Ivey, "Acceleration and the Critical Heat Flux in Pool Boiling Heat Transfer," Chartered Mechanical Engineer 9, 1962.
75. A. B. Ponter and C. P. Haigh, "The Boiling Crisis in Saturated and Subcooled Pool Boiling at Reduced Pressures," Int. J. Heat and Mass Transfer 12, 1969.
76. W. H. McAdams, W. E. Kennel, C. S. Minden, C. Rudolf, and J. E. Dow, "Heat Transfer at High Rates to Water with Surface Boiling," Ind. Eng. Chem. 41, 1959.
77. M. Jakob and W. Fritz, "Versuche über den Verdampfungsvorgang," Forsch. Gebiete Ing. 2, 1931.
78. R. L. Hummel, "Means for Increasing the Heat Transfer Coefficient between a Wall and Boiling Liquid," U.S. Patent No. 3,207,209, 1962.
79. A. E. Bergles, N. Bakhru, and J. W. Shires, Jr., "Cooling of High-Power-Density Computer Components," Report No. DSR 70712-60, Mechanical Engineering Department, Massachusetts Institute of Technology, Cambridge, 1968.
80. L. Bernath, "Prediction of Heat Transfer Burnout," Heat Transfer Symp., AIChE National Meeting, Louisville, KY, 1955.
81. L. Bernath, "Theory of Local Boiling Burnout and Its Application to Existing Data," Chem. Eng. Progress Symp. Ser. 56(30), 1960.
82. C. C. Pitts and G. Lappert, Int. J. Heat and Mass Transfer 9, 1966.
83. F. S. Pramuk and J. W. Westwater, "Effect of Agitation on the Critical Temperature Difference for a Boiling Liquid," Chem. Eng. Progress Symp. Ser. 53(18), 1956.
84. R. Siegel, "Effects of Reduced Gravity on Heat Transfer," in J. P. Hartnett and T. F. Irvine, Jr., eds., Advances in Heat Transfer, Vol. 4, Academic Press, New York, 1967.
85. R. Siegel and C. Vsiskin, "A Photographic Study of Boiling in the Absence of Gravity," J. Heat Transfer 81, 1959.
86. C. Vsiskin and R. Siegel, "An Experimental Study of Boiling in Reduced and Zero Gravity Fields," J. Heat Transfer 83, 1961.
87. H. Merte, Jr., and J. A. Clark, "Boiling Heat Transfer with Cryogenic Fluids at Standard, Fractional, and Near-Zero Gravity," J. Heat Transfer 86, 1964.
88. C. M. Usiskin and R. Siegel, "An Experimental Study of Boiling in Reduced and Zero Gravity Fields," J. Heat Transfer 83, 1961.
89. J. E. Sherley, "Nucleate Boiling Heat Transfer Data for Liquid Hydrogen at Standard and Zero Gravity," Advances in Cryogenic Engineering, K. D. Timmerhaus, (ed.), Vol. 8, Plenum, New York, 1963.
90. R. G. Clodfelter, "Low Gravity Pool-Boiling Heat Transfer," APL-TDR64-19 (DDC No. AD-437803), 1964.
91. R. Siegel and J. R. Howell, "Critical Heat Flux for Saturated Pool Boiling from Horizontal and Vertical Wires in Reduced Gravity," NASA Tech. Note TND-3123, 1965.
92. Y. Y. Hsu and J. W. Westwater, "Approximate Theory for Film Boiling on Vertical Surfaces," Chem. Eng. Progress Symp. Ser. 56, 1960.
93. A. E. Bergles, J. G. Collier, J. M. Delhaye, G. F. Hewitt, and F. Mayinger, Two-Phase Flow and Heat Transfer in the Power and Process Industries, Hemisphere, New York, 1981.
94. W. Frost, Heat Transfer at Low Temperature, Plenum, New York, 1975.
95. W. M. Rohsenow, J. P. Hartnett, and E. N. Ganic, Chapter 12, Fundamental Handbook of Heat Transfer, 2nd ed., McGraw-Hill, New York, 1985.
96. A. D. Kraus and A. Bar-Cohen, Thermal Analysis and Control of Electronic Equipment, Hemisphere, New York, 1983.
97. A. E. Bergles, J. G. Collier, J. M. Delhaye, G. F. Hewitt, and F. Mayinger, Two-Phase Flow and Heat Transfer in the Power and Process Industries, Hemisphere, Washington, 1981.
98. E. J. Davis and G. H. Anderson, "The Incipience of Nucleate Boiling in Forced Convection Flow," AIChE J. 12(4), 1966.
99. W. H. Jens and P. A. Lottes, "Analysis of Heat Transfer Burnout, Pressure Drop, and Density Data for High Pressure Water," USAFC Report ANL-4627, U. S. Atomic Energy Commission, 1951.
100. J. R. S. Thom, W. M. Walker, T. A. Fallon, and G. F. S. Reising, "Boiling in Subcooled Water during Flow up Heated Tubes or Annuli," presented at the Symposium on Boiling Heat Transfer in Steam Generating Units and Heat Exchangers, Manchester, Institute of Mechanical Engineers (London), Paper No. 6, September 15-16, 1965.
101. J. C. Chen, "Correlation for Boiling Heat Transfer to Saturated Liquids in Convective Flow," ASME Paper No. 63-HT-34, 1963.
102. 2," AEEW-R789, United Kingdom Atomic Energy Authority, 1972.
103. S. Y. Ahmad, "Flow to Fluid Modeling of Critical Heat Flux: A Compensated Distortion Model," Int. J. Heat Mass Transfer, 1973.
104. D. C. Groeneveld, "Post Dryout Heat Transfer at Reactor Operating Conditions," AECL-4513, ANS Meeting on Water Reactor Safety, Salt Lake City, UT, 1973.
105. W. Wiener, "Latest Developments in Natural Circulation Boiler Design," presented to American Power Conference, Chicago, April 18-20, 1977.
106. L. Friedel, "Improved Friction Pressure Drop Correlations for Horizontal and Vertical Two Phase Flow," presented to European Two Phase Group Meeting, Ispra, Italy, 1979.
107. W. Nusselt, "Die Oberflachenkondensation des Wasserdampfes," Zeitschr. Ver. Deutsch. Ing. 60, 1916.
108. M. Jakob, Heat Transfer, Vol. 1, Wiley, New York, 1949.
109. D. Q. Kern, "Mathematical Development of the Tube Loading in Horizontal Condensers," AIChE J. 4, 1958.
110. I. G. Shekriladz and V. I. Gomelauri, "Theoretical Study of Laminar Film Condensation of Flowing Vapor," Int. J. Heat Mass Transfer 9, 1966.
111. K. O. Beatty and D. L. Katz, "Condensation of Vapors on Outside of Finned Tubes," Chem. Eng. Prog. 44, 1948.
112. W. H. McAdams, Heat Transmission, 3rd ed., McGraw-Hill, New York, 1954.
113. W. J. Minkowycz and E. M. Sparrow, "Condensation Heat Transfer in the Presence of Non-Condensable, Interfacial Resistance, Superheating, Variable Properties and Diffusion," Int. J. Heat Mass Transfer 9, 1966.
114. W. M. Rohsenow, "Heat Transfer and Temperature Distribution in Laminar Film Condensation," Trans. ASME 78, 1956.
115. A. P. Colburn, "The Calculation of Condensation Where a Portion of the Condensate Layer Is in Turbulent Motion," Trans. AIChE 30, 1933.
116. E. F. Carpenter and A. P. Colburn, "The Effects of Vapor Velocity on Condensation inside Tubes," Inst. Mech. Eng., ASME Proc. General Discussion on Heat Transfer, 1951.
117. O. Baker, "Simultaneous Flow of Oil and Gas," Oil Gas J. 53, 1954.
118. P. B. Whalley, Boiling, Condensation, and Gas-Liquid Flow, Clarendon Press, Oxford, 1987.
119. E. P. Ananiev, L. D. Boyko, and G. N. Krushilin, "Heat Transfer in the Presence of Steam Condensation in Horizontal Tubes-Part II," Paper 34, Int. Heat Transfer Conf., Boulder, CO, 1961.
120. W. M. Rohsenow and J. P. Hartness, Chapter 11, Fundamental Handbook of Heat Transfer, McGraw-Hill, New York, 1973.
121. F. Kreith, Chapter 2, Principles of Heat Transfer, International Textbooks, Scranton, PA, 1963.
122. J. H. Seely and R. C. Chu Chapter III, Heat Transfer in Microelectronic Equipment: A Practical Guide, Marcel Dekker, New York, 1972.
123. M. M. Yovanovich, "Thermal Contact Resistance in Microelectronics," National Electronic Packaging and Production Conference (NEPCON), Anaheim, CA., 1978.
124. M. M. Yovanovich, "Thermal Contact Correlations," Spacecraft Radiative Transfer and Temperature Control 83, Progress in Astronautics and Aeronautics, 1982.
125. M. M. Yovanovich, A. H. Hegazy, and J. DeVaal, "Surface Hardness Distribution Effects upon Contact, Gap and Joint Conductances," AIAA-82-0887, 1982.
126. M. M. Yovanovich and A. H. Hegazy, "Experimental Verification of Contact Conductance Models Based upon Distributed Surface Micro-Hardness," AIAA-83-0532, 1983.
127. M. G. Cooper, B. B. Mikic, and M. M. Yovanovich, "Thermal Contact Resistance," Int. J. Heat Mass Transfer 12, 1969.
128. C. L. Tien, "A Correlation for Thermal Contact Conductance of Nominally Flat Surfaces in a Vacuum," Proc. 7th Conf. Thermal Conductivity, National Bureau of Standards, Gaithersburg, MD, November 1967.
129. B. Snaith, P. W. O'Callaghan, and S. D. Probert, "Use of Interstitial Materials for Thermal Contact Conductance Control," AIAA-84-0145, 1984.
130. M. M. Yovanovich, "Effect of Foils upon Joint Resistance: Evidence of Optimum Thickness," AIAA Progress in Astronautics and Aeronautics, Thermal Control and Radiation 3, 1973.
131. G. P. Peterson and L. S. Fletcher, "Thermal Contact Conductance in the Presence of Thin Metal Foils," AIAA-88-0466, 1988.
132. P. W. O'Callaghan, B. Snaith, and S. D. Probert, "Prediction of Interfacial Filler Thickness for Minimum Thermal Contact Resistance," AIAA J. 21(9), 1983.
133. V. W. Antonetti and M. M. Yovanovich, "Using Metallic Coating to Enhance Thermal Contact Conductance of Electronic Packages," Heat Transfer in Electronic Equipment, ASME-HTD, 28, 1983.
134. V. W. Antonetti and M. M. Yovanovich, "Enhancement of Thermal Contact Conductance by Metallic Coatings: Theory and Experiment," J. Heat Transfer 107, 1985.
135. V. W. Antonetti, "On the Use of Metallic Coatings to Enhance Thermal Contact Conductance," Ph.D. Thesis, University of Waterloo, 1983.
136. T. K. Kang, G. P. Peterson, and L. S. Fletcher, "Effect of Metallic Coatings on the Thermal Contact Conductance of Turned Surfaces," ASME Paper No. 89-HT-18, 1989.
137. R. S. Cook, K. H. Token, and R. L. Calkins, "A Novel Concept for Reducing Thermal Contact Resistance," presented at the 3rd AIAA/ASME Joint Thermophysics, Fluid, Plasma and Heat Transfer Conference, St. Louis, June 7-11, 1982.
138. D. H. Tuckerman, "Heat Transfer Microstructures for Integrated Circuits," Ph.D. Thesis, Stanford University, 1984.
139. M. M. Yovanovich and M. Tuarze, "Experimental Evidence of Thermal Resistance at Solder Joints," J. Spacecraft and Rockets 6(7), 1969.
140. M. M. Yovanovich, "A Correlation of Minimum Thermal Resistance at Solder Joints," J. Spacecraft and Rockets 7(8), 1970.
141. G. P. Peterson and L. S. Fletcher, "Thermal Contact Resistance of Silicon Chip Bonding Materials," Proc. of the 1st International Symposium on Cooling Technology for Electronic Equipment, Hawaii, March 17-21, 1987.
142. W. E. Schwinkendorf and E. Moss, "Thermal Conductivity and Interface of Particle-Filled Silicon Resin," ASME Paper No. 84-TH-88, 1984. 1984.
143. J. E. Shigley, Mechanical Engineering Design, 3rd Edition, McGraw Hill, Inc., New York, 1977.
144. S. R. Mirmira and L. S. Fletcher, "Comparison of Effective Thermal Conductivity and Contact Conductance of Fibrous Composites," J. Thermoptics 13(2), 1998.
145. A. Bejan and A. M. Morega, "Thermal Contact Resistance between Two Flat Surfaces That Squeeze a Film of Lubricant," J. Heat Transfer 115, 1993.
146. S. K. Parihar and N. T, Wright, "Thermal Contact Resistance of Silicone Rubber to AISI 304 Contacts," J. Heat Transfer 121, 1999.
147. C. Maxfield and D. Kuk, "A Multichip Module Primer," Printed Circuit Des., June 1992.
148. F. J. Dance, "Can PWB's Meet the Surface Mount Challenge?" Part 1, Electronics, May 1983.
149. F. J. Dance, "Can PWB's Meet the Surface Mount Challenge?" Part 2, Electronics, June 1983.
150. A. J. Laderman, D. B. Osborn, R. M. Grabow, and M. C. Bury, "Parametric Study of Conduction Cooling for High Power Density Electronics," Proc. Int. Symp. Cooling Technology for Electronic Equipment, Honolulu, March 17-21, 1987.
151. B. M. Guenin, "Conduction Heat Transfer in a Printed Circuit Board," Electronic Cooling Mag. 4(2), 1998.
152. R. J. Hannemann, "Physical Technology and the Air Cooling and Interconnection Limits for Mini- and Microcomputers," Chapter 1 in A. Bar-Cohen and A. D. Kraus, eds., Advances in Thermal Modeling of Electronic Components and Systems, Vol. 2, ASME Press, New York, 1990.
153. J. W. Dally, Packaging of Electronic Systems: A Mechanical Engineering Approach, McGraw-Hill, New York, 1990.
154. E. M. Sparrow, J. E. Niethammer, and A. Chaboki, "Heat Transfer and Pressure Drop Characteristics of Arrays of Rectangular Modules Encountered in Electronic Equipment," Int. J. Heat and Mass Transfer 25(7), 1982.
155. E. M. Sparrow, A. A. Yanezmoreno, and D. R. Ottis, Jr., "Convective Heat Transfer Response to Height Differences in an Array of Blocks-Like Electronic Components," Int. J. Heat and Mass Transfer 27(3), 1984.
156. P. R. Souza Mendes and W. F. N. Santos, "Heat Transfer and Pressure Drop Experiments in Air-Cooled Electronic Component Arrays," J. Thermophysics 1(4), 1987.
157. Y. P Gan, Q. J. Peng, C. F. Ma, Z. Y. Zhou, and D. Y. Cai, "Forced Convective Air Cooled from Electronic Component Arrays in a Parallel Channel," in R. K. Shah and A. Hashemi, eds., Aerospace Heat Exchanger Technology, Elsevier Science Publishers, Amsterdam, 1993.
158. M. Wills, "Thermal Analysis of Air-Cooled PCBs" (4 parts), Electronic Production, May-August, 1983.
159. F. E. Altoz, "Thermal Management," Chapter 2 in C. A. Harper, ed., Electronic Packaging and Interconnection Handbook, McGraw-Hill, New York, 1991.
160. W. M. Kays and M. E. Crawford, Convective Heat and Mass Transfer, 2nd ed., McGraw-Hill, New York, 1980.
161. R. J. Moffat and A. Ortega, "Direct Air-Cooling of Electronic Components," in A. Bar-Cohen and A. D. Kraus, eds., Advances in Thermal Modeling of Electronic Components and Systems, Vol.1, Hemisphere, New York, 1988.
162. R. Hannemann, L. R. Fox, and M. Mahalingham, "Heat Transfer in Microelectronic Components," keynote paper, Proc. Int. Symp. Cooling Technol. Electronic Equipment, Honolulu, March 17-21, 1987.
163. K. S. Lau and R. P. Mahajan, "Effects of Tip Clearance and Fin Density on the Performance of Heat Sinks for VLSI Packages," IEEE Trans. Components, Hybrids, and Manufacturing Technol. 12(4), 1989.
164. R. S. Lee, H. C. Huang, and W. Y. Chen, "A Thermal Characteristic Study of Extruded Type Heat Sinks in Considering Air Flow Bypass Phenomenon," Proc. 6th Ann. IEEE Semiconductor Thermal and Temperature Measurement Symp., 1990.
165. C. L. Chapman, S. Lee, and B. L. Schmidt, "Thermal Performance of an Elliptical Pin Fin Heat Sink," Proc. 10th Ann. IEEE Semiconductor Thermal and Temperature Measurement Symp., 1994.
166. R. D. Blevins, Applied Fluid Dynamics Handbook, Van Nostrand Reinhold, New York, 1984.
167. A. K. Singhal, L. W. Keeton, A. K. Majumdar, T. Mukerjee, and R. S. Johnson, "An Improved Mathematical Formulation for the Computations of Flow Distributions in Manifolds for Compact Heat Exchangers," Adv. Heat Exchanger Des., ASME HTD 66, 1986.
168. W. Elenbaas, "Heat Dissipation of Parallel Plates by Convection," Physica 9(1), 1942.
169. E. M. Sparrow and P. A. Bahrami, "Experiments on Natural Convection from Vertical Parallel Plates with Either Open or Closed Edges," J. Heat Transfer 102, 1980.
170. E. K. Levy, "Optimum Plate Spacing for Laminar Natural Convection from Vertical Isothermal Flat Plates," J. Heat Transfer 93, 1971.
171. A. Bar-Cohen and W. M. Rohsenow, "Thermally Optimum Spacing of Vertical, Natural Convection Cooled Parallel Plates," J. Heat Transfer 106, 1984.
172. E. M. Sparrow and C. Prakash, "Enhancement of Natural Convection Heat Transfer by a Staggered Array of Discrete Vertical Plates," J. Heat Transfer 102, 1980.
173. E. M. Sparrow and C. Prakash, "Natural Convection Heat Transfer Performance Evaluation for Discrete- (In-Line or Staggered) and Continuous-Plate Arrays, Numerical Heat Transfer 3, 1980.
174. T. Aibara, "Natural Convective Heat Transfer in Vertical Parallel Fins of Rectangular Profiles," Jap. Soc. Mech. Eng. 34, 1968.
175. K. E. Starner and H. N. McManus, "An Experimental Investigation of Free Convection Heat Transfer from Rectangular Fin Arrays," J. Heat Transfer 85, 1963.
176. J. R. Welling and C. B. Wooldridge, "Free Convection Heat Transfer Coefficients from Rectangular Vertical Fins," J. Heat Transfer 87, 1965.
177. K. Izume and H. Nakamura, "Heat Transfer by Convection on the Heated Surface with Parallel Fins," Jap. Soc. Mech. Eng. 34, 1968.
178. D. W. Van De Pol and J. K. Tierney, "Free Convection Nusselt Number for Vertical U-Shaped Channels," J. Heat Transfer 95, 1973.
179. S. N. Rea and S. E. West, "Thermal Radiation from Finned Heat Sinks," IEEE Trans. Parts, Hybrids, and Packaging PHP-12(2), 1976.
180. F. Haharap and H. N. McManu Jr., "Natural Convection Heat Transfer from Horizontal Rectangular Fin Arrays," J. Heat Transfer 89, 1967.
181. E. M. Sparrow and S. B. Vemuri, "Natural Convection/Radiation Heat Transfer from Highly Populated Pin Fin Arrays," J. Heat Transfer 107, 1985.
182. E. M. Sparrow and S. B. Vemuri, "Orientation Effects on Natural Convection/Radiation Heat Transfer from Pin Fin Arrays," Int. J. Heat and Mass Transfer 29, 1986.
183. M. E. Alessio and D. A. Kaminski, "Natural Convection and Radiation Heat Transfer from an Array of Inclined Pin Fins," J. Heat Transfer 111, 1989.
184. M. Taylor, "Experimental Comparison of Pin Fin Configurations for Extended Surface Heat Transfer in Space Applications," Proc. 4th Int. Electronics Packaging Conf., 1984.
185. R. O. Warrington, S. Smith, R. E. Powe, and R. L. Mussulman, "Boundary Effects on Natural Convection Heat Transfer for Cylinders and Cubes," Heat Transfer in Enclosures, ASME HTD-39, 1984.
186. R. O. Warrington and R. E. Powe, "The Transfer of Heat by Natural Convection between Bodies and Their Enclosures," Int. J. Heat and Mass Transfer 28, 1985.
187. R. O. Warrington, R. E. Powe, and R. L. Mussulman, "Steady Conduction in Three Dimensional Shells," J. Heat Transfer 104, 1982.
188. C. H. Cheng, H. S. Kou, and W. H. Huang, "Flow Reversal and Heat Transfer of Fully Developed Mixed Convection in Vertical Channels," J. Thermophysics 4(3), 1990.
189. T. T. Hamadah and R. A. Wirtz, "Analysis of Laminar Fully Developed Mixed Convection in a Vertical Channel with Opposing Buoyancy," J. Heat Transfer 113, 1991.
190. W. M. Kays and A. L. London, Compact Heat Exchangers, 2nd ed., McGraw-Hill, New York, 1955.
191. J. H. Seely and R. C. Chu, Heat Transfer in Microelectronic Equipment: A Practical Guide, Chapter IV, Marcel Dekker, New York, 1972.
192. F. Kreith, Chapter 11, Principles of Heat Transfer, 7th ed., International Textbook, Scranton, PA, 1963.
193. A. D. Kraus and A. Bar-Cohen, Chapter 10, Thermal Analysis and Control of Electronic Equipment, Hemisphere, Washington, DC, 1983.
194. J. L. Mason, "Heat Transfer in Cross Flow," Proc. 2nd U.S. Natl. Congr. Applied Mechanics, ASME, Ann Arbor, MI, 1955.
195. A. R. Wieting, "Empirical Correlations for Heat Transfer and Flow Friction Characteristics of Rectangular Offset-Fin Plate-Fin Heat Exchangers," J. Heat Transfer, August 1975.
196. A. F. Knight, "Choice of Fluids for Cooling Electronic Equipment," Electro-Technology, June 1963.
197. D. J. Kelly, "Resistance of Materials to Hydraulic Fluids," Machine Design, January 21, 1972.
198. T. Y. Lee, J. Saylor, T. Simon, W. Tong, P. S. Wu, and A. Bar-Cohen, "Fluid Selection and Property Effects in Single- and Two-phase Immersion Cooling," Proc. Intersoc. Conf. Thermal Phenomena in Electronic Components, May 1988.
199. A. Bar-Cohen, and H. Schweitzer, "Convective Immersion of Parallel Plates," Proc. 4th Int. Electronic Packaging Conf., 1984.
200. K. A. Park and A. E. Bergles, "Natural Convection Heat Transfer Characteristics of Simulated Chips," Heat Transfer in Electronics Equipment, ASME HTD-48, 1985.
201. L. T. Yeh, "Analytical Solutions for a Counterflow Heat Exchanger with Space Dependent Wall Heat Dissipation," Heat Transfer in Electronics Equipment, ASME HTD-48, 1985.
202. L. T. Yeh and W. K. Gingrich, "Numerical Solutions for a Multiple-Channel Counterflow Heat Exchanger with Space Dependent Wall Heat Dissipations," Proc. 8th Int. Heat Transfer Conf. 6, San Francisco, 1986.
203. W. K. Gingrich, L. T. Yeh, and T. D. Fuhr, "Transient Temperature Distribution for a Multiple-Channel Counterflow Heat Exchanger with Space Dependent Wall Heat Dissipations," ASME Winter Annual Meeting, San Francisco, 1989.
204. L. T. Yeh, "Thermal Design of a Multiple-Channel Bidirectional Flow Cold Plate for Solid State Phased Array Radars," in W. Aung, ed., Cooling Technology for Electronic Equipment, Hemisphere, New York, 1988.
205. F. P. Incropera, J. S. Kerby, D. F. Moffat, and S. Ramadhyani, "Convection Heat Transfer from Discrete Heat Sources in a Rectangular Channel," Int. J. Heat and Mass Transfer 29, 1986.
206. K. R. Samant and T. W. Simon, "Heat Transfer from a Small High-Heat Flux Patch to a Subcooled Turbulent Flow," Proc. AIAA/ASME Heat Transfer and Thermophysics Conf., 1986.
207. S. Ramadhyani and F. P. Incropera, "Forced Convection Cooling of Discrete Heat Sources with and without Surface Enhancement," in W. Aung, ed., Cooling Technology for Electronic Equipment, Hemisphere, New York, 1988.
208. D. E. Maddox and I. Mudawar, "Single- and Two-Phase Convection Heat Transfer from Smooth and Enhanced Microelectronic Heat Sources in a Rectangular Channel," ASME HTD-96, 1, 1988.
209. G. D. Mandruiak, V. P. Carey, and X. Xu, "An Experimental Study of Convective Boiling in a Partially Heated Horizontal Channel with Offset Strip Fin," J. Heat Transfer 110, 1988.
210. G. D. Mandruiak and V. P. Carey, "Convective Boiling in Vertical Channels with Different Offset Strip Fin Geometries," J. Heat Transfer 111, 1989.
211. L. T. Yeh, "An Experimental Study of Offset Fins in a Narrow Channel," Proc. 1st Int. Conf. Aerospace Heat Exchanger Technol., Palo Alto, CA, 1993.
212. L. M. Jiji and Z. Dagan, "Experimental Investigation of Single-Phase Multijet Impingement Cooling of an Array of Microelectronic Heat Sources," in W. Aung. ed., Cooling Technology for Electronic Equipment, Hemisphere, New York, 1988.
213. D. C. Wadsworth, and I. Mudawar, "Cooling of a Multichip Electronic Module by Means of Confined Two Dimensional Jets of Dielectric Liquid," J. Heat Transfer 112, 1990.
214. D. B. Tuckerman, "Heat Transfer Microstructures for Integrated Circuits," Doctoral Thesis, Stanford University, 1980.
215. D. B. Tuckerman and F. F. Pease, "High Performance Heat Sinking for VLSI," IEEE Electron Devices Letter EDL-2, 1981.
216. J. Harley, J. Pfahler, H. Bau, and J. Zemel, "Transport Process in Micro and Submicro Channels," ASME HTD-116, 1989.
217. X. F. Peng and G. P. Peterson, "The Effect of Thermofluid and Geometrical Parameters on Convection of Liquids through Rectangular Microchannels," Int. J. Heat Mass Transfer 38(4), 1994.
218. B. X. Wang and X. F. Peng, "Experimental Investigation on Liquid Forced Convection Heat Transfer through Microchannels," Int. J. Heat Mass Transfer 37, Suppl. 1, 1994.
219. X. F. Peng, G. P. Peterson, and B. X. Wang, "Heat Transfer Characteristics of Water Flowing through Microchannels," Experimental Heat Transfer 7, 1994.
220. X. F. Peng and B. X. Wang, "Cooling Characteristics with Microchanneled Structures," Enhanced Heat Transfer 1(4), 1994.
221. X. F. Peng, B. X. Wang, G. P. Peterson, and H. B. Ma, "Experimental Investigation of Heat Transfer in Flat Plates with Rectangular Microchannels," Int. J. Heat Mass Transfer 38(1), 1995.
222. X. F. Peng and B. X. Wang, "Forced Convection and Flow Boiling Heat Transfer for Liquid Flowing through Microchannels," Int. J. Heat Mass Transfer 36(14), 1993.
223. X. F. Peng, G. P. Peterson, and B. X. Wang, "Friction Flow Characteristics of Water Flowing in Microchannel Structures," Int. J. Heat Mass Transfer 39(12), 1996.
224. X. F. Peng and G. P. Peterson, "Convective Heat Transfer and Flow Friction for Water Flowing through Microchannels," Experimental Heat Transfer 7, 1994.
225. P. Wu and W. A. Little, "Measurement of the Heat Transfer Characteristics of Gas Flow in Fin Channel Heat Exchangers Used for Microminiature Refrigerators," Cryogenics 24, 1984.
226. S. B. Choi, R. F. Barron, and R. O. Warrington, "Fluid Flow and Heat Transfer in Microtubes," Micromechanical Sensors, Actuators, and Systems, ASME DSC-32, 1991.
227. P. J. Marto and V. J. Lepere, "Pool Boiling Heat Transfer from Enhanced Surfaces to Dielectric Fluids," J. Heat Transfer 104, 1982.
228. N. Zuber, M. Tribus, and J. W. Westwater, "The Hydrodynamic Crisis in Pool Boiling of Saturated and Subcooling Liquids," Int. Dev. Heat Transfer, Part II, ASME, 1961.
229. J. R. Saylor, A. Bar-Cohen, T. Y. Lee, T. W. Simon, W. Tong, and P. S. Wu, "Fluid Selection and Property Effects in Single- and Two-Phase Immersion Cooling," IEEE Trans. Components, Hybrids, and Mfg. Technol. 11(4), 1988.
230. J. H. Lienhard and V. K. Dhir, "Hydrodynamic Prediction of Peak Pool Boiling Heat Fluxes from Finite Bodies," J. Heat Transfer 95, 1973.
231. H. J. Ivey and D. J. Morris, "On the Relevance of the Vapor-Liquid Exchange Mechanism for Subcooled Boiling Heat Transfer at High Pressure," U.K. Rep. AEEW-R-137, 1962.
232. T. Y. Lee, T. W. Simon, and A. Bar-Cohen, "An Investigation of Short-Heating-Length Effects on Flow Boiling Critical Heat Flux in a Subcooled Turbulent Flow," Proc. Intl. Symp. on Cooling Technology for Electronic Equipment, Honolulu, HI, March 17-21, 1987.
233. R. D. Danielson, L. Tousignant, and A. Bar-Cohen, "Saturated Pool Boiling Characteristics of Commercially Available Perfluorinated Insert Liquids," ASME-JSME Thermal Eng. Joint Conf. 3, 1987.
234. W. M. Rohsenow, "A Method of Correlating Heat Transfer Data for Surface Boiling Liquids," Trans. ASME 74, 1952.
235. K. A. Park and A. E. Bergles, "Effects of Size of Simulated Microelectronic Chips on Boiling and Critical Heat Flux," J. Heat Transfer 110, 1988.
236. T. M. Anderson and I. Mudawar, "Microelectronic Cooling by Enhanced Boiling of a Dielectric Fluorocarbon Liquid," ASME HTD-96 1, 1988.
237. J. L. Chang and S. M. You, "Enhanced Boiling Heat Transfer from Micro-Porous Cylindrical Surfaces in Saturated FC-87 and R-123," J. Heat Transfer 119, 1997.
238. A. E. Bergles and C. J. Kim, "A Method to Reduce Temperature Overshoots in Immersion Cooling of Microelectronic Devices," Proc. Intersoc. Conf. Thermal Phenomena in Electronic Components, May 1988.
239. I. A. Mudawar, T. A. Incropera, and F. P. Incropera, "Microelectronic Cooling by Fluorocarbon Liquid Films," in W. Aung, ed., Proc. Intl. Symp. on Cooling Technology for Electronic Equipment, Honolulu, HI, March 17-21, 1987.
240. T. A. Grimley, I. A. Mudawar, and F. P. Incropera, "Enhancement of Boiling Heat Transfer in Falling Films," Proc. ASME-JSME Thermal Eng. Joint Conf. 3, 1987.
241. T. A. Grimley, I. A. Mudawar, and F. P. Incropera, "Limits to Critical Heat Flux Enhancement in a Liquid Film Falling over a Structured Surface That Simulates a Microelectronic Chip," J. Heat Transfer 110, 1988.
242. C. F. Ma and A. E. Bergles, "Boiling Jet Impingement Cooling of Simulated Microelectronic Chips," Heat Transfer in Electronic Equipment, ASME HTD-28, 1983.
243. K. A. Estes and I. Mudawar, "Comparison of Two-Phase Electronic Cooling Using Free Jets and Sprays," J. Electronic Packaging 117, 1995.
244. J. S. Goodling, R. C. Jaeger, N. V. Williamson, C. D. Ellis, and T. D. Slagh, "Wafer Scale Cooling Using Jet Impingement Boiling Heat Transfer," ASME Paper No. 87-WA/EEP-3, 1987.
245. S. C. Yao, "Boiling Heat Transfer for Electronic System Thermal Control," 3rd International Symposium on Transport Phenomena in Thermal Control, Taipei, 1988.
246. M. Ghodbane and J. P. Holman, "Experimental Study of Spray Cooling with Freon-113," Int. J. Heat Mass Transfer 34(4/5), 1991.
247. J. P. Holman and C. M. Kendall, "Extended Studies of Spray Cooling with Freon-113," Int. J. Heat Mass Transfer 36(8), 1993.
248. P. J. C. Normington, M. Mahalingam, and T. Y. T. Lee, "Thermal Management Control without Overshoot Using Combinations of Boiling Liquids," IEEE Trans. Components, Hybrids, and Mfg. Technol. 15(5), 1992.
249. Y. Katto, "General Features of CHF of Forced Convection Boiling in Uniformly Heated Rectangular Channels," Int. J. Heat Mass Transfer 24, 1981.
250. A. H. Iversen and S. Whitaker, "Uniform Temperature, Ultrahigh Flux Heat Sinks Using Curved Surface Subcooled Nucleation Boiling," Proc. 5th IEEE SEM-THERM Symp., 1989.
251. K. R. Samant and T. W. Simon, "Heat Transfer from a Small Heated Region to R-113 and FC-72," J. Heat Transfer 111, 1989.
252. T. Y. Lee and T. W. Simon, "Critical Heat Flux in Forced Convection Boiling from Small Regions," ASME HTD-119, 1989.
253. D. E. Maddox and I. Mudawar, "Single And Two-Phase Convective Heat Transfer from Smooth and Enhanced Microelectronic Heat Sources in a Rectangular Channel," ASME HTD-96 1, 1988.
254. X. F. Peng and B. X. Wang, "Cooling Characteristics with Microchanneled Structures," Enhanced Heat Transfer 1(4), 1994.
255. X. F. Peng and B. X. Wang, "Forced Convection and Flow Boiling Heat Transfer for Liquid Flowing through Microchannels," Int. J. Heat Mass Transfer 36(14), 1993.
256. X. F. Peng, B. X. Wang, G. P. Peterson, and H. B. Ma, "Experimental Investigation of Heat Transfer in Flat Plates with Rectangular Microchannels," Int. J Heat Mass Transfer 38(1), 1995.
257. M. B. Bowers and I. Mudawar, "High Flux Boiling in Low Flow Rate, Low Pressure Drop Mini-Channel and Micro-Channel Heat Sinks," Int. J. Heat Mass Transfer 37(2), 1994.
258. W. S. Chi, Heat Pipe Theory and Practice: A Sourcebook, McGraw-Hill, New York, 1976.
259. P. J. Marto and G. P. peterson, "Application of Heat Pipes to Electronics Cooling," in A. Bar-Cohen and A. D. Kraus, eds., Advances in Thermal Modeling of Electronic Components and Systems, Vol. 1, Helimisphere, New York, 1988.
260. K. T. Feldman, "Analysis and Design of Heat Pipes," University of New Mexico, Albuquerque, 1970.
261. P. D. Dunn and D. A. Reay, Heat Pipes, 3rd ed., Pergamon, New York, 1982.
262. A. Basiulis and M. Filler, "Operating Characteristics and Long Life Capabilities of Organic Fluid Heat Pipes," AIAA Paper 71-408, 1971.
263. A. Basiulis, R. C. Prager, and T. R. Lamp, "Compatibility and Reliability of Heat Pipe Materials," Proc. 2nd Int. Heat Pipe Conf., Bologna, Italy, 1976.
264. A. D. Kraus and A. Bar-Cohen, Thermal Analysis and Control of Electronic Equipment, Hemisphere, Washington, DC, 1983.
265. B. D. Marcus and G. L. Fleischman, "Steady State and Transient Performance of Hot Reservoir Gas Control Heat Pipes," NASA CR-73420, 1971.
266. G. A. A. Asselman and D. B. Green, "Heat Pipes," Phillips Tech. Rev. 16, 1973.
267. T. Murase, K. Yoshida, J. Fujikake, T. Koizumi, and N. Ishida, "Heat Pipe Heat Sink Heat Kicker for Cooling of Semiconductors," Furukawa Rev. 2, 1982.
268. K. S. Sekhon, "Applications of Heat Pipes to Control Electronics Temperature in Radars," IEEE Mechanical Engineering in Radar Symposium, 1977.
269. C. Feldmanis, "Cooling Techniques and Thermal Analysis of Circuit Board Mounted Electronic Equipment," Heat Transfer in Electronic Equipment, ASME HTD-20, 1982.
270. A. Basiulis, H. Tanzer, and S. McCabe, "Heat Pipes for Cooling of High Density Printed Wiring Boards," Proc. 6th Int. Heat Pipe Conf., Grenoble, France, 1987.
271. K. H. Token, E. C. Garner, R. R. Cook, and J. E. Stone, "Heat Pipe Avionic Thermal Control," AIAA-80-1511, 1980.
272. L. A. Nelson, K. S. Sekhon, and J. E. Fritz, "Direct Heat Pipe Cooling of Semiconductor Devices," Proc. 3rd Int. Heat Pipe Conf., Palo Alto, CA, 1978.
273. T. P. Cotter, "Principles and Prospects of Micro Heat Pipes," Proc. 5th Int. Heat Pipes Conf., Tsukuba, Japan, 1984.
274. G. P. Peterson, "Investigation of Miniature Heat Pipes," Final Report, Wright Patterson AFB Contract No. F33615-86-C-2733, Task 9, 1988.
275. B. R. Babin, G. P. Peterson, and D. Wu, "Analysis and Testing of a Micro Heat Pipe during Steady-State Operation," J. Heat Transfer 112, 1990.
276. D. Wu and G. P. Peterson, "Investigation of the Transient Characteristics of a Micro Heat Pipe," J. Thermophysics 5, 1991.
277. G. P. Peterson, "Overview of Micro Heat Pipe Research and Development," Appl. Mech. Rev. 45, 1992.21.
278. A. K. Mallik, G. P. Peterson, and M. H. Weichold, "On the Use of Micro Heat Pipes as an Integral Part of Semiconductors," J. Heat Transfer 114, 1992.
279. G. P. Peterson, A. B. Ducan, and M. H. Weichold, "Experimental Investigation of Micro Heat Pipes Fabricated in Silicon Wafers," J. Heat Transfer 115, 1993.
280. J. H. Seely and R. C. Chu, Chapter VIII, Heat Transfer in Microelectronic Equipment: A Practical Guide, Marcel Dekker, New York, 1972.
281. A. D. Kraus and A. Bar-Cohen, Chapter 18, Thermal Analysis and Control of Electronic Equipment, Hemisphere, Washington, DC, 1983.