Orthogonal cutting model based on finite deformation analysis. Part II: Constitutive equations and experimental verification

American Society of Mechanical Engineers, Manufacturing Engineering Division, MED

Volumn 10, Issue , 1999, Pages 301-309

  Zheng, Y ^a   Sutherland, J W ^a  

^a Michigan Technological University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; MATHEMATICAL MODELS; STATISTICAL METHODS; TOOL STEEL;

FINITE DEFORMATION THEORY; MATERIAL CONSTITUTIVE EQUATION; ORTHOGONAL CUTTING;

METAL CUTTING;

EID: 0033352053     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Article

References (34)

1. Alder, J. F., and V. A. Phillips, "The Effect of Strain Rate and Temperature on the Resistance of Aluminum, Copper, and Steel to Compression," Journal of the Institute of Metals, Vol. 83, 1954, p. 80.
2. "AMTI Model SGA/MCA Strain Gage Amplifier System," Advanced Mechanical Technology, Inc., 1989.
3. Bao, H., and M. G. Stevenson, "An Investigation of Built-up Edge Formation in The Machining of Aluminum," Int. J. Mach. Tool Des. Res., Vol. 16, 1976, pp. 165-178.
4. Chao, B. T. and G. H., Bisacre, "The Effect of Speed and Feed on Mechanics of Metal Cutting," Proc. Instn. Mech. Engrs., Vol. 165, No. 1, 1951, p. 1.
5. Cordebois, J. P. and T. Constantin, "Viscoplastic modeling of cutting in turning," Journal of Materials Processing Technology, Vol. 41, 1994, pp. 187-200.
6. Davies, E. D. H. and S. C. Hunter, J. Mech. Phys. Solids, Vol. 11, 1963, p. 155.
7. Davies, R. M., Phil. Trans., Ser. A, Vol. 2450, 1948, p. 3875.
8. Follansbee, P. S., "Matals Handbook," American Society for Metals, Metals Park, OH, Vol. 8, 1985, p. 198.
9. Goriani, V. L. and S. Kobayashi, "Strain and Strain-rate Distributions in Orthogonal Metal Cutting," General Assembly of C.I.R.P., Vol. XV, No. 4, 1966, p. 425.
10. Harding, J., "Mechanical Behavior of Composite materials Under Impact Loading," Meyers et al. (ed.), Shock-wave and High-strain-rate Phenomena in Materials, New York: Marcel Dekker, Inc., 1992, pp. 21 -34.
11. Hastings, W. F., P. L. B. Oxley and M. G. Stevenson, "Predicting a Material's Machining Characteristics Using Flow Stress Properties Obtained from High-speed Compression Tests," Proc. Instn. Mech. Engrs., Vol. 188, No.22, 1974, pp. 245-252.
12. Hopkinson, B., Phil. Trans., Ser. A, Vol. 213, 1914, p. 437.
13. Johnson, G. R., J. M. Hoegfeldt, U. S. Lindholm, and A. Nagy, "Response of Various Metals to Large Torsional Strains Over a Large Range of Strain Rates - Part 1: Ductile Metals," Trans. ASME, Journal of Engineering Materials and Technology, Vol. 105, 1983, pp. 42-47.
14. Johnson, G. R., J. M. Hoegfeldt, U. S. Lindholm, and A. Nagy, "Response of Various Metals to Large Torsional Strains Over a Large Range of Strain Rates - Part 2: Less Ductile Metals," Trans. ASME, Journal of Engineering Materials and Technology, Vol. 105, 1983, pp. 48-53.
15. Kececioglu, K., "Shear Strain Rate in Metal Cutting and its Effects on Shear Flow Stress," Trans. Am. Soc. Mech. Engrs., 1958.
16. Kolsky, H., Proc. Roy. Soc., London, 62B, 1949, p. 676.
17. Kumar, S., P. Fallbohmer and T. Altan, "Computer Simulation of Orthogonal Metal Cutting Process: Determination of Material Properties and Effects of Tool Geometry on Chip Flow," NAMRC bound volume, 1997.
18. Lee, B. Y., "Prediction of Specific Cutting Force and Cutting Force Ratio in Cutting," Journal of Materials Processing Technology, Vol. 41, 1994, pp. 71-82.
19. Merchant, M. E., "Mechanics of the Metal Cutting Process," J. Appl. Phys., Vol. 16, 1945, 267-318.
20. Meyers, M. A., L. E. Murr, and K. P. Staudhammer (ed.), Shockwave and High-strain-rate Phenomena in Materials, New York: Marcel Dekker, Inc., 1992.
21. Meyers, M. A., Dynamic Behavior of Materials, New York: John Wiley & Sons, Inc., 1994.
22. Nemat-Nasser, S., J. B. Isaacs, and J. E. Starret, "Hopkinson Techniques for Dynamic Recovery Experiments," Proc. R. Soc. London A 435, 1991, pp. 371-391.
23. Nemat-Nasser, S., "Dynamic Deformation and Failure," Meyers et al. (ed.), Shock-wave and High-strain-rate Phenomena in Materials, New York: Marcel Dekker, Inc., 1992, pp. 3-19.
24. Oxley, P. L. B. and W. F. Hastings, "Predicting the strain rate in the zone of intense shear in which the chip is formed in machining from the dynamic flow stress properties of the work material and the cutting conditions," Proc. R. Soc. Lond. Ser. A. Vol. 356, 1977, pp 395-410.
25. Samanta, S. K., "Resistance to Dynamic Compression Testing of Low Carbon Steel and Alloy Steels at Elevated Temperatures and High Strain-rates," Int. J. Mech. Sci., Vol. 10, 1968, p. 613.
26. Shaw, M. C., "A Quantized Effect of Strain Hardening as Applied to Cutting of Metal," J. Appl. Phys., Vol. 21, 1950, p. 599.
27. Spaans, C., "A Treatise on the Streamlines and the Stress, Strain, and Strain Rate Distributions, and on Stability in the Primary Shear Zone in Metal Cutting," Trans. ASME, J. Engng. Ind., Vol. 94, 1972, pp. 690-696.
28. Staskewitsch, E. and K. Stiebler, "Mechanical Behavior of a High-Strength Austenitic Steel Under Dynamic Biaxial Loading," Shock-Wave and High-Strain-Rate Phenomena in Materials, Edited by M. A. Meyers, et al., Marcel Dekker, Inc., 1992, p. 107.
29. Stevenson, M. G., and P. L. B., Oxley, "High Temperature stress/strain properties of a low carbon steel from hot machining tests," Proc. Instn. of Mech. Engrs., Vol. 187, 1973, pp. 263-272.
30. Stephenson, D. A., "Material Characterization for Metal-Cutting Force Modeling," Trans. ASME, J. of Engineering Materials and Technologies, Vol. 111, 1989, p. 210.
31. Stevenson, M. G., and P. L. B., Oxley, "An Experimental Investigation of the Influence of Strain-rate and Temperature on the Flow Stress Properties of a Low Carbon Steel Using a Machining Test," Proc. Instn. Mech. Engrs, Vol. 185, No. 55, 1970-71, pp. 741-754.
32. Stevenson, M. G., and P. L. B., Oxley, "High Temperature stress/strain properties of a low carbon steel from hot machining tests," Proc. Instn. of Mech. Engrs., Vol. 187, 1973, pp. 263-272.
33. Stevenson, M. G., and P. L. B., Oxley, "An Experimental Investigation of the Influence of Speed and Scale on the Strain-Rate in a Zone of Intense Plastic Deformation," Proc. Instn. of Mech. Engrs., Vol. 184, 1979-1980, pp. 561-569.
34. Tanaka, K., and M. Kinoshita, "Strength of Steel at High Strain Rate and at High Temperature," Bulletin of JSME, Vol. 10, No. 39, 1967, pp. 428-436.