Laser-induced incandescence for soot diagnostics at high pressures

Applied Optics

Volumn 42, Issue 12, 2003, Pages 2052-2062

  Hofmann, Max ^a   Bessler, Wolfgang G ^a   Schulz, Christof ^a   Jander, Helga ^b  

^a UNIVERSITY OF GÖTTINGEN   (Germany)

^b UNIVERSITY OF HEIDELBERG   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

HEAT TRANSFER; HIGH PRESSURE EFFECTS; LIGHT EXTINCTION; SOOT; VOLUME FRACTION;

INCANDESCENCE;

LASER OPTICS;

EID: 0042130538     PISSN: 1559128X     EISSN: 21553165     Source Type: Journal    
DOI: 10.1364/AO.42.002052     Document Type: Article

References (57)

1. T. Ni, J. A. Pinson, S. Gupta, and R. J. Santoro, “Twodimensional imaging of soot volume fraction by the use of laser-induced incandescence,” Appl. Opt. 34, 7083-7091 (1995).
2. D. J. Bryce, N. Ladommatos, and H. Zhao, “Quantitative investigation of soot distribution by laser-induced incandescence,” Appl. Opt. 39, 5012-5022 (2000).
3. C. Shaddix and K. Smyth, “Laser-induced incandescence measurements of soot production on steady and flickering methane, propane, and ethylene diffusion flames,” Combust. Flame 107, 418-452 (1996).
4. J. Appel, B. Jungfleisch, M. Marquardt, R. Suntz, and H. Bockhorn, “Assessment of soot volume fractions from laser-induced incandescence by comparison with extinction measurements in laminar, premixed, flat flames,” Proc. Combust. Inst. 26, 2387-2395 (1996).
5. R. L. Vander Wal and D. L. Dietrich, “Laser-induced incandescence applied to droplet combustion,” Appl. Opt. 34,1103-1107 (1995).
6. D. R. Snelling, G. J. Smallwood, R. A. Sawchuk, W. S. Neill, D. Gareau, D. J. Clavel, W. L. Chippior, F. Liu, and O. L. Gulder, “In-situ real-time characterization of particulate emissions from a diesel engine exhaust by laser-induced incandescence,” SAE Tech. Paper 2000-01-1994 (Society of Automotive Engineers, Warrendale, Pa., 2000).
7. S. Schraml, S. Will, and A. Leipertz, “Performance characteristics of TIRE-LII soot diagnostics in exhaust gases of Diesel engines,” SAE Tech. Paper 2000-01-2002 (Society of Automotive Engineers, Warrendale, Pa., 2000).
8. R. L. Vander Wal, T. M. Ticich, and J. R. West, Jr., “Laser-induced incandescence applied to metal nanostructures,” Appl. Opt. 38, 5867-5879 (1999).
9. B. Axelsson, R. Collin, and P.-E. Bengtsson, “Laser-induced incandescence for soot particle size measurements in premixed flat flames,” Appl. Opt. 39, 3683-3690 (2000).
10. R. L. Vander Wal, T. M. Ticich, and A. B. Stephens, “Can soot primary particle size determined using laser-induced incandescence?” Comb. Flame 116, 291-296 (1999).
11. S. Will, S. Schraml, and A. Leipertz, “Two-dimensional soot-particle sizing by time-resolved laser-induced incandescence,” Opt. Lett. 20, 2342-2344 (1995).
12. S. Will, S. Schraml, and A. Leipertz, “Comprehensive twodimensional soot diagnostics based on laser-induced incandescence,” Proc. Combust. Inst. 26, 2277-2284 (1996).
13. S. Will, S. Schraml, K. Bader, and A. Leipertz, “Performance characteristics of soot primary particle size measurements by time-resolved laser-induced incandescence,” Appl. Opt. 37, 5647-5658 (1998).
14. R. L. Vander Wal and K. J. Weiland, “Laser-induced incandescence: development and characterization towards a measurement of soot-volume fraction,” Appl. Phys. B 59, 445-452 (1994).
15. R. L. Vander Wal, “Laser-induced incandescence: detection issues,” Appl. Opt. 35, 6548-6559 (1996).
16. R. L. Vander Wal and K. A. Jensen, “Laser-induced incandescence: excitation intensity,” Appl. Opt. 37,1607-1616 (1998).
17. A. C. Eckbreth, “Effects of laser-modulated particle incandescence on Raman scattering diagnostics,” J. Appl. Phys. 48, 4473-4479 (1977).
18. L. A. Melton, “Soot diagnostics based on laser heating,” Appl. Opt. 23, 2201-2208 (1984).
19. B. Mewes and J. M. Seitzman, “Soot volume fraction and particle size measurements with laser-induced incandescence,” Appl. Opt. 36, 709-717 (1997).
20. D. L. Hofeldt, “Real-time soot concentration measurement technique for engine exhaust streams,” SAE Tech. Paper 930079 (Society of Automotive Engineers, Warrendale, Pa., 1993).
21. G. J. Smallwood, D. R. Snelling, F. Liu, and O. L. Gulder, “Clouds over soot evaporation: errors in modeling laser-induced incandescence of soot,” J. Heat Transfer 123,814-818 (2001).
22. J. E. Dec, “Soot distribution in a D.I. Diesel engine using 2-D imaging of laser-induced incandescence, elastic scattering, and flame luminosity,” SAE Tech. Paper 920115 (Society of Automotive Engineers, Warrendale, Pa., 1992).
23. J. E. Dec and C. Espey, “Ignition and early soot formation in a DI Diesel engine using multiple 2-D imaging diagnostics,” SAE Tech. Paper 950456 (Society of Automotive Engineers, War-rendale, Pa., 1995).
24. G. Wiltafsky, W. Stolz, J. Kohler, and C. Espey, “The quantification of laser-induced incandescence (LII) for planar time resolved measurements of the soot volume fraction in a combustion Diesel jet,” SAE Tech. Paper Series 961200 (Society of Automotive Engineers, Warrendale, Pa., 1996).
25. J. Pinson, D. L. Mitchell, R. J. Santoro, and T. A. Litzinger, “Quantitative, planar soot measurements in a D.I. Diesel engine using laser-induced incandescence and light scattering,” SAE Tech. Paper 932650 (Society of Automotive Engineers, Warrendale, Pa., 1993).
26. K. Inagaki, S. Takasu, and K. Nakakita, “In-cylinder quantitative soot concentration measurements by laser-induced incandescence,” SAE Tech. Paper 1999-01-0508 (Society of Automotive Engineers, Warrendale, Pa., 1999).
27. G. Bruneaux, D. Verhoeven, and T. Baritaud, “High-pressure Diesel spray and combustion visualization in a transparent model Diesel engine,” SAE Tech. Paper 1999-01-3649 (Society of Automotive Engineers, Warrendale, Pa., 1999).
28. D. Woiki, A. Giesen, and P. Roth, “Time-resolved laser-induced incandescence for soot particle sizing during acetylene pyrolysis behind shock waves,” Proc. Combust. Inst. 28, 2531-2537 (2000).
29. R. Starke and P. Roth, “Soot particle sizing by LII during shock tube pyrolysis of C6H6,” Combust. Flame 127, 2278-2285 (2002).
30. B. F. Kock, T. Eckhardt, and P. Roth, “In-cylinder sizing of Diesel particles by time-resolved laser-induced incandescence (TR-LII),” Proc. Combust. Inst. (to be published).
31. P. Roth and A. V. Filippov, “In situ ultrafine particle sizing by a combination of pulsed laser heatup and particle thermal emission,” J. Aerosol Sci. 27, 95-104 (1996).
32. N. P. Tait and D. A. Greenhalgh, “PLIF imaging of fuel fraction in practical devices and LII imaging of soot,” Ber. Bunsenges. Phys. Chem. 97, 1619-1625 (1993).
33. D. R. Snelling, F. Liu, G. J. Smallwood, and O. L. Gulder, “Evaluation of the nanoscale heat and mass transfer model of LII: prediction of the excitation intensity,” Proceedings of NHTC, presented at the 34th National Heat Transfer Conference, Pittsburgh, Pa., 20-22 August 2000, paper NHTC2000-12132.
34. D. R. Snelling, G. J. Smallwood, I. G. Campbell, J. E. Medlock, and O. L. Gulder, “Development and application of laser-induced incandescence (LII) as a diagnostic for soot particulate measurements,” presented at AGARD the 90th Symposium of the Propulsion and Energetics Panel on Advanced NonIntrusive Instrumentation for Propulsion Engines, Brussels, 20-24 October 1997.
35. R. T. Wainner, J. M. Seitzman, and S. R. Martin, “Soot measurements in a simulated engine exhaust using laser-induced incandescence,” AIAA J. 37, 738-743 (1999).
36. D. R. Snelling, G. J. Smallwood, R. A. Sawchuk, W. S. Neill, D. Gareau, D. J. Clavel, W. L. Chippior, F. Liu, O. L. Gulder, and W. D. Bachalo, “Particulate matter measurements in a Diesel engine exhaust by laser-induced incandescence and the standard gravimetric procedure,” SAE Tech. Paper 1999-01-3653 (Society of Automotive Engineers, Warrendale, Pa., 1999).
37. H. Bockhorn, B. Jungfleisch, T. Lehre, and R. Suntz, “Simultaneous assessment of particle size distributions and gas temperatures from time-resolved laser-induced incandescence,” Conference Proceedings of the European Congress of Chemical Engineering (ECCE), Nuernberg, 26-28 June 2001.
38. H. R. Leider, O. H. Krikorian, and D. A. Young, “Thermodynamic properties of carbon up to the critical point,” Carbon 11, 555-563 (1973).
39. M. Williams and S. Loyalka, Aerosol Science: Theory and Practice (Pergamon, Oxford, UK, 1991).
40. A. V. Filippov and D. E. Rosner, “Energy transfer between an aerosol particle and gas at high temperature ratios in the Knudsen transition regime,” Int. J. Heat Mass Transfer 43, 127-138 (2000).
41. M. Kerker, The Scattering of Light and Other Electromagnetic Radiation (Academic, New York, 1969).
42. K. C. Smyth and C. R. Shaddix, “The elusive history of m = 1.57-0.56i for the refractive index of soot,” Combust. Flame 107, 314-320 (1996).
43. H. Chang and T. T. Charalampopoulos, “Determination of the wavelength dependence of refractive indices of flame soot,” Proc. R. Soc. London Ser. A 430, 577-591 (1990).
44. H. Geitlinger, T. Streibel, R. Suntz, and H. Bockhorn, “Twodimensional imaging of soot volume fractions, particle number densities, and particle radii in laminar and turbulent diffusion flames,” Proc. Combust. Inst. 27, 1613-1621 (1998).
45. B. Axelsson, R. Collin, and P. E. Bengtsson, “Laser-induced incandescence for soot particle size and colume measurements using on-line extinction calibration,” Appl. Phys. B 72, 367-372 (2001).
46. R. L. Vander Wal and T. M. Ticich, “Cavity ringdown and laser-induced incandescence measurements of soot,” Appl. Opt. 38, 1444-1451 (1999).
47. R. L. Vander Wal, Z. Zhou, and M. Y. Choi, “Laser-induced incandescence calibration via gravimetric sampling,” Combust. Flame 105, 462-470 (1996).
48. D. R. Snelling, G. J. Smallwood, O. L. Gulder, and F. Liu, “A calibration independent technique of measuring soot by laser-induced incandescence using absolute light intensity,” presented at the Second Joint Meeting of the U.S. Sections of the Combustion Institute, Oakland, California, 25-28 March 2001.
49. S. Hanisch, H. Jander, T. Pape, and H. Gg. Wagner, “Soot mass growth and coagulation of soot particles in C2H4/air-flames at 15 bar,” Proc. Combust. Inst. 25, 577-584 (1994).
50. P. E. Bengtsson and M. Alden, “Soot-visualization strategies using laser techniques,” Appl. Phys. B 60, 51-59 (1995).
51. S. Schraml, S. Dankers, K. Bader, S. Will, and A. Leipertz, “Soot temperature measurements and implications for time-resolved laser-induced incandescence (TIRE-LII),” Combust. Flame 120, 439-450 (2000).
52. J. R. McDonald, A. P. Baronavski, and V. M. Donnelly, “Multiphoton-vacuum-ultraviolet laser photodissociation of acetylene: emission from electronically excited fragments,” Chem. Phys. 33, 161-170 (1978).
53. R. Reid, J. Prausnitz, and B. Poling, The Properties of Gases and Liquids (McGraw-Hill, New York, 1987).
54. H. Matzing and H. Gg. Wagner, “Measurements about the influence of pressure on carbon formation in premixed laminar C2H4-air flames,” Proc. Combust. Inst. 21, 1047-1055 (1996).
55. F. Cignoli, S. Benecchi, and G. Zizak, “Time-delayed detection of laser-induced incandescence for the two-dimensional visualization of soot in flames,” Appl. Opt. 33, 5778-5782 (1994).
56. R. L. Vander Wal, T. M. Ticich, and A. B. Stephens, “Optical and microscopy investigations of soot structure alterations by laser-induced incandescence,” Appl. Phys. B 67, 115-123 (1998).
57. P. O. Witze, S. Hochgreb, D. Kayes, H. A. Michelsen, and C. R. Shaddix, “Time-resolved laser-induced incandescence and laser elastic-scattering measurements in a propane diffusion flame,” Appl. Opt. 40, 2443-2452 (2001).