Time-resolved laser-induced incandescence and laser elastic-scattering measurements in a propane diffusion flame

Applied Optics

Volumn 40, Issue 15, 2001, Pages 2443-2452

  Witze, Peter O ^a   Hochgreb, Simone ^a   Kayes, David ^a   Michelsen, Hope A ^a   Shaddix, Christopher R ^a  

^a SANDIA NATIONAL LABORATORIES   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

IONIZATION OF GASES; LASER BEAMS; LIGHT SCATTERING; PERTURBATION TECHNIQUES; VAPORIZATION;

LASER-INDUCED INCANDESCENCE;

FLAME RESEARCH;

EID: 0000910714     PISSN: 1559128X     EISSN: 21553165     Source Type: Journal    
DOI: 10.1364/AO.40.002443     Document Type: Article

References (38)

1. R. L. Vander Wal and K. J. Weiland, “Laser-induced incandescence: Development and characterization towards a measurement of soot volume fraction,” Appl. Phys. B 59, 445-452 (1994).
2. C. R. Shaddix, J. E. Harrington, and K. C. Smyth, “Quantitative measurements of enhanced soot production in steady and flickering methane/air diffusion flames,” Combust. Flame 99, 723-732 (1994).
3. T. Ni, J. A. Pinson, S. Gupta, and R. J. Santoro, “Twodimensional imaging of soot volume fraction by the use of laser-induced incandescence,” Appl. Opt. 34, 7083-7091 (1995).
4. J. E. Dec, A. O. zur Loye, and D. L. Siebers, “Soot distribution in a D. I. Diesel engine using 2-D laser-induced incandescence imaging,” SAE paper 910224 (Society of Automotive Engineers, Warrendale, Pa., 1991).
5. Y-H. Won, T. Kamimoto, H. Kobayashi, and H. Kosaka, “2-D soot visualization in unsteady spray flame by means of laser sheet scattering technique,” SAE paper 910223 (Society of Automotive Engineers, Warrendale, Pa., 1991).
6. J. A. Pinson, D. L. Mitchell, R. J. Santoro, and T. A. Litzinger, “Quantitative, planar soot measurements in a D. I. Diesel engine using laser-induced incandescence and light scattering,” in SAE paper 932650 (Society of Automotive Engineers, Warrendale, Pa., 1993).
7. R. T. Wainner, J. M. Seitzman, and S. R. Martin, “Soot measurements in a simulated engine exhaust using laser-induced incandescence,” AIAA J. 37, 738-743 (1999).
8. D. R. Snelling, G. J. Smallwood, R. A. Sawchuk, W. S. Neill, D. Gareau, W. L. Chippior, F. Liu, and O. L. Gulder, “Particulate matter measurements in a Diesel engine exhaust by laser-induced incandescence and the standard gravimetric procedure,” in SAE paper 1999-01-3653 (Society of Automotive Engineers, Warrendale, Pa., 1999).
9. M. E. Case and D. L. Hofeldt, “Soot mass concentration measurements in Diesel engine exhaust using laser-induced incandescence,” Aerosol Sci. Technol. 25, 46-60 (1996).
10. I. Colbeck, B. Atkinson, and Y. Johar, “The morphology and optical properties of soot produced by different fuels,” J. Aerosol Sci. 28, 715-723 (1997).
11. U. O. Koylu, C. S. McEnally, D. E. Rosner, and L. D. Pfefferle, “Simultaneous measurements of soot volume fraction and particle size/microstructure in flames using a thermophoretic sampling technique,” Combust. Flame 110, 494-507 (1997).
12. R. L. Vander Wal and M. Y. Choi, “Pulsed laser heating of soot: morphological changes,” Carbon 37, 231-239 (1999).
13. R. L. Vander Wal, “Laser-induced incandescence: Detection issues,” Appl. Opt. 35, 6548-6559 (1996).
14. N. P. Tait and D. A. Greenhalgh, “PLIF imaging of fuel fraction in practical devices and LII imaging of soot,” Ber. Bunsenges. Phys. Chem. 97, 1619-1625 (1993).
15. C. R. Shaddix and K. C. Smyth, “Laser-induced incandescence measurements of soot production in steady and flickering methane, propane, and ethylene diffusion flames,” Combust. Flame 107, 418-452 (1996).
16. B. Mewes and J. M. Seitzman, “Soot volume fraction and particle size measurements with laser-induced incandescence,” Appl. Opt. 36, 709-717 (1997).
17. A. C. Eckbreth, “Effects of laser-modulated particulate incandescence on Raman scattering diagnostics,” J. Appl. Phys. 48, 4473-4479 (1977).
18. D. A. Frank-Kamenetskii, Diffusion and Heat Transfer in Chemical Kinetics (Plenum, New York, 1969), pp. 158-191.
19. S. Schraml, S. Dankers, K. Bader, S. Will, and A. Leiphertz, “Soot temperature measurements and implications for time-resolved laser-induced incandescence (TIRE-LII),” Combust. Flame 120, 439-450 (2000).
20. T. Ishiguro, N. Suzuki, Y. Fujitani, and H. Morimoto, “Microstructural changes of Diesel soot during oxidation,” Combust. Flame 85, 1-6 (1991).
21. T. Ishiguro, Y. Takatori, and K. Akihama, “Microstructure of Diesel soot particles probed by electron microscopy: first observation of inner core and outer shell,” Combust. Flame 108, 231-234 (1997).
22. A. B. Palotas, L. C. Rainey, C. J. Feldermann, A. F. Sarofim, and J. B. Vandersande, “Soot morphology: an application of image analysis in high-resolution transmission electron microscopy,” Microsc. Res. Tech. 33, 266-278 (1996).
23. H.-S. Shim, R. H. Hurt, and N. Y. C. Yang, “A methodology for analysis of 002 lattice fringe images and its application to combustion-derived carbons,” Carbon 38, 29-45 (2000).
24. B. M. Vaglieco, F. Beretta, and A. D’Alessio, “In situ evaluation of the soot refractive index in the UV-visible from the measurement of the scattering and extinction coefficients in rich flames,” Combust. Flame 79, 259-271 (1990).
25. D. R. Snelling, F. Liu, G. J. Smallwood, and ö. L. Gülder, “Evaluation of the nanoscale heat and mass transfer model of LII: prediction of the excitation intensity,” in Proceedings of the 34th National Heat Transfer Conference, Pittsburgh, Pa., 20-22 August 2000, paper NHTC2000-12132 (American Society of Mechanical Engineers, New York, 2000).
26. R. T. Wainner and J. M. Seitzman, “Soot diagnostics using laser-induced incandescence in flames and exhaust flows,” in paper AIAA-99-0640 presented at the Thirty-Fourth Aerospace Sciences Meeting and Exhibit, Reno, Nev., 11-14 January 1999 (American Institute of Aeronautics and Astronautics, New York, 1999).
27. S. C. Lee and C. L. Tien, “Optical constants of soot in hydrocarbon flames,” in 18th Symposium (International) on Combustion (Combustion Institute, Pittsburgh, Pa., 1981), pp. 1159-1166.
28. T. T. Charalampopoulos, H. Chang, and B. Stagg, “The effects of temperature and composition on the complex refractive index of flame soot,” Fuel 68, 1173-1179 (1989).
29. B. J. Stagg and T. T. Charalampopoulos, “Refractive indices of pyrolytic graphite, amorphous carbon, and flame soot in the temperature range 25 to 600 C,” Combust. Flame 94, 381-396 (1993).
30. R. J. Santoro, H. G. Semerjian, and R. A. Dobbins, “Soot particle measurements in diffusion flames,” Combust. Flame 51, 203-218 (1983).
31. R. A. Dobbins and C. M. Megaridis, “Absorption and scattering of light by polydisperse aggregates,” Appl. Opt. 30, 4747-4754 (1991).
32. T. L. Farias, U. O. Koylu, and M. G. Carvalho, “Range of validity of the Rayleigh-Debye-Gans theory for optics of fractal aggregates,” Appl. Opt. 35, 6560-6567 (1996).
33. U. O. Koylu, “Quantitative analysis of in situ optical diagnostics for inferring particle/aggregate parameters in flames: implications for soot surface growth and total emissivity,” Combust. Flame 109, 488-500 (1996).
34. U. O. Koylu, G. M. Faeth, T. L. Farias, and M. G. Carvalho, “Fractal and projected structure properties of soot aggregates,” Combust. Flame 100, 621-633 (1995).
35. J.-S. Wu, S. S. Krishnan, and G. M. Faeth, “Refractive indices at visible wavelengths of soot emitted from buoyant turbulent diffusion flames,” J. Heat Transfer 119, 230-237 (1997).
36. A. A. Lushnikov and A. E. Negin, “Aerosols in strong laser beams,” J. Aerosol Sci. 24, 707-735 (1993).
37. D. C. Smith, “Gas breakdown initiated by laser radiation interaction with aerosols and solid surfaces,” J. Appl. Phys. 48, 2217-2225 (1977).
38. R. L. Vander Wal and K. A. Jensen, “Laser-induced incandescence: excitation intensity,” Appl. Opt. 37, 1607-1616 (1998).