Accuracy and repeatability of cementless total hip replacement surgery in patients with deformed anatomies

Medical Informatics and the Internet in Medicine

Volumn 28, Issue 1, 2003, Pages 59-71

  Lattanzi, Riccardo ^a   Grazi, Erika ^a,b   Testi, Debora ^a   Viceconti, Marco ^a   Cappello, Angelo ^b   Toni, Aldo ^a  

^a RIZZOLI ORTHOPAEDIC INSTITUTE   (Italy)

^b UNIVERSITY OF BOLOGNA   (Italy)

Author keywords

Computer aided surgery; Hip prosthesis; Planned vs. Achieved accuracy; Surgical planning

Indexed keywords

BONE CEMENT;

ACCURACY; ARTICLE; CLINICAL ARTICLE; COMPUTER ASSISTED TOMOGRAPHY; COMPUTER PROGRAM; CONTROLLED STUDY; DISEASE SEVERITY; HIP DISLOCATION; HIP PROSTHESIS; HUMAN; MEDICAL ASSESSMENT; MEDICAL INFORMATION; ORTHOPEDIC SURGERY; PATHOLOGICAL ANATOMY; POSTOPERATIVE PERIOD; PREOPERATIVE EVALUATION; SURGEON; SURGICAL TECHNIQUE; TOTAL HIP PROSTHESIS; TREATMENT OUTCOME; TREATMENT PLANNING;

ANATOMY; ARTHROPLASTY, REPLACEMENT, HIP; CLINICAL COMPETENCE; HIP JOINT; HIP PROSTHESIS; HUMANS; ORTHOPEDICS; PATIENT CARE PLANNING; SURGERY, COMPUTER-ASSISTED; TOMOGRAPHY, X-RAY COMPUTED;

EID: 0038720102     PISSN: 14639238     EISSN: None     Source Type: Journal    
DOI: 10.1080/1463923031000124128     Document Type: Article

References (32)

1. Bargar, W. L., 1989, Shape the implant to the patient. A rationale for the use of custom-fit cementless total hip implants. Clinical Orthopaedics and Related Research, 249, 73-78.
2. Bongini, D., Carfagni, M. and Governi, L. 2000, Hippin: a semiautomatic computer program for selecting hip prosthesis femoral components. Computer Methods and Programs in Biomedicine, 2, 105-115, 63.
3. Bargar, W. L., Bauer, A. and Borner, M. 1998, Primary and revision total hip replacement using the Robodoc system. Clinical Orthopaedics and Related Research, 354, 82-91.
4. Blackwell, M., Simon, D., Rao, S. and DiGioia, A. M. 1996, Design and evaluation of 3-D pre-operative planning software: application to acetabular implant alignment. Robotics Institute of Carnegie Mellon University Technical paper.
5. DiGioia, A. M., Jaramaz, B., Blackwell, M., Simon, D., Morgan, F., Moody, J. E., Nikou, C., Colgan, B. D., Aston, C. A., Labarca, R. S., Kischell, E. and Kanade, T. 1998, The Otto Aufranc Award. Image guided navigation system to measure intraoperatively acetabular implant alignment. Clinical Orthopaedics and Related Research, 355, 8-22.
6. Gossé, F., Wenger, K. H., Knabe, K. and Wirth, C. J., 2000, Efficacy of robot-assisted hip stem implantation. A radiographic comparison of matched-pair femurs prepared manually and with the Robodoc system using an anatomic prosthesis. Proceedings of Medical Image Computing and Computer-Assisted Intervention, MICCAI 2000, Pittsburgh, PA. 11-14 October 2000, pp. 1180-1184.
7. Grueneis, C., Richter, R. and Henning, F. 1999, Clinical introduction of the CASPAR system: problems and initial results. Proceedings of 4th International Symposium Computer Assisted Orthopaedic Surgery, CAOS '99, Davos, Switzerland. 17-19 March 1999.
8. Jaramaz, B., Nikou, C., Simon, D. and DiGioia, A. M. 1997, Range of motion after total hip arthroplasty: experimental verification of the analytical simulator. Proceedings of First Joint CVRMed/MRCAS Conference, Grenoble. 1997, pp. 573-582.
9. Kazanzides, P., Mittlestadt, B., Musits, B., Bargar, W., Zuhars, J., Williamson, B., Cain, P. and Carbone, E. 1995, An integrated system for cementless hip replacement. IEEE Engineering in Medicine and Biology Magazine, 3, 307-313, 14.
10. O'Toole, R. V., Jaramaz, B., DiGioia, A. M., Visnic, C. D. and Reid, R. H. 1995, Biomechanics for preoperative planning and surgical simulations in orthopaedics. Computers in Biology and Medicine, 2, 183-191, 25.
11. Paul, H. A., Bargar, W. L., Mittlestadt, B., Musits, B., Taylor, R. H., Kazanzides, P., Zuhars, J., Williamson, B. and Hanson, W. 1992, Development of a surgical robot for cementless total hip arthroplasty. Clinical Orthopaedics and Related Research, 285, 57-66.
12. Paul, H. A., Mittlestadt, B., Musits, B., Taylor, R. H., Kazanzides, P., Zuhars, J., Williamson, B. and Hanson, W. 1992, A surgical robot for Total Hip Replacement surgery. Proceedings of IEEE International Conference on Robotics and Automation, Nice, France. 12-14 May 1992, pp. 606-611.
13. Petermann, J., Kober, R., Heinze, P., Frolich, J. J., Heeckt, P. F. and Gotzen, L. 2000, Computer-assisted planning and robot-assisted surgery in anterior cruciate ligament reconstruction. Operative techniques in Orthopaedics, 1, 50-55, 10.
14. Radermacher, K., Portheine, F., Anton, M., Zimolong, A., Kaspers, G., Rau, G. and Staudte, H. W. 1998, Computer assisted orthopaedic surgery with image based individual templates. Clinical Orthopaedics and Related Research, 354, 28-38.
15. Sato, Y., Sasama, T., Sugano, N., Nakahodo, K., Takashi, N., Ohzono, K., Yoneobu, K., Ochi, T. and Tamura, S. 2000, Intraoperative simulation and planning using a combined acetabular and femoral (CAF) navigation system for total hip replacement. Proceedings of Medical Image Computing and Computer-Assisted Intervention, MICCAI 2000, Pittsburgh, PA. 11-14 October 2000, pp. 1114-1125.
16. Schulte-Bockholt, D., Grützner, P. A. and Wentzensen, A. 2001, First experiences with the Stratec computer assisted navigation system in total hip replacement. Proceedings of First Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery, CAOS 2001, Davos, Switzerland. 7-10 February 2001, pp. 96.
17. Simon, D. A., O'Toole, R. V., Blackwell, M., Morgan, F., DiGioia, A. M. and Kanabe, T. 1995, Accuracy validation in image-guided orthopaedic surgery. Proceedings of Second International Symposium on Medical Robotics and Computer Assisted Surgery, MRCAS '95, Baltimore, Maryland, 5-7 November 1995, pp. 185-192.
18. Simon, D. A., Jaramaz, B., Blackwell, M., Morgan F., DiGioia, A. M., Kischell, E., Colgan, B. and Kanade, T. 1997, Development and validation of a navigational guidance system for acetabular implant placement. Proceedings of First Joint CVRMed/MRCAS Conference, Grenoble, 1997, pp. 583-592.
19. Sugano, N., Sato, Y., Sasama, T., Nakahodo, K., Yoden, S., Nishii, T., Sakai, T., Haraguti, K., Ohzono, K., Yonenobu, K., Tamura, S. and Ochi, T. 1999, Control of limb length and femoral anteversion in total hip arthroplasty using Optotrak. Computer Aided Surgery, 6, 343, 4.
20. Prymka, M., Wu, L., Koebke, J., Hahne, J. and Hassenpflug, J., 2001, Robot assisted implantation of hip endoprosthesis microradiographical results. Proceedings of First Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery, CAOS 2001, Davos, Switzerland. 7-10 February 2001, pp. 22.
21. Taylor, R. H., Joskowicz, L., Williamson, B., Gueziec, A., Kalvin, A., Kazanzides, P., van Vorhis, R., Yao, J., Kumar, R., Bzostek, A., Sahay, A., Borner, M. and Lahmer, A. 1999, Computer-integrated revision total hip replacement surgery: concept and preliminary results. Medical Image Analysis, 3, 301-319, 3.
22. Schneider, J. and Kalender, W., 2001, Geometric accuracy in computer-assisted surgery for total hip replacement. Proceedings of First Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery, CAOS 2001, Davos, Switzerland. 7-10 February 2001, pp. 20.
23. Popescu, F., Viceconti, M., Grazi, E. and Cappello, A. 2003, A new method to compare planned and achieved position of an orthopaedic implant. Computer Methods and Programs in Biomedicine, (submitted).
24. Viceconti, M., Lattanzi, R., Zannoni, C. and Capello, A. 2002, Effect of the display modality on the spatial accuracy of orthopaedic surgery pre-operative planning applications. Medical Informatics and the Internet in Medicine, 1, 21-32, 27.
25. Zannoni, C., Cappello, A. and Vicecontin, M. 1998, Optimal CT scanning plan for long-bone 3-D reconstruction. IEEE Transactions on Medical Imaging, 4, 663-666, 17.
26. Lattanzi, R., Viceconti, M., Zannoni, C., Quadrani, P. and Toni, A. 2002, Hip-Op: an innovative software to plan total hip replacement surgery. Medical Informatics and the Internet in Medicine, 2, 71-83, 27.
27. Testi, D., Zannoni, C., Cappello, A. and Viceconti, M. 2001, Border-tracing algorithm implementation for the femoral geometry reconstruction. Computer Methods and Programs in Biomedicine, 3, 175-182, 65.
28. Lorensen, W. E. and Cline, H. E., 1987, Marching cubes: a high resolution 3D surface construction algorithm. Proceedings of Computer Graphics (SIGGRAPH '87 Proceedings), Anaheim, California. 1987, pp. 163-169.
29. Besl, P. and McKay, N., 1992, A method for registration of 3-D shapes. IEEE Transactions on Pattern Analysis and Machine Intelligence, 2, 239-256, 14.
30. Grood, E. S. and Suntay, W. J., 1983, A joint coordinate system for the clinical description of three-dimensional motions: application to the knee. Journal of Biomechanical Engineering, 2, 136-144, 105.
31. Viceconti, M., Lattanzi, R., Antonietti, B., Paderni, S., Olmi, R., Sudanese, A. and Toni, A. 2003, CT-based surgical planning software improves the accuracy of THR preoperative planning. Medical Engineering & Physics, (in press).
32. Sugano, N., Ohzono, K., Nishii T., Haraguchi, K., Sakai, T. and Ochi, T. 1998, Computed-tomography-based computer preoperative planning for total hip arthroplasty. Computer Aided Surgery, 6, 320-324, 3.